Tel: +86-371-86151827

ms plate carbon iron sheet steels

Steel grade:ms plate carbon iron sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

ms plate carbon iron sheet steels Introduction

carbon steel plate sheet ms plate - hopkinsplasticsurgery

Special Steels - Carbon Steel, Alloy Steel, Free Cutting, … Manufacturer of Special Steels - Carbon Steel, Alloy Steel, Free Cutting, etc - RINL VSP Steel Bars EN8 / EN8D / C45 / CK45 / EN8DS, RINL VSP EN8 / C45 / Ck45 / 45C8 / S40C Medium Carbon Steel, RINLVSP MS …

astm a621 carbon steel - MS Plates - napmr.org

We also have a high quality logistics team who make sure the fast delivery time and shipment. Anyway, if you want to find astm a621 carbon steel, MS Plates plate/sheet bar supplier, astm a621 carbon steel, MS Plates plate/sheet bar manufacturer, astm a621 carbon steel, MS Plates plate/sheet bar exporter, please contact steel's sales team.

carbon mild steel sheet ms steel plate

Special Steels - Carbon Steel, Alloy Steel, Free Cutting, … Manufacturer of Special Steels - Carbon Steel, Alloy Steel, Free Cutting, etc - RINL VSP Steel Bars EN8 / EN8D / C45 / CK45 / EN8DS, RINL VSP EN8 / C45 / Ck45 / 45C8 / S40C Medium Carbon Steel, RINLVSP MS …

carbon steel grade a vs grade b - MS Plates - napmr.org

carbon steel grade a vs grade b, steel,Hot sell carbon steel grade a vs grade b, MS Plates stock in China,China carbon steel grade a vs grade b, MS Plates factory. Keeps more than 10,000 tons hot rolled and cold rolled carbon steel grade a vs grade b, MS Plates in stock each month. We can meet our customer's any quantity request.

What Is the Difference Between Sheet & Plate Steel ...

Steel is an alloy of iron that has enhanced chemical and physical properties. The most commonly found steels are alloyed with between 0.2 percent and 2.15 percent of carbon, but some steels can be found that are alloyed with other materials like tungsten, chromium, vanadium and manganese. ... "What Is the Difference Between Sheet & Plate Steel ...

What is the difference between carbon steel and mild steel ...

Sep 22, 2018· The difference is the amount of carbon.Mild steel has small amounts of carbon between 0.16 and 0.3%.Carbon steel has more carbon, up to 2%, and this allows it to be hardened and tempered.The hardness increasing as the carbon content increases.Normally mild steel are forged and fabricated into steel plates, while carbon Steel are made into pulleys and drive shafts.What is the difference between structural steel and mild ...Jan 17, 2019Which is stronger stainless steel or carbon steel?Jan 16, 2019What is Mild Steel and what are the various grades of mild ...Aug 30, 2018See more results

Swastik Iron & Steel Co. - Wholesale Trader of Boiler ...

We, Swastik Iron & Steel Co., established in the year 1998, are considered to be one of the leading manufacturers, suppliers, wholesalers and traders of the best quality of Steel Plate & Angle. The product range offered by us consists of Boiler Steel Plate, Structural Steels and Ship Building Plates.

Ms Sheet Wholesale, Ms Suppliers - Alibaba

Alibaba offers 12,872 ms sheet products. About 36% of these are steel sheets, 1% are plastic extruders, and 1% are tool parts. A wide variety of ms sheet options are available to you, such as coil, plate, and spring steel bar.

Iron Plate, Iron Plate Suppliers and Manufacturers at ...

Alibaba offers 169,987 iron plate products. About 14% of these are steel sheets, 2% are dishes & plates, and 1% are dinnerware sets. A wide variety of iron plate options are available to …

The Four Types of Steel | Metal Supermarkets

All steel is composed of iron and carbon. It is the amount of carbon, and the additional alloys that determine the properties of each grade. ... tubes, sheets and plates. We can cut metal to your exact specifications. Visit one of our 80+ locations in North America today. Share: Metal Supermarkets – Steel, Aluminum, Stainless, Hot-Rolled ...

carbon steel plate sheet ms plate - hopkinsplasticsurgery

Special Steels - Carbon Steel, Alloy Steel, Free Cutting, … Manufacturer of Special Steels - Carbon Steel, Alloy Steel, Free Cutting, etc - RINL VSP Steel Bars EN8 / EN8D / C45 / CK45 / EN8DS, RINL VSP EN8 / C45 / Ck45 / 45C8 / S40C Medium Carbon Steel, RINLVSP MS …

Mild Steel MS Sheet Plate :/: Mild Steel MS Sheet Plate on ...

Anita Steel is a ISO 9001: 2000 Company in Mumbai India, We Manufacture & Supply All Type of Quality Pipe Fitting @ Best Price !, Mfr. ms & cs pipe fittings/Mumbai, Find Quality Products from Verified Manufacturers. Get a Live Quote Now, Buy Steel Mild Steel MS Sheet Plate @ Mill price in India

Manufacturer of MS Plate & MS Sheet by Rachit Iron And ...

Rachit Iron And Steels Private Limited - Manufacturer of MS Plate, MS Sheet & MS Channel from Kanpur, Uttar Pradesh, India. Rachit Iron And Steels Private Limited - Manufacturer of MS Plate, MS Sheet & MS Channel from Kanpur, Uttar Pradesh, India Rachit Iron And Steels Private Limited. Darshan Purwa, Kanpur, Uttar Pradesh ...

What is the composition of mild steel? - Quora

Mild steel covers a range of standards but generally refers to a low alloy, low carbon steel, typically, less than 0.3% carbon my mass. The ocntent of other alloying elements is typically limited to things like manganese which is used to mitigate sulphur impurities and other traces from the manufacturing process like phosphorus and silcon.

Carbon Steel - Mielemetal

Cold - rolled plate iron sheet tensile plate low carbon steel coil. full hard & soft cold rolled carbon steel coil. kitchen applicances hot rolled steel coil. sae 1006 hot rolled carbon steel coil. hot rolled carbon steel ms steel coil. Hot Rolled Steel Coil. SAE5140 SCr440 carbon cold rolled steel coil.

Carbon Steel Chequered Plate - Qingdao Quanlong Metal ...

China Carbon Steel Chequered Plate catalog of A36 Hot Rolled Mild Steel Checkered Plate, Q235B Hr Ms Carbon Steel Checkered Plate provided by China manufacturer - Qingdao Quanlong Metal …

Carbon Steel Sheet Stock, Plates, Bars and Coils - Carbon ...

Carbon steel blanks, flats, bars, plates and sheet stock from Grainger come in a variety of widths, lengths and thicknesses for your industrial applications. Select low-steel and mild-steel rectangular or square carbon steel bars in hot-rolled and cold-rolled tempers that are readily brazed or welded, good for screw machining and that offer you ...

KK Steels International

M.S. Chequered Plate These plates are used to avoid slips and they even decorate the surface. These plates are economical to use in flooring and other structural of top and many more applications.

What Is Mild Steel? | Metal Supermarkets - Steel, Aluminum ...

Mild steel is a type of carbon steel with a low amount of carbon – it is actually also known as “low carbon steel.” Although ranges vary depending on the source, the amount of carbon typically found in mild steel is 0.05% to 0.25% by weight, whereas higher carbon steels are typically described as having a carbon content from 0.30% to 2.0%.[PDF]

STATE STEEL CATALOG

Rev. 7/03 State Steel Supply Company a full service supply center offering a wide range of services including: • In-Line Temper Mill (Cold Reduction Process) Cut to Length Coil Processing[PDF]

PRODUCT GUIDES - Central Steel and Wire Company: …

PRODUCT GUIDES THIS DOCUMENT IS UNCONTROLLED IF PRINTED. Form 1254 3/16/05 (Reprinted 5/27/15) ... A temper mill is a steel sheet and/or steel plate processing line composed of a horizontal pass cold rolling ... -Carbon and HSLA steel with specified minimum yield thru 80,000 psi.

MS Sheet - Mild Steel Sheets Latest Price, Manufacturers ...

The Mild Steel Sheets that we offer to our clients are manufactured using high quality materials. We always aim to provide high quality sheets & Plates at most competitive price, high on quality and durability. These sheets and plates are available in different dimensions and material to ensure wider choice to our clients.

Carbon Steel: Plates & Perforated Metal - Grainger ...

Carbon steel is one of the most commonly used materials in the manufacturing, industrial and construction fields, and Grainger has the all the components your business needs to get the job done. Shop for a carbon steel plate for your building and industrial projects, as well as perforated metal, in a number of gauges and design specifications ...

Mild Steel Sheet From Top Distributor And Supplier - Metal ...

Mild Steel Sheets. We can supply both Cold Reduced Sheets and Hot Rolled Sheets in various sizes to suit your commercial or domestic requirements. We have the largest range of mild steel sheets available in stock and ready for immediate dispatch, including galvanised, zintec and hot rolled pickled & oiled sheets.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.