Tel: +86-371-86151827

aircraft coil rope used in irrigation

Steel grade:aircraft coil rope used in irrigation

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aircraft coil rope used in irrigation Introduction

3/16″ Stainless Steel Aircraft Cable Wire Rope 7×19 Type ...

7 x 19 Galvanized Aircraft Cable Wire Rope 3/16" - 100, 250 and 500 ft (100 ft coil) ... u-shaped inside of the ring spacing, larger than a steel wire rope diameter 1~3mm, distance too large do not clamp the rope. When in use, make u-bolts tightened, until about 1/3 up the rope was crushed. ... OrangeA Stainless Steel Cable 3/16" 7 x 19 Winch ...

Heavy Duty Galvanized Aircraft Cable & Wire Rope for ...

Shop for aircraft cable that is used for lifting and rigging. Our product are hot dip galvanized which results in up to 5x thicker zinc coating compared to electro galvanization.

Aircraft Cable Manufacturers | Aircraft Cable Suppliers

Industries such as agriculture, marine, irrigation, and more commonly use this type of cable as do military and aerospace applications. Though these cables are a type of wire rope, the main distinction is that wire ropes are commonly available with diameters no smaller than 1/4inch while aircraft cables with diameters as small as 3/64 inch are ...

TCU Stagecraft Test 3 Flashcards | Quizlet

Coil rope. Used for rope that has been wound into neat circles or loops either ready for use, or for storage. Monkey's Fist. Knot used for clubbing. Mors de Cheval. ... Much more common rigging system, and easier to use. Use aircraft cable, and more moving pieces. Counterweight arbor, rope lock, tensioning block.

Aircraft Cable Manufacturers Suppliers | IQS Directory

Other Updated Information About Aircraft Cabling and Its Current Use. Most users of this cabling prefer stainless steel cables or steel cables that are not coated since this bare cabling will create less friction during assembly usage. Many aircraft cable assemblies consist of cabling that is 7 x 19, 7 x 7 or 1 x 19.

Steel Wire Rope Used On Aircraft Cable - alibaba

Steel Wire Rope Used On Aircraft Cable , Find Complete Details about Steel Wire Rope Used On Aircraft Cable,Steel Wire Rope,Steel Wire Rope Used On Aircraft Cable,Aircraft Wire Rope from Steel Wire Supplier or Manufacturer-Wuxi Shengli Steelrope Co., Ltd.

Rope - Wikipedia

However new lighter-weight ropes with greater safety have virtually replaced this type of rope. The butterfly coil is a method of carrying a rope used by climbers where the rope remains attached to the climber and ready to be uncoiled at short notice. Another method of carrying a rope is the alpine coil. Aerial ropeConstruction·

Everbilt 3/8 in. x 9 ft. Galvanized Cable Sling with Loops ...

Steel with galvanized finish for good weather resistance. Heavy duty. Cable sling with hoops. Working load limit of 2880 lbs. Wire rope is galvanized for added durability. Weather and rust resistant for long lasting use. Each rope has a working load limit of 2880 lbs.User rating: 4.8/5

Rope - WebRiggingSupply

Rotation Resistant Wire Rope. 19×7 Rotation Resistant Wire Rope; 8×25 Rotation Resistant Wire Rope; Swaged Wire Rope; Fabricated Wire Rope Products. Steel Core Tow Truck Winch Lines; Fiber Core Tow Truck Winch Lines; Vinyl Coated Security Cables; Wire Rope Grips; Elevator Wire Rope; Cable. Galvanized Aircraft Cable; Stainless Steel Aircraft ...

Shock Cords / Rings from Aircraft Spruce

Aircraft Spruce supplies components for a wide variety of homebuilt aircraft and discount pilot supplies.

Aircraft Chains - ThomasNet

thomasnet› Supplier DiscoveryManufacturer & distributor of chains including alloy, high tensile transport, high test & proof coil chains suitable for use in the aircraft, marine & other industries. Alloy chains are available in 3/8 in. to 3/4 in. size & are heat treated, proof tested & suitable for overhead lifting applications.

How to Coil and Stow Braided Lines & Ropes | APS Advisor

I learned how to coil air hoses while at Boeing Wichita working in” Modifacation”on B-47 Bombers from an ex-oilfield “Driller”. We just wanted to them in a nice round pile for storing, but not the loops like you got in “Rope” when we run 50- 60 Ft. of 1/4″ hose from an “Air Pig” that was connected by a 1″ hose to a “Power island” next to each Aircraft Parking Space.

TCU Stagecraft Test 3 Flashcards | Quizlet

Usually used with aircraft cable to create an "eye" so the rope maintains a gentle curve and isn't over bent Crosby (wire rope clamp) Used in conjunction with thimble to make loops in aircraft cable.

Wire Rope, Aircraft Cable 7x19, 7x7, 6x19 | Perfection ...

We also carry uncoated and stainless steel wire rope. Our 3/8" or smaller diameter wire rope, generally referred to as "Aircraft Cable," is available in constructions of 7x7 and 7x19, with 7x19 being more flexible. Our larger diameter wire rope is available in 6x19 construction. Coatings and base materials may not be available in all sizes.

Stafford Nut & Bolt | Augusta, Georgia | Products | Chain ...

Also known as double loop chain, this weldless chain is used for tethering and light fixtures. Cable Aircraft cable is a wire rope specified by the notation 7 x 19, which means it had 7 …

Aircraft Chains - ThomasNet

thomasnet› Supplier DiscoveryISO 9001:2000 certified manufacturer of hardware & industrial products including chains used in aircraft applications. Types include welded, welded less & binder chains. Welded chain types include alloy, transport, high test, proof coil, machine link, coil link & passing link chains.

Galvanized Aircraft Cable | Galvanized Wire Cable

Galvanized aircraft cable is used for rope and pulley systems where rope is cycled back and forth over a pulley or sheave. It is more suitable for use in erosion control, irrigation, and the agriculture industry, but has commercial applications such as with exercise equipment or as control cables.

aircraft wire ropes Manufacturer - Absolute Match aircraft ...

Full listing of aircraft wire ropes manufacturer & suppliers online. We have a broad range of aircraft wire ropes and services which can be sourced by this comprehensive vertical web portal dedicated to helping global buyers searching and purchasing from Taiwan and China aircraft wire ropes manufacturers. Inquires are welcome from worldwide agents, importers, chain stores, distributors and ...[PDF]

Form ST-101 Instructions, Sales Tax Resale or Exemption ...

Only aircraft purchased by an airline, charter service, air ambulance service, or air freight company qualify. Parts for the exempt aircraft are also exempt. Examples of aircraft that don’t qualify for this exemption are those used for recreational flights, aerial spraying, dumping, or logging.

Quality Aircraft Cable Manufacturer and Supplier from ...

Quality Aircraft Cable supplies from AGROW. For 15+ years, we specialized in manufacturing and supplies from China serving global Agriculture and Growing industries and markets.

Wire Rope and Aircraft Cable - versales

hat is Wire Rope & Aircraft Cable? The term cable is often used interchangeably with wire rope. However. in general. wire rope refers to diameters larger than 3/8". The smaller sizes are designated as Aircraft cable, cables, or cords. Two or more wires concentrically laid around a center wire is called a strand. It may consist of one or more ...

Galvanized Aircraft Cable - By the Foot - FarmTek

Galvanized Aircraft Cable 5/32" (7x7) - By the Foot 0.19000 /FT * On Qualifying Orders, Shipping to the Contiguous United States, Some Exclusions Apply.

Everbilt 3/8 in. x 9 ft. Galvanized Cable Sling with Loops ...

With excellent flexibility and great abrasion resistant, this Galvanized Cable Sling with Loops that provide the cable with a working load limit of 2880 lbs. Perfect for guide wires, next suspension, Everbilt 3/8 in. x 9 ft. Galvanized Cable Sling with Loops-803042 - The Home DepotUser rating: 4.8/5

Wire Rope - Aircraft Cable, Compacted, Swagged Wire Rope ...

Wire Rope. Most of the wire rope types listed above are available as plastic, nylon, or PVC/vinyl coated wire rope. This wire rope product category is being used in a general sense to classify multiple product families such as Aircraft Cable, Coated Aircraft Cable, general purpose Wire Rope, Strand, Rotation Resistant Wire Rope,...

Amazon: galvanized wire 1/8

500 feet galvanized wire rope aircraft cable Loos Stainless Steel 302/304 Wire Rope, Vinyl Coated, 7x7 Strand Core, Black, 1/16" Bare OD, 1/8" Coated OD, 100' Length, 480 …

poe engineering Flashcards and Study Sets | Quizlet

Design, develop, and test aircraft and space craft ranging fro… Creates technology to advance food, biological, irrigation, an… Devise procedures and devices to improve medical conditions.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.