Tel: +86-371-86151827

s275ml structural steel plate as per en 10025 4

Steel grade:s275ml structural steel plate as per en 10025 4

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s275ml structural steel plate as per en 10025 4 Introduction

s275ml structural steel plate as per EN 10025 4

S275ML,S275ML PLATE,S275ML STEEL - Mild steel plate ...Structural steel plate S275ML is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 …

EN 10025-4 S275ML,S275ML structural steel plate--Xin Steel ...

Structural steel plate S275ML is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 centigree.When rolling steel plate S275ML, the P and S contents can be 0.005% ...

S275ML,S275ML PLATE,S275ML STEEL - Mild steel plate ...

Structural steel plate S275ML is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 centigree.When rolling steel plate S275ML, the P and S contents can be 0.005% ...

EN 10025-4 S460M,S460M steel plate__Steel Supplier

Gangsteel is specialized in supplying EN10025-4 steel plate in S460M.For more information of S460M steel plates, please check them in following: Chemical composition % of the Product analysis of grade S460M (1.8827). Nominal thickness≤16(mm) CEV max = 0.45

en 10025 4 s355ml steel - w3s.in

EN 10025-4 S355ML,S355ML steel plate__Steel SupplierGangsteel is specialized in supplying EN10025-4 steel plate in S355ML.For more information of S355ML steel plates, please check them in following: Chemical composition % of the Product analysis of grade S355ML (1.8834). Nominal thickness form 16to 40(mm) CEV max = 0.39

S275ML steel plate,EN 10025-4 S275ML steel sheet - JOIN ...

EN 10025 S275ML steel material can be produced into S275ML steel sheet, S275ML steel pipe S275ML steel plate , S275ML flat bar. EN 10025 S275ML steel have the good weldable and fine grain structural property. So, it can be used into the steel structural or welded vessel or pressure vessels.

EN10025-4 S275ML Steel plate Supplier - Gangsteel

EN10025-4 S275ML Steel plate Supplier. Gangsteel supply EN10025-4 S275ML Steel plate with TMCP delivery situation.We sell EN 10025-4 S275ML Steel plate machined parts and cutting parts. Keywords: S275ML Steel plate, S275ML equivalent, S275ML Steel grade, S275ML Chemical composition, S275ML Mechanical properties

EN 10025-4 S355ML,S355ML steel plate__Steel Supplier

Gangsteel is specialized in supplying EN10025-4 steel plate in S355ML.For more information of S355ML steel plates, please check them in following: Chemical composition % of the Product analysis of grade S355ML (1.8834). Nominal thickness form 16to 40(mm) CEV max = 0.39

EN 10025 Standard Steel Plate - steelspecs

The foundation of each grade within the EN 10025 standard is the material’s tested yield strength measured in megapascals (1 MPa = .145 ksi). Each structural steel grade begins with an “S” and is followed by suffixes that represent variations in the specific requirement for that structural application.[PDF]

Structural Steel Plate and Strip to EN 10025

In addition, structural steel plate and strip to American, other European and Japanese specifications are available on enquiry. Refer to Table 4 for a list of the corresponding former national designations. Steel to EN 10025-2 is intended for structural work where no significant forming or bending must be done.[PDF]

European structural steel standard EN 10025 : 2004

2 European structural steel standard EN 10025 : 2004 Introduction EN 10025 : 2004 is the new European standard for structural steel. EN 10025 : 2004 is the new European standard for structural steel. This leaflet shows the new grades, properties and the nearest equivalent grades from former standards including EN 10025 : 1993. The grade[PDF]

Hot rolled products of structural steels

EN 10025-1:2004 (E) 4 Foreword This document (EN 10025-1:2004) has been prepared by Technical Committee ECISS/TC 10 “Structural steels - Grades and qualities”, the …

EN10025-4 S275ML Steel plate Supplier - Gangsteel

EN10025-4 S275ML Steel plate Supplier. Gangsteel supply EN10025-4 S275ML Steel plate with TMCP delivery situation.We sell EN 10025-4 S275ML Steel plate machined parts and cutting parts. Keywords: S275ML Steel plate, S275ML equivalent, S275ML Steel grade, S275ML Chemical composition, S275ML Mechanical properties

EN10025 4 S275ML supplier - pressure vessel steel plate …

s275ml structural steel plate as per EN 10025 4. supplier of EN S275ML steel HSLA steel,A36,Q235B,Q345B EN 10025-4-S275ML alloy steel,EN 10025-4-S275ML Non . EN 10025-4-S275ML is a kind of Non-alloyed structural steel plate, EN 10025-4 steel grade is for thermo mechanical rolled weldable fine grain structural steel in S275ML,S275ML .

EN 10025-4-S275ML alloy steel,EN 10025-4-S275ML Non ...

Key words : EN 10025-4-S275ML, S275ML Non-alloyed structural steel, S355ML structural steel plate, EN 10025-4-S275ML Non-alloyed structural steel plate EN 10025-4-S275ML is a kind of Non-alloyed structural steel plate, EN 10025-4 steel grade is for thermo mechanical rolled weldable fine grain structural steel in S275ML,S275ML steel plate and so on.

S275ML EN10025-4 S275ML steel - steelspecs

S275ML steel plate. S275ML Grade is a technical delivery conditions for thermo mechanical rolled weldable fine grain structural steels. S means the structural steel, M means the delivery condition. Capital letter L for the quality with specified minimum values of values of impact energy at temperature not lower than -50 degree.

EN 10025-2 S355J2 Steel Sheet/Plate Suppliers, Buy EN ...

steelplates.in› Low Alloy High Strength Steel› EN 10025-2Metline is a specialized supplier of EN 10025-2 S355J2 steel sheets and plates. We can offer EN 10025-2 S355J2 pressure vessel steel plates in a variety of thickness and sizes at reasonable prices. EN 10025-2 S355J2 is either available as ex–stock or directly shipped from the mill to our customers across the globe. EN 10025-2 is a structural ...

S355M,S355ML ,S420M, S420ML, S460M, S460ML, Steel plate ...

EN 10025-4 steel grade is for thermo mechanical rolled weldable fine grain structural steel in S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M and S460ML steel plate.

Sell S355M, S355ML, S420M, S420ML, S460M, S460ML, steel ...

EN 10025-4 steel grade specification is thermo mechanical rolled weldable fine grain structural steel in S275M, S275ML, S355M, S355ML, S420M, S420ML, S460M and S460ML steel plate.Steel.[PDF]

Structural Steel Plate and Strip to EN 10025

In addition, structural steel plate and strip to American, other European and Japanese specifications are available on enquiry. Refer to Table 4 for a list of the corresponding former national designations. Steel to EN 10025-2 is intended for structural work where no significant forming or bending must be done.

EN10025-4 S355ML Steel plate Supplier - Gangsteel

EN10025-4 S355ML Steel plate Supplier . Gangsteel supply EN10025-4 S355ML Steel plate with TMCP delivery situation.We sell EN 10025-4 S355ML Steel plate machined parts and cutting parts. Keywords: S355ML Steel plate, S355ML equivalent, S355ML Steel grade, S355ML Chemical composition, S355ML Mechanical properties

EN10025-4 - Mild steel plate,shipbuilding steel plate ...

Steel Standard:EN 10025-4 Rolling Type:Structural steel plate,low alloy steel plate Thickness:6mm-500mm Width:1500mm-4200mm more >> S275ML ... Steel Standard:EN 10025-4 Rolling Type:Structural steel plate,low alloy steel plate

EN10025-4 S460ML Offshore Steel Plates | S460ML steel ...

EN10025-4 S460ML Offshore Steel Plates manufacturers in india, EN10025-4 S460ML Offshore Steel Plates suppliers in india, EN10025-4 S460ML Offshore Steel Plates exporters in india, S460ML steel plate, EN 10025-4 S460ML, Steel plate S460ML, EN10113 S460ML steel plate, S460ML Plate, EN10025-4 S460ML TMCP Plates For Offshore Use, S460ML Structural Steel Plates Extensive …[PDF]

EN10025-4 | Steel Plate, Steel Bar, Steel Tubes Supplier

Part 4: Technical delivery conditions for thermomechanically rolled weldable fine grain structural steels EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade: S275M, S355M, S275ML, S355ML,

High Strength Low EN 10025 S355J2G3 Steel Plate Supplier ...

ISO Certified supplier and exporter of EN 10025 S355J2G3 Steel Plates, DIN 1.057 Hot Rolled High Tensile Plates, Buy EN 10025 Structural Plates in India. ... Buy EN 10025 Structural Plates in India. ... We are capable to perform these High Tensile EN 10025 S355J2G3 Coils as per customer’s different needs and demands.[PDF]

Hot rolled products of structural steels

EN 10025-2:2004 (E) 4 Foreword This document (EN 10025-2:2004) has been prepared by Technical Committee ECISS/TC 10 “Structural steels - Grades and qualities”, the secretariat of which is held by NEN. This European Standard shall be given the status of a …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.