Tel: +86-371-86151827

hot dipped cold rolled sheet

Steel grade:hot dipped cold rolled sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot dipped cold rolled sheet Introduction

Hot Dipped Galvanized – Rolled Steel Products « Rolled ...

Hot Dipped Galvanized – sheet or strip steel bathed in a molten solution containing not less than 98% pure zinc to uniformly coat for corrosion resistance. The coating is not intended to withstand outdoor exposure without chemical treatment or painting. Sheets are produced as commercial quality, drawing quality, drawing quality special killed, structural, physical quality, and are available ...

Cold rolled steel sheets hot dipped galvanised - ALFUN

Cold rolled steel sheets hot dipped galvanised Due to the fact that carbon steel is highly prone to corrosion, the steel sheets and strips are protected by a continual hot dip galvanising process, using Zinc (Zn), Zinc-Iron alloy (ZF), Zinc-Aluminium alloy (ZA), Aluminium-Zinc alloy (AZ) or Aluminium-Silicium alloy (AS).[PDF]

PROPERTIES FOR STEEL SHEETS – COLD ROLLED & HOT …

INDUSTRY PROPERTIES FOR STEEL SHEETS – COLD ROLLED & HOT DIPPED ZINC COATED Typical Ranges For Mechanical Properties – Yield And Elongation Are Nonmandatory Cold Rolled C% Mn% P% S% Al% Hardness¹ Yield ksi Elong% r-value n-value CS Type A 0.10 max 0.60 max 0.030 max 0.035 max * B65 max 20-40 30 min – –

Galvanized Vs. Cold Rolled Steel | Hunker

Although cold-rolled steel can be galvanized, products you buy that are made from galvanized steel may also have been formed through hot-rolling. Compared to cold-rolling, hot-rolled steel has higher yield strength and less grain deformation, because the cold-rolling squashes the steel so that the microscopic "grain structure" resembles an oval ...

Q235 COLD ROLLED HOT DIPPED STEEL COIL

q235 cold rolled hot dipped steel coil: Stainless Steel Sheet/Coil Supplier-Miele Metal Stainless Steel Products Procurement Platform - MieleMetal We only supply you the goods with the best quality, but not the most expensive.

Steel Dynamics, Inc. - Cold Rolled Galvanized Steel Sheet

Produced at our Butler and Jeffersonville, Indiana, facilities, our cold-rolled galvanized steel sheet is well-suited to surface-critical applications. In addition to our standard spangle-free finish, we also offer galvannealed coatings at Butler for enhanced weldability or paintability.

Steel Dynamics, Inc. - Hot Rolled Galvanized Steel Sheet

We galvanize both hot-rolled and cold-rolled steel sheet in various widths and gauges. Our hot-rolled galvanized steel sheet provides a cost-effective solution for heavy-gauge, unexposed applications. Our hot-rolled galvanized steel sheet has a spangle-free finish.

Galvanized Steel – Berlin Metals

berlinmetals› ProductsCold reduced sheet steel material in coil form (hot rolled pickled is sometime used) is uncoiled and passed continuously through the galvanizing line equipment. Several designs of continuous lines have been used. One of the types most frequently used today has a continuous anneal section.

Cold rolled Hot Dipped Steel Sheet - w3s.in

Cold rolled steel sheets hot dipped galvanised - ALFUN. Cold rolled steel sheets hot dipped galvanised Due to the fact that carbon steel is highly prone to corrosion, the steel sheets and strips are protected by a continual hot dip galvanising process, using Zinc (Zn), Zinc-Iron alloy (ZF), Zinc-Aluminium alloy (ZA), Aluminium-Zinc alloy (AZ ...

Cold rolled steel sheets hot dipped galvanised - ALFUN

Cold rolled steel sheets hot dipped galvanised Due to the fact that carbon steel is highly prone to corrosion, the steel sheets and strips are protected by a continual hot dip galvanising process, using Zinc (Zn), Zinc-Iron alloy (ZF), Zinc-Aluminium alloy (ZA), Aluminium-Zinc alloy (AZ) or Aluminium-Silicium alloy (AS).

US cold-rolled coil, hot-dipped galvanized steel sheet ...

US prices for cold rolled coil and hot dipped galvanized sheet prices continued to drop Monday amid more year end buying and wide offer ranges.

Cold rolled Hot Dipped Steel Sheet - w3s.in

Cold rolled steel sheets hot dipped galvanised - ALFUN. Cold rolled steel sheets hot dipped galvanised Due to the fact that carbon steel is highly prone to corrosion, the steel sheets and strips are protected by a continual hot dip galvanising process, using Zinc (Zn), Zinc-Iron alloy (ZF), Zinc-Aluminium alloy (ZA), Aluminium-Zinc alloy (AZ ...

Steel Dynamics, Inc. - Cold Rolled Galvanized Steel Sheet

Produced at our Butler and Jeffersonville, Indiana, facilities, our cold-rolled galvanized steel sheet is well-suited to surface-critical applications. In addition to our standard spangle-free finish, we also offer galvannealed coatings at Butler for enhanced weldability or paintability.

Difference Between Hot and Cold Rolled Steel | Metal ...

Cold finished bars are typically harder to work with than hot rolled due to the increased carbon content. However, this cannot be said about cold rolled sheet and hot rolled sheet. With these two products, the cold rolled product has low carbon content and it is typically annealed, making it softer than hot rolled sheet.

Hot Dip Cold Rolled, Hot Dip Cold Rolled Suppliers and ...

Alibaba offers 52,899 hot dip cold rolled products. About 63% of these are steel sheets, 1% are stainless steel sheets. A wide variety of hot dip cold rolled options are …

Hot Dipped Galvanized Sheet/Plate (GI Sheet) – Jiang Lin ...

Hot Dipped Galvanized Sheet/Plate (GI Sheet) Hot. Hot Dipped Galvanized Sheet/Plate (GI Sheet) ... Some of the cold rolled coils are sold to different factories. For thickness, we focus on 0.3-0.8mm. Most of Shandong market galvanized coil are from Jianglin. 3.PPGL and PPGI Production Line.

China Cold Rolled Coil, Hot-Dipped Galvanized Steel ...

Full hard cold rolled coils, black annealed cold rolled coils, galvanized steel coils, and preprinted (color-coated) galvanized steel coils are our products. Anshan Linghong International Trade Co., Ltd. is the exporting company of Liaoning Yinheng Steel Co.,Ltd

Hot Dipped Galvanized Steel Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Coated SteelProtect against corrosion with hot dipped galvanized steel products from Alliance Steel. Hot dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a …

Stainless Steel Sheets, Cold Rolled Steel & Galvanized ...

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.

Hot and Cold Rolled Steel Explained - MST Steel Corp

MST Hot Rolled Steel MST Cold Rolled Steel ROLLING (METALWORKING) In metalworking, rolling is a metal forming process in which metal stock is passed through one or more pairs of rolls to reduce the thickness and to make the thickness uniform. The concept is similar to the rolling of dough. Rolling is classified according to the temperature of the metal rolled.

Steel Sheets | KOBE STEEL, LTD.

Steel Sheet Products. High-tensile strength steel sheets, coated steel sheets, and pre-coated steel sheets, which meet the advanced needs of automobiles and home electric appliances, and the environmentally friendly “Greencote ® ” are manufactured by Kobe Steel. In particular, we have been engaged in the research and development of high-tensile strength steel sheets with excellent ...

Aluminized Steel & Aluminum ... - Rolled Steel Products

Available in sheet and strip. Aluminized Steel ASTM A-463. This specification covers aluminum-coated steel sheet in coils and cut lengths available with two types of aluminum coating applied by the hot-dip process, with several coating weights. The heat analysis of the base metal shall conform to the requirements specified.[PDF]

FLAT ROLLED PRODUCTS - ussteel

Hot Rolled Sheet Steel Hot Rolled Sheet Steel is an unprocessed, mill edge coiled product and does not include any processing such as temper rolling, tension leveling, pickling, oiling or side trimming. Hot Rolled products are produced to ASTM Specifications A1011, A659, A635 or A1018. Product is …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.