Tel: +86-371-86151827

a514 grade a steel plate stock

Steel grade:a514 grade a steel plate stock

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a514 grade a steel plate stock Introduction

MetalsDepot® - A514 Plate | T1 Steel Plate - Buy Online!

A514 Steel Plate aka T1 steel plate is a high strength steel plate designed for applications requiring optimal impact and abrasive resistance. A514 T1 steel plate provides a high yield strength of 100 ksi min. with good weldability and toughness. Designed for a wide range of structural uses, as well as for machinery and equipment, A514 T1 Steel Plate offers optimum in strength, toughness ...

27463 | A514 | A514 | ALLOY | Metals | Castle Metals Site

To achieve different degrees of strength, A514 alloy plate is quenched and tempered in oil or water. Certain chemical additions improve hardenability, strength, and toughness. Grades H, F, and Q of Alloy A514 steel plate have increased alloying elements that allow for high strength in heavier thickness.

ASTM A514 Alloy & Abrasion Resistant Steel Plate | Chapel ...

A quenched & tempered, high-strength, weldable steel plate utilized in structural applications. Because of this material’s high yield strength it is ideal for projects requiring a light weight steel without sacrificing durability or toughness.

ASTM A514 Steel Plate - Grade B, E, F, H, Q, S | Leeco ...

leecosteel› …› Alloy Quenched & Tempered (Q&T) Steel PlateFor over 130 years, Leeco Steel has distributed ASTM A514 plate steel that is most commonly used as a structural steel in building construction, for cranes or other large machines supporting heavy loads. ASTM A514 steel plate has a strength of 100 ksi/690 MPa. We offer A514 heavy steel plates various thicknesses, lengths, and widths to meet your specifications.

ASTM A514 Plate - Quenched & Tempered A514 Plate …

universalsteelamerica› …› ASTM Structural PlatesA514 is a high strength low alloy (HSLA) material grade used in structural applications requiring superior strength. A514 has a minimum yield strength of 100ksi up to 2.5” thick, and a 90ksi minimum yield strength from 2.5” to 8” thick. Standard stock grades are B, H, F, Q, S, & E, with alternative grades available upon request.

A514 | ALLOY | In Stock | Castle Metals Site

To achieve different degrees of strength, A514 alloy plate is quenched and tempered in oil or water. Certain chemical additions improve hardenability, strength, and toughness. Grades H, F, and Q of Alloy A514 steel plate have increased alloying elements that allow for high strength in heavier thickness.

ASTM A514 T1 Steel Plate | Buy Online | Cut to Size | No ...

Home » ASTM A514 T1 Steel Plate. ASTM A514 T1 Steel Plate Help Print View Larger. Select Your Size: Stock Size: Select your size above to see available stock sizes. ... A.K.A: Flat stock. ASTM: ASTM A514 (Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Abrasion Resistent, Suitable for Welding)

ASTM Structural Plate Supplier - Alloy Steel Plates ...

universalsteelamerica› Steel Plate ProductsUniversal Steel provides ASTM quality steel plates for a multitude of applications in structural fabrication, construction, machinery, and other general uses of high strength low alloy (HSLA) steel plate. Standard stock in structural grade steel includes A36, A572, A709, A633, A588, and A514.

Plate Grades - Steel Plate Akron - Steel Plate Atlanta

Plate Grades Steel Plate Akron / Atlanta offers various steel stock for all applications. We are always getting in more materials to make sure to accommodate any job that can come through.

ASTM A514 Grade A low alloy steel plate stock - cast-steel…

ASTM A514 Grade A low alloy steel plate stock Advantage: We promise we can offer you the qualified ASTM A514 Grade A low alloy steel plate stock at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many ASTM A514 Grade A low alloy steel plate stock stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you be ...

A514 Grade B Steel Plates - steelspecs

S355J2,S35J2G3,S355JR,S235JR Stock Steel Plate. ... A514 Grade B Steel Plates 2015年12月4日 by admin. A514 Grade B Steel Plates . 1. A514 plate steel has a min-yield strength of 100 ksi/690 MPa. It’s most commonly used as a structural steel in building construction, for cranes, or other large machines supporting high loads. ...

ASTM Structural Plate Supplier - Alloy Steel Plates ...

universalsteelamerica› Steel Plate ProductsUniversal Steel provides ASTM quality steel plates for a multitude of applications in structural fabrication, construction, machinery, and other general uses of high strength low alloy (HSLA) steel plate. Standard stock in structural grade steel includes A36, A572, A709, A633, A588, and A514.

A514 - BEBON steel - A514 steel plate

Bebon International is a professional A514 steel exporter and a steel Stockist in china. We keep more than 1000 tons A514 steel in stock every month. If you want to get the A514 steel price, please do not hesitate to contact us. Any need in A514 Chemical Composition and Mechanical Properties, please feel free to contact us by email or calling ...

Alloy Plate - Ryerson

Home // Stock List // Alloy Plate. Alloy Plate Ryerson offers a variety of grades of alloy plate, including AR400, which is used in wear applications, and A514, which has excellent mechanical properties. We also carry 4140, a cold-drawn annealed steel with excellent hardening capabilities that responds well to heat treatment and is easy to ...

high yeild steel plate | a514 steel plate-Triton Alloys Inc

A514 is a conventional quenched and tempered alloy steel plate designed for structural applications. A514 steel is available in a variety of chemistries: A, B, C, E, F, H, J, K, M, P, Q, S, and T. All of these grades have the same mechanical properties. A 514 steel plate Grade and Specification

A514 Steel Plate - ASTM514 Abrasion Resistant Steel ...

A514 is a conventional quenched and tempered alloy steel plate designed for structural applications. A514 steel is available in a variety of chemistries: A, B, C, E, F, H, J, K, M, P, Q, S, and T. All of these grades have the same mechanical properties.

Plate - Kloeckner Metals Corporation

Kloeckner is one of the only steel distributors in North America to stock higher-grade plate products, including armor, PVQ, and tempered plates. With a diverse product line that spans the complete plate group, we pride ourselves on the unparalleled breadth of our inventory.

Inventory — Ohio Steel Sheet & Plate

Inventory. Ohio Steel Sheet and Plate carries over 50,000-ton of domestic and foreign prime steel plate in multiple grades and sizes. The following is a short list of our most popular grades and sizes we keep on the floor for just in time deliveries.[PDF]

Plate - ArcelorMittal

Available Grades ArcelorMittal USA Plate facilities produce seven grades of steel in the ASTM A514 (structural applications) and ASTM A517 (pressure vessel applications) families. These are grades A, B, E, F, H, P and Q. They are chemically identical between A514 and A517 and also similar to the four “T-1” grades as follows: Typical ...

ASTM-A514 - SSAB high-strength steel - sheet, plate, coil ...

Grades: A514 GR B, A514 GR H, A514 GR E, A514 GR F, A514 GR Q, A514 GR S. ASTM A514. The ASTM A514 specification is the Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding used in applications where Yield Strengths of ≥ 100 ksi are required for plates up to 2-1/2" thick, inclusive.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

100XF Temper Leveled Plate Stock Lengths: 24 foot 100XF Temper Leveled Plate 100XF steel plate has been developed for applications where increased strength-to-weight ratios are required. It has physical properties similar to those of ASTM A514 even though its manufacturing process does not require heat treatment.

Steel Plate Products - Alloy & Carbon Steel Plates ...

Steel plate specifications include, but are not limited to pressure vessel quality (PVQ), chrome-moly, API, ABS, AISI & ASTM from 3/16” up to 12” thick. Specialty requests are welcome outside of the standards listed, as Universal can supply mill direct solutions from sources around the world. Standard Stock Material Specifications: A/SA 36 ...[PDF]

ARE YOU P SPECIFYING M - American Institute of Steel ...

or 65, ASTM A529 grade 42 or 50, ASTM A514 grade 90 or 100, or ASTM A852. Structural plates with atmospher-ic corrosion resistance (weathering) characteristics can be obtained by speci-fying ASTM A588 grade 42, 46, or 50. However, the availability and cost effec-Modern Steel Construction / February 1999 tiveness of structural plates in grades

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.