Tel: +86-371-86151827

asme sa516 grade 65 steel plate property

Steel grade:asme sa516 grade 65 steel plate property

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

asme sa516 grade 65 steel plate property Introduction

Asme sa516 grade 70|sa516 grade 60 steel plate specification

ASME SA516 grade introduction: SA516 grade 55, SA516 grade 60, SA516 grade 65, SA516 grade 70. These 4 grades are mainly defined by their different tensile and yield strength range, which is influenced by content of Carbon. For example sa 516 grade 70 has the highest tensile and yield strength range due to the highest Carbon content(up to0.28%).

ASME SA516 Plate - SA516 Steel Plate Grades 60, 65, and 70 ...

universalsteelamerica› Steel Plate ProductsUniversal Steel stocks SA516 in the as-rolled, normalized, and HIC tested conditions, with thicknesses ranging from 3/16” up to 12.5” thick. SA516 material is available in grades 60, 65, and 70. Specialized testing and chemical or physical requirements vary depending on the specific final application of the steel plate.

ASME SA516 Grade 65 - steelforgepieces

ASTM A516 Grade 65 owned a higher yield strength and tensile strength comparing with boiler steel A516 Grade 65 and A516 Grade 60.Besides Ultrasonic examination,charpy V-notch impact test and simulated post-weld heat treatment of mechanical coupons shall be chosed by the end users when ordered these pressure vessel steel plates A516 Grade 65.

ASME SA516 / ASTM A516 - Gr. 65 - Brown McFarlane

Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service. Plates certified to ASME SA516 Gr. 65 and ASTM A516 Gr. 65 are held in stock in Brown McFarlane’s stockholding and processing facilities in Stoke-on-Trent in the U.K.

ASME SA516 Grade 60|ASME SA516GR.60 steel plate

SA516 Grade 60 steel grades is used in moderate and lower temperature pressure vessels steel because of the steel material chemical composition and the property in welding. For the reason of excellent notch toughness and weld ability of SA516 Grade 60, it …

ASTM A516 Grade 65 and ASME SA516 Grade 65 Carbon …

Jul 13, 2009· Are you looking for quality carbon steel plate for boiler and pressure vessel fabrication? Masteel stock a wide range of steel plates according to ASTM A516 Grade 65 and ASME SA516 Grade 65. View this article for more technical details.Author: Masteel UK Ltd

ASTM A516 Gr55/60/65/70 carbon steel plates for pressure ...

This specification of ASTM A516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The most common is Grade …

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

ASTM A516 Carbon Steel, Grade 65 - MatWeb

SA516, ASTM A285, Carbon steel plate for moderate and lower temperature service. Pressure vessel quality ... ASTM A516 Carbon Steel, Grade 65 Categories: Metal; Ferrous Metal; Alloy ... Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

ASTM A516/ ASME SA516 PVQ Steel Plate | BBN Steel

SA516 is a carbon steel plate grade utilized primarily in welded pressure vessels for moderate to lower temperature service. This material is produced in grades 55, 60, 65 and 70. This material is also offered in the normalized condition where improved notch toughness is required.

Asme SA516 Grade 70|SA516 Grade 60 Steel Plate Specification.

ASTM/ASME SA516 specification covers carbon steel plates produced mainly for application in welded pressure vessels,grade introduction SA516 grade 55, SA516 grade 60, SA516 grade 65, SA516 grade …

ASME SA516 Grade 70|ASME SA516GR.70 steel plate

SA516 Grade 70 steel grade is a advantage Gangsteel company, we exported the super thickness steel plate max 135mm in SA516 Grade 70 to Singapore in the best quality. Our leader is the sales department manager of mill to promise the competitive price and the fastest delivery time to your projects.

SA516Gr70|ASME SA516 Grade 70|SA516 Gr.70 STEEL PLATE ...

sa516gr70|asme sa516 grade 70|sa516 gr.70 steel plate ASME SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASME SA516 plates 40mm and under in thickness is normally supplied in the as-rolled condition.

ASTM A516 Grade 65 Plates, ASME SA 516 GR.65, SA516 Grade ...

ASTM A516 Grade 65 Carbon Steel Plates “Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, is widely used by designers and engineers . ASTM A516 Grade 65 carbon steel plates is one of the most popular steels for boilers, pressure vessels and heat exchangers. SA516 GR.65 plate is excellent at low temperature and have good results ...

ASME SA516 Grade 70 steel plate property - thehandler.nl

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon . Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

ASME SA516 Grade 60|ASME SA516GR.60 steel plate

SA516 Grade 60 steel grades is used in moderate and lower temperature pressure vessels steel because of the steel material chemical composition and the property in welding. For the reason of excellent notch toughness and weld ability of SA516 Grade 60, it …

ASME SA516/70 As Rolled, Domestic Origin – Ranger Steel

ASME SA516/70 As Rolled, Domestic Origin. A pressure vessel quality plate (PVQ) for moderate and lower – temperature service. It is produced in grades 55, 60, 65 and 70, with Grade 70 being the most common and readily available from stock. This grade is produced in …

SA516Gr65|ASME SA516 Grade 65|SA516 Gr 65 STEEL PLATE ...

sa516gr65|asme sa516 grade 65|sa516 gr 65 steel plate ASME SA516 standard specification for pressure vessel plates, carbon steel for moderate and lower- temperature service. ASME SA516 plates 40mm and under in thickness is normally supplied in the as-rolled condition.

ASTM A516 Grade 65 and ASME SA516 Grade 65 Carbon Steel …

Are you looking for quality carbon steel plate for boiler and pressure vessel fabrication? Masteel stock a wide range of steel plates according to ASTM A516 Grade 65 and ASME SA516 Grade 65. View this article for more technical details.

ASTM A516 Carbon Steel, Grade 65 - MatWeb

SA516, ASTM A285, Carbon steel plate for moderate and lower temperature service. Pressure vessel quality ... ASTM A516 Carbon Steel, Grade 65 Categories: Metal; Ferrous Metal; Alloy ... Click here to view all the property values for this datasheet as they were originally entered into MatWeb.

A516Gr65 - BEBON steel - steel-plate-sheet

ASTM A516 Gr 65 steel plate/sheet, ASTM A516 Grade 65 steel plate/sheet, under ASTM standard, we can regard A516 Gr 65 steel plate/sheet for simple pressure vessels steel.. ASTM A516Gr65/ ASME SA516 Gr 65 is an excellent weldable carbon steel choice for pressure vessels and boiler fabrication. The material offers excellent performance in lower than ambient temperature service, has good ...

ASME SA516 Grade 60(SA516GR60) Pressure Vessel And …

Any request for ASME SA516 Grade 60(SA516GR60) Pressure Vessel And Boiler Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

ASTM A516 Gr55/60/65/70 carbon steel plates for pressure ...

This specification of ASTM A516 covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The most common is Grade …

ASME SA516 Grade 65| SA516 Grade 65 Plate| SA516 Grade 65 ...

ASME SA516 Grade 65 Standard steel plates are intended for use in pressure vessels where increased strength is is important. ASTM A516 Grade 65 steel is one of the most popular steels for boilers, pressure vessels and heat exchangers. It is excellent at low temperature and have good results on standard Charpy V Notch toughness tests.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.