Tel: +86-371-86151827

aluminum alloy coated steel sheet

Steel grade:aluminum alloy coated steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aluminum alloy coated steel sheet Introduction

Aluminized steel - Wikipedia

Aluminized steel is steel that has been hot-dip coated on both sides with aluminium-silicon alloy.This process assures a tight metallurgical bond between the steel sheet and its aluminium coating, producing a material with a unique combination of properties possessed neither by steel nor by aluminium alone. Aluminized steel shows a better behavior against corrosion and keeps the properties of ...

aluminum zinc alloy coated steel sheet- Aluminum/Al foil ...

aluminum zinc alloy coated steel sheet . If you have any questions or good suggestions on our products and site, or if you want to know more information about our products, please write them and send to us, we will contact you within one business day.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

sheet and strip Sn-Zn coated steel sheet and strip Electrolytic zinc-coated steel sheet and strip Electrolytic zinc-nickel alloy-coated steel sheet and strip Zn-Si-Ni alloy coated steel sheet and strip Nickel Coated Steel Sheet and strip Topcoat Base metal Zn Hot-dip zinc-aluminum-magnesium-silicon alloy coated steel sheet and strip Hot-dip 55% ...[PDF]

Zinc-5% Aluminum Alloy-Coated Steel Sheet SDS …

Zinc-5% Aluminum Alloy-Coated Sheet Steel is not exempt as an article under OSHA's Hazard Communication Standard (29 CFR 1910.1200) due to its downstream use, thus this product is considered a mixture and a hazardous material. Therefore, the categories of Health Hazards as[PDF]

55% Aluminum-Zinc Alloy Coated Steel - Cascadia Metals

The single aspect most frequently vexing prospective users of zinc-coated and zinc/aluminum alloy-coated steel sheet is cut edge performance. It is an established fact the sacrificial protection afforded to the steel at cut edges will delay corrosion while there is …

Zinc Aluminum-Magnesium Coated Steel Sheets & Coils|Zam ...

Zinc Aluminum-Magnesium Coated Steel Conception. This Zinc Aluminum-Magnesium Coated Steel Sheet in Coils which is also called ZAM coated steel is our mill newly developed with coating layers of 100-450g +/-10g which owns very strong corrosion-resistant ability.

Aluminum- Zinc alloy Coated Steel Sheet (ALCOAT)

Aluminum-Zinc Alloy Coated Steel Sheet - Galvalume. The alloy coating comprises about 55% aluminum, 43.4% zinc and 1.6% silicon. This coating combines the superior corrosion resistance of aluminum with the cut edge protection of zinc.

Hot Dip Aluminium Coated Steel Sheet (AL COAT) — BARO …

Hot Dip Aluminium Coated Steel Sheet (AL-COAT) Product Features . Hot-dip aluminum coated steel sheet combines the mechanical properties of cold-rolled steel sheet with aluminum’s high resistance retention, heat reflection, and superior rust resistance.[PDF]

55% Aluminum-Zinc Alloy Coated Steel - Cascadia Metals

The single aspect most frequently vexing prospective users of zinc-coated and zinc/aluminum alloy-coated steel sheet is cut edge performance. It is an established fact the sacrificial protection afforded to the steel at cut edges will delay corrosion while there is zinc or zinc/aluminum alloy …

Aluminum- Zinc alloy Coated Steel Sheet (ALCOAT)

Aluminum-Zinc Alloy Coated Steel Sheet - Galvalume. The alloy coating comprises about 55% aluminum, 43.4% zinc and 1.6% silicon. This coating combines the superior corrosion resistance of aluminum with the cut edge protection of zinc.

Hot Dip Aluminium Coated Steel Sheet (AL COAT) — BARO METAL

Hot Dip Aluminium Coated Steel Sheet (AL-COAT) Product Features . Hot-dip aluminum coated steel sheet combines the mechanical properties of cold-rolled steel sheet with aluminum’s high resistance retention, heat reflection, and superior rust resistance.

Aluminised Steel Coil and Sheet. Aluminium-silicon alloy ...

Aluminized steel is hot-dip coated on both sides with aluminium-silicon alloy. This process assures a tight metallurgical bond between the steel sheet and its aluminium coating, producing a material with a unique combination of properties possessed neither by steel nor by aluminium alone.

Aluminum Alloy Sheets | McMaster-Carr

Choose from our selection of aluminum alloy sheets, including multipurpose aluminum, highly corrosion-resistant aluminum, and more. ... 17-4 PH Stainless Steel Sheets 17-4 PH Stainless Steel Shim Stock Sheets 17-7 PH Stainless Steel Sheets 2205 Stainless Steel Sheets 301 ... The anodized coating forms a bond with the aluminum to increase ...

Metallic coated strip - Australian Steel Products

A zinc & aluminium alloy coating combines the best features of both aluminium and zinc coatings. The continuous hot-dip metallic coating lines operated by BlueScope Steel Australia produce a range of zinc-coated and zinc and aluminium coated steel sheet and strip products to meet the requirements of manufacturers in Australia.

AluZinc Alloy Coated Steel ALZN - bsstainless

bsstainless› Products› OtherWe offer steel sheet that has an alloy coating of Aluminium and zinc often used in the insulation and ventilation industry commonly referred to by the trademark Aluzinc. It is a good substrate for organic coating it is generally used in the manufacture of wide sections for wall cladding and insulation cladding.

ASTM A755 / A755M - 18 Standard Specification for Steel ...

A792/A792M Specification for Steel Sheet, 55% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process. A875/A875M Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process. A902 Terminology Relating to Metallic Coated Steel Products. A924/A924M Specification for General Requirements for Steel Sheet, Metallic-Coated by the ...

Zinc aluminum Alloy Coated Steel Sheet In Coil

Zinc Aluminum-Magnesium Coated Steel - sinowellmetalThe corrosion resistance of this zinc aluminum magnesium alloy coated steel sheet is 5 to 10 times higher than that of the hot-dip galvanized steel sheet. And is also better than galvalume steel sheets on corrosion resistance property.

Spray Coat Aluminum Sheet - SAF - Southern Aluminum ...

Before we spray coat flat aluminum sheet, we make sure our customers know color will differ from coil coated sheet. Specifically, spray coated flat sheet will not be perfectly flat because of the warp imparted by the high temperatures required to cure PVDF. Spray coated sheets will have rack marks in each of the four corners and the surface ...

Sega International

Aluminized steel is steel that is Hot-Dipped coated both sides with Aluminum-Silicon alloy. This process assures a tight metallurgical bond between the steel sheet and its aluminum coating, producing a material with a unique combination of properties possessed neither by steel nor by aluminum alone.[PDF]

Hot-Dip Zn-5% Al Alloy-coated Steel Sheets “JFE …

ity properties of the coating of various types of Zn-Al coated steel sheets, generally by modifying the composi-tion ratio or adding different elements4). In 1990, GF was standardized under JIG G 3317 “Hot-dip zinc-5% aluminium alloy-coated steel sheet and strip,” and prepainted products of …Authors: Fujisawa Hideshi · Ishikawa HiroshiAbout: Corrosion · Building material[PDF]

ASTM COATING WEIGHT DESIGNATION OF COATED …

ASTM Coating Weight Designation of Coated Sheet Steel for Construction Applications 3 minimum triple-spot average for one side and a single-spot minimum coating weight for the total of both sides. This ensures standards of uniformity. This is significant because typical applications require most of the corrosion protection on just one side.

Standard Specification for Steel Sheet, Zinc-5 % Aluminum ...

A875 / A875M-13 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process coating weight~ formability~ hot-dip galvanizing~ steel sheets~ zinc-aluminum alloy-coated steel sheets~ zinc-aluminum-mischmetal alloy-coated steel sheets~

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.