Tel: +86-371-86151827

s31600 stainless steel cold rolled steel sheet 301

Steel grade:s31600 stainless steel cold rolled steel sheet 301

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s31600 stainless steel cold rolled steel sheet 301 Introduction

Stainless Steel Type 301 - Rolled Metal Products - Stainless

In the annealed condition, Type 301 offers the highest level of stretch formability of any stainless steel and in the heavily cold worked condition offers the highest strength level of any 300 series stainless steel. Type 301 is non-magnetic in the annealed condition but becomes magnetic as a result of cold …

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Cold rolled coil, strip and sheet are produced in all stainless steel types: austenitic, ferritic, duplex and martensitic. A wide selection of standard and special surface finishes provide a unique level of customization. Outokumpu offering includes semi-cold rolled surface RAP®2E: it is cold rolled, heat treated, mechanically descaled and ...

Cold Rolled Commercial Steel vs. 304 Stainless Steel ...

CRS vs. 304 Stainless Steel. The difference between CRS and 304 stainless steel is that CRS is a process and 304 is an alloy. Steel, hot or cold rolled, will rust and corrode. It is used in applications where that is not a consideration. Stainless steel is an alloy with …

Experienced supplier of uns s31600 stainless steel,S31600 ...

Home > Products > Stainless Steels > Austenitic > 316/S31600/SUS 316 Stainless Steel 316/S31600/SUS 316 Stainless Steel If you are planning to buy 316 stainless steel, 316 bar, 316 pipe, 316 sheet, 316 fittings, 316 flange ect, please feel free to contact Bozhong Group, equipped with productive factory, we are always at your service.

Stainless Steel Supplier: Sheets & Coils | Mead Metals

Our stainless steel offerings are available in thicknesses ranging from 0.005 to 0.134. 301 STAINLESS STEEL. We stock 301 stainless steel in quarter hard to full hard tempers. AISI 301 stainless steel is austenitic, and due to its lower chromium-nickel content, it hardens through the cold working process more quickly than other grades.[PDF]

301 STAINLESS STEEL - AK Steel Holding

Type 301 is an austenitic chromium-nickel stainless steel. This alloy is non-magnetic in the annealed condition, but becomes magnetic when cold worked. Within the scope of the ASTM Type 301 specification, chemical composition and processing modifications can result in a wide range of engineered material properties targeted at specific applications.

301 Stainless Steel products in Stock - Penn Stainless ...

301 Stainless Steel. Penn Stainless inventory now includes Alloy 301 (UNS S30100) in sheet and sheet coil with short delivery. This grade is inventoried in three coniditoins: 1/4 hard, 1/2 hard, Full hard.

Low-Temperature Properties of Cold-Rolled AISI Types 301 ...

Low-Temperature Properties of Cold-Rolled AISI Types 301, 302, 304ELC, and 310 Stainless Steel Sheet. ... ADD TO CART: Source: STP46984S. Reprints and Permissions . Abstract. The cold-rolled austenitic stainless steels have assumed an important position in missile and space vehicle applications where they are used as skins and other highly ...Cited by: 2

Cold Rolled Sheet | North American Stainless

Cold Rolled Sheet. NAS offers cold rolled annealed and pickled product in multiple finishes and dimensions. Our cold rolled sheet product is available in variable widths and lengths and as sheets and blanks that can be cut at the mill or at our various processing centers throughout the U.S.

Cold Rolled Steel Sheet | Cold Rolled Steel Plate

Cold Rolled Steel Sheet Cold rolled steel sheet is, essentially, hot rolled steel that has been further processed to increase its strength and strength-to-weight ratio. In general, cold rolled steel sheet can hold tighter tolerances than hot rolled when machined or otherwise fabricated, and provides a better overall surface finish.

304/304L cold rolled stainless steel sheet

304/304L cold rolled stainless steel sheet. About 304 material and 304L material: 304 stainless steel is a common material, a density of 7.93 g / cm3, the industry alsoknown as 18/8 stainless steel.

Stainless Steel 316 / 316L Sheets, Plates & Coils

WERKSTOFF NR. 1.4404/1.4435 Sheets, Plates & Coils, ASTM A240 Stainless Steel 316 Hot Rolled Plate, UNS S31600 Sheets and Plates, SS 316 Sheets, SS 316L Plates, SS 316 Coils, UNS S31603 Sheets and Coils, DIN 1.4401/1.4436 Plates and Coils, SS 316/316L Cold Rolled Sheet, SS 316/316L Sheets, Plates & Coils Supplier in Mumbai, India.

316 Best Price Cold Rolled 3.2mm Stainless Steel Rod

STAINLESS STEEL STAINLESS STEELUSERS GUIDE STAINLESS STEEL Austenitic Stainless Steel [301, 304, 304L, 316, 2D Cold-rolled, Fully Threaded Rod, 18-8 Stainless Steel, Uncoated (Bright Price; In Stock Only All: All: All B000FMWUOC: 72 inches 316 Stainless Steel Fully Threaded Rod, Plain Finish, Right Hand 4.7 out of 5 stars 3.

316 Stainless Steel UNS S31600 | Ulbrich

316 Stainless Steel UNS S31600 Download Datasheet. Strip, Coil, Foil, Wire, ASTM A666, AMS5524 ... #2 - Cold Rolled # 2BA- Smooth finish produced by cold rolling and bright annealing. A light pass using highly polished rolls produces a glossy finish. ... In no event will Ulbrich Stainless Steels & Special Metals, Inc., be liable for any damages ...

301 Stainless Steel 1/2 Hard Cold Rolled Strip & Coils ...

precisionsteel› Stainless Steel› 301 Stainless SteelFlatness - Because of the wide range of widths and thicknesses and the variety of tempers produced in coils and cut lengths, no flatness tolerances have been established for cold rolled stainless steel. Flatness on temper rolled 301 half hard stainless steel strip cannot be guaranteed.

UNS S31600 Austenitic Molybdenum Stainless Steel

Why S31600 called Grade 316 Stainless Steel? When a material grade is specified as stainless steel, it means it has chromium content but this grade has molybdenum in it that makes it different. S31600 is the UNS designation alloy, also referred as 316 alloy in SAE designation and …

316 stainless steel sheet specification

The product is mostly coil, sheet,and blanks. Stainless Steel Sheets | 303, 304, 316, 347, 13-8, 15-5 & 17-4 . We offer several sizes and grades of stainless steel sheet on hand to serve yourneeds. 316 Stainless Steel - Best used in severe environments as it has ahigher level of corrosion Grade, Specification, Stock Sizes, Material Data Sheet.

301 Stainless Steel - NKS

Description: Type 301 Stainless Steel is an austenitic chromium-nickel stainless steel that provides high strength and good ductility when cold worked. The chromium and nickel contents are lowered to increase the cold work-hardening rate. This generates higher tensile strengths when cold rolled with a lower loss of ductility than with Types 302 and 304.

Cold rolled Sus 202 304 stainless steel plate

corrosion resistance 304 cold rolled plate; CARBON WELDED STEEL PIPES 3 1 2; Hot rolled shipbuilding steel sheet; monel k 500 round bar; 1J34 precision alloy in Iran; Stainless Steel 1.4436 AISI 316 S31600 Bar; Buy Stainless Steel Price Per Meter; Boiler and Pressure Vessel Steel Plate; 630 stainless flat steel bar; Embossed Stainless Steel ...

301 Stainless Sheet, 1/2 Hard - Online Metal Store

301 Stainless Sheet, 1/2 Hard. Stainless Steel Sheet T-301 (1/2 Hard) is ideal for applications requiring both formability and tensile strength. Its high strength, corrosion resistance, and attractive appearance make 301 stainless steel sheet an excellent choice for structural as well as decorative applications.

cold rolled 304 hl stainless steel sheet

· PDF 공가능 공가능 당사특화제품 BAF 스테인리스 냉연강판 Cold Rolled Stainless Steel Coil and Sheet 스테인리스 310s 내열강 Heat Resisting Stainless Steel(310S) 취급품목 Sheet, Coil, Hoop 판매강종 304(L), 316(L), 310S, 321 430, 439(L), 443CT, 445NF. Learn more

301-1/2 Hard Tempered Stainless Steel Sheet & Coil - AMS …

301-1/2 Hard is an austenitic stainless steel that it has been cold rolled to its 1/2 hard condition. This makes it ideal for applications requiring both formability and tensile strength of 150,000 PSI and yield strength of 110,000 PSI.[PDF]

Stainless Steel Grade Datasheets - Atlas Steels

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

ASTM A480 Stainless Steel Plate/ Sheet/ Coil | Linkun

ASTM A480 Stainless Steel plate is Suitable for processing, storage and transportation of food.Linkun stock extensive ASTM A480 stainless steel plate/sheet/coil,Any needs or interests,please feel free to …[PDF]

AN/onglets/Fetmet/ Page 19 STAINLESS STEEL

STAINLESS STEEL FINISHES SHEET: – No. 1 Hot Rolled, Annealed & Pickled. A dull finish used in applications where surface smoothness and uniformity of appearance are not of prime importance. No. 2B Bright Cold Rolled. A general purpose Cold Rolled Finish. Its surface finish varies depending upon stainless type and thickness.

AISI 316 (S31600) Stainless Steel :: MakeItFrom

AISI 316 stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 316 is the AISI designation for this material. S31600 is the UNS number. Additionally, the British Standard (BS) designation is 316S16.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.