Tel: +86-371-86151827

a299 grade b steel plate stock

Steel grade:a299 grade b steel plate stock

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a299 grade b steel plate stock Introduction

Steel Plate ASTM A299/A299M Grade B Grade A in Large …

Steel Plate ASTM A299/A299M Grade B Grade A in Large Stock for Sale from Top Supplier. Chemical and mechanical properties of ASTM A299 Grade B(A299GRB) Grade Chemical Composition(%) C Mn≥ Si P S ASTM A299 Grade B(A299GRB) 0.30 0.84-1.62 0.13-0.45 0.

A299 Grade Steel plate,A299 Grade Steel pipe - Steel ...

A299/A299M,and the equal steel grades SA299 Grade A and SA299 Grade B accoring to standard ASME SA299/SA299M.For steel plates of SA299 Grade A and SA299 Grade B produced from coils and furnished without heat treatment or with stress relieving only.

A299 Grade B SA299 Grade B A299GrB boiler pressure vessel ...

ASTM A299 Grade B boiler steel plate with minimum yield strength above 325 Mpa,and tensile strength within 550-690 Mpa.Comparing with pressure vessel steel plate A299 Grade A,yield strength above 290 Mpa and tensile strength within 515-655 Mpa,pressure vessel steel plate SA299 Grade B owned a higher values.Additional technical requirements for boiler steel plates SA299 Grade B such as ...

supplier of a299 steel plate,A36,Q235B,Q345B steel plate ...

A299 Chemical composition,A299 Mechanical properties …A299 Chemical composition,A299 Mechanical properties steel plate Leave a Message Get a price EX-Stock Promotion Center A 299 steel is an important grade under ASTM standard, one class of boiler and pressure vessels.

A299 GRADE A| A299 Gr.A|A299 GR A STEEL PLATE

A299 GRADE A| A299 Gr.A|A299 GR A STEEL PLATE 2013年7月22日 by admin. A299 GRADE A| A299 Gr.A|A299 GR A STEEL PLATE. A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B.. ASTM A299 plates in 50 mm and under in thickness are normally supplied in the as-rolled condition.

A299 Chemical composition,A299 Mechanical ... - steel plates

A 299 steel is an important grade under ASTM standard, one class of boiler and pressure vessels.Refer to A299 Chemical composition,A299 Mechanical properties, A299 is suggested that all the plates to be done ultrasonic test and PWHT for improving steel properity and safety when using in high pressure situiations in yard.

ASTM A299 GRADE B| A299 Gr.B STEEL PLATE_Henan Gang …

A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B. ASTM A299 plates in 50 mm and under in thickness are normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both.

ASTM A299 Grade B(A299GRB) Pressure Vessel And Boiler ...

Any request for ASTM A299 Grade B(A299GRB) Pressure Vessel And Boiler Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

Products / Boiler Steel Plate / ASTM A299 Steel Plate ...

ASTM A299 is manganese-silicon carbon steel plates for use in welded boilers and other pressure vessels. The grade is A299 Grade A and A299 Grade B

SA299 Grade A SA299 Grade B A299 Grade A/B steel plate ...

Carbon steel with Manganese-Silicon plate SA299 Grade A,SA299 Grade B under steel specification standard ASME SA 299/SA 299M.There are other two steel grades A299 Grade A and A299 Grade B owned the similar steel properity which is according to ASTM A 299/A 299M.As for the heat treatment, steel plate A299 Grade A and A299 Grade B equal and under 50 millimeter are normally rolled in the …

Products / Boiler Steel Plate / ASTM A299 Steel Plate ...

ASTM A299 is manganese-silicon carbon steel plates for use in welded boilers and other pressure vessels. The grade is A299 Grade A and A299 Grade B

A299 steel in Israel - steel grade steel material

A299 steel in Israel, steel,Hot sell A299 steel in Israel, steel grade steel material stock in China,China A299 steel in Israel, steel grade steel material factory. Keeps more than 10,000 tons hot rolled and cold rolled A299 steel in Israel, steel grade steel material in stock each month. We can meet our customer's any quantity request.

A299 Grade B dealer - Mild Cold Rolled steel plate

A299 Grade B dealer, steel,Hot sell A299 Grade B dealer, Mild Cold Rolled steel plate stock in China,China A299 Grade B dealer, Mild Cold Rolled steel plate factory. Keeps more than 10,000 tons hot rolled and cold rolled A299 Grade B dealer, Mild Cold Rolled steel plate in stock each month. We can meet our customer's any quantity request.

A299 Grade B SA299 Grade B A299GrB boiler pressure …

ASTM A299 Grade B boiler steel plate with minimum yield strength above 325 Mpa,and tensile strength within 550-690 Mpa.Comparing with pressure vessel steel plate A299 Grade A,yield strength above 290 Mpa and tensile strength within 515-655 Mpa,pressure vessel steel plate SA299 Grade B owned a higher values.Additional technical requirements for boiler steel plates SA299 Grade B such as ...

ASTM A299 Grade B(A299GRB) Pressure Vessel And Boiler ...

Any request for ASTM A299 Grade B(A299GRB) Pressure Vessel And Boiler Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

ASTM A299 GRADE B| A299 Gr.B STEEL PLATE_Henan Gang …

A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B. ASTM A299 plates in 50 mm and under in thickness are normally supplied in the as-rolled condition. Plates may be ordered normalized or stress relieved, or both.

Supply A299 GRA, A299 GrB alloy steel plate for boiler and ...

Supply A299 GRA, A299 GrB alloy steel plate for boiler and pressure vessel 2013年8月16日 by admin. A299 /A299M covers manganese, silicon carbon steel plate for used in welded boiler and others pressure vessels in steel grade A299 Grade A and A299 Grade B.. 1.

ASTM A299 Grade A/B High Quality Carbon Steel Plate ...

ASTM A299 specification covers manganese-silicon carbon steel plates for use in welded boilers and other pressure vessels. Plates under this specification are produced in two grades (A, B). Yield and tensile strength of Gr. B is higher than Gr. A.

offer A299 Gr.B steel grade dealer-BBN STEEL Pressure ...

buy steel plate - consteelconstruction. astm 204 gr b din manufacturer steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. astm 204 gr b din manufacturer can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel. A204 Gr.A Gr.B steel sheet - ship steel,boiler steel

ASTM A299/ A299M Grade B Pressure Vessel Steel Plate

ASTM A299/ A299M Grade B Pressure Vessel Steel Plate TJC Steel can supply A299 Grade B/ A299 GrB pressure vessel steel plate, mainly used in construction for …[PDF]

ASTM A299-A299M | Steel Plate, Steel Bar, Steel Tubes …

ASTM A299/A299M specification for Pressure Vessel plates, carbon steel, manganese-silicon. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Tension test shall be made to conform to the requirements specified.ASTM A299/A299M standard main steel grade:ASTM A299/A299M Grade A,B(A299GRA,B). Standard:ASTM ...

BBN Steel Supply a299 grade a plate chemical composition ...

A 299 steel is an important grade under ASTM standard, one class of boiler and pressure vessels. Refer to A299 Chemical composition,A299 Mechanical properties, A299 is suggested that all the plates to be done ultrasonic test and PWHT for improving steel properity and safety when using in high pressure situiations in yard. A299 chemical composition :

offer ASTM A299 grade dealer-BBN STEEL Pressure Vessel …

BBN Steel mainly provide RMRS grade FQ51 shipbuilding steel plate distributor, ABS grade A,B,D,E,AH32,AH36,DH36,ASTM A131 grade A,B,D,E,AH32,AH36,DH36,EH36,CCS AH36 ... RMRS grade DQ63 marine steel plate stock - partnersteels. Grade A A299 Grade B A302 Grade A A302 Grade B A302 Grade C A302 Grade D Type of Steel Carbon Carbon ...Steel Plate.

ASTM A299/ASME SA299 Steel Plate for Sale

ASTM A299/A299M specification for Pressure Vessel plates, carbon steel, manganese-silicon. The steel shall be killed and shall conform to the fine austenitic grain size requirement. Tension test shall be made to conform to the requirements specified.ASTM A299/A299M standard main steel grade:ASTM A299/A299M Grade A,B(A299GRA,B).

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.