Tel: +86-371-86151827

s355 steel data sheet pdf

Steel grade:s355 steel data sheet pdf

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s355 steel data sheet pdf Introduction

[PDF]

Ympress® S355MC Strong, consistent and highly formable

Ympress® S355MC Strong, consistent and highly formable Ympress® S355MC is a hot-rolled, high-strength low-alloy steel. It combines high strength with outstanding formability and consistent quality. It replaces conventional construction steel for applications where high strength is paramount. It is ideal for load-bearing and[PDF]

S355 European Standard Steel - joostdevree.nl

S355 European Standard Steel S355 EN 10025 : 2004 Standard Structural Steel Plate S355 structural steel plate is a high-strength low-alloy European standard structural steel covering four of the six "Parts" within the EN 10025 – 2004 standard. With minimum yield of …[PDF]

Datasheet for Steel Grades Carbon Steel S355

This page is mainly introduced the S355 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S355,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

S355 Datasheet, PDF - Alldatasheet

S355 Datasheet, S355 PDF, S355 Data sheet, S355 manual, S355 pdf, S355, datenblatt, Electronics S355, alldatasheet, free, datasheet, Datasheets, data sheet, datas ...[PDF]

S355 S355J2 S355J2+N Steel - West Yorkshire Steel

S355 S355J2 S355J2+N Steel S355, S355J2, S355JR, S355J2+N steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions. The S355 steel[PDF]

Datasheet for Steel Grades Carbon Steel S355JR

Steel GradeS355JR Chemical information,Mechanical properties Physical properties, Mechanical properties, Heat treatment, and Micro structure ... sheet,plates, steel coils, steel pipes,forged and other materials application. Datasheet for Steel Grades Carbon Steel S355JR S355JR Standard Number:

standard.no

We would like to show you a description here but the site won’t allow us.[PDF]

Structural Steel Plate and Strip to EN 10025

Care has been taken to ensure that the information in this data sheet is accurate. Mittal Steel South Africa Limited does not, however, assume responsibility for any inaccuracies or misinterpretations of this data. We are continuously engaged in product development and revised data sheets …

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...[PDF]

Carbon Steel Comparison Tabel - Norsk Stål

1.8818 s275m ste 275 tm fe e 275 kgtm 1.8819 s275ml tste 275 tm fe e 275 kttm 1.8823 s355m ste 355 tm e 355 r fe e 355 kgtm a 572 gr. c 1.8834 s355ml tste 355 tm e 355 fp fe e 355 kttm 50 ee a 633 gr. c[PDF]

ThyssenKrupp Materials International - Stahlkontor Hahn

ThyssenKrupp Materials International Pare 2 Material data sheet hollow sections acc. to DIN EN 10210-1:2006 09/2011 Mechanical properties at room temperature Steel grade YieldstrengthR eH N/mm² TensilestrengthR m N/mm² ElongationA 1"2" min.in% ImpactenergyKV 3" J min. Nominalwallthicknessinmm Nominalwall thicknessinmm

S355 Datasheet, PDF - Alldatasheet

S355 Datasheet, S355 PDF, S355 Data sheet, S355 manual, S355 pdf, S355, datenblatt, Electronics S355, alldatasheet, free, datasheet, Datasheets, data sheet, datas ...[PDF]

Engineering Bar Product Manual - Tata Steel Europe

Standards Institute (BSI) as BS EN 10025 S355, S355J2 and S355J2+N. These standards superseded the BS4360 grades. The average minimum yield for this material is 355 N/mm², hence the name S355 A medium tensile, low carbon manganese steel which is readily weldable and possess good impact resistance. Machinability is similar to that of mild steel.[PDF]

Stock Specifications - Sections - ArcelorMittal

Within EN 10225 this steel is designated as a group 2 steel which means that this grade is substantially modified from EN 10025-4. This steel offers enhanced through thickness ductility and impact values verified at -40°C. This grade is also known as 1.8806+M. Chemical composition Product analysis in % (All values are max. unless otherwise ...

s355j2 n datasheet - hopkinsplasticsurgery

S355 S355J2 S355J2+N Steel - UK SupplierDownload Full Datasheet. S355 S355J2 S355J2+N Steel. S355, S355J2, S355JR, S355J2+N steel stockholders and suppliers, delivering to the whole of the UK. West Yorkshire Steel are suppliers of S355 grades in steel plate, round bar and flat bar. As an unalloyed low carbon steel grade S355 is supplied in the hot rolled and cold drawn conditions.[PDF]

CONTINENTAL STEEL PRODUCTS HANDBOOK

Purlins, Mild Steel Plates, Chequered Plates, API 5L (1991) and ASTM A53 (1997) pipes, Steel Sheet Piles to EN 10248:1996 and Other Steel Sheet Piles. Figure 1 - Effect of cold working on material properties for cold formed hollow sections 24 Figure 2 - Comparison of corner radius of hot finished and cold formed hollow sections 24

s275 steel properties pdf physical properties

Material Properties of S355 Steel - An Overview. Material Properties of S355 Steel - An Overview S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weldability and machinability, let us see more mechanical details of this steel.[PDF][PDF]

DATASHEET: 11-02-03 GB8413 DOMEX Domex 355 MC …

the demands for steel S355 MC in EN-10149-2. APPLICATION ... Nominal sheet thickness, t <3 mm 3 mm 6 mm Min. recommended bending radius (<90 º) ... cold forming steel Page 2/2 The particulars in this data sheet are correct at the time of going to print and are intended to give general guidance for the use of the product. Subject to ...[PDF]

Steel General Product Range - thyssenkrupp

ing high-performance, ultra-hard special steel grades. Our wear-resistant XAR ® steels are available in a range of grades and sheet thicknesses and offer innovative solutions e.g. in mining applications or in steel and cement plants. In addition to non-alloy and alloy steels, our product range includes X-COR ®-brand sour gas-resistant ...

s355mc data sheet - w3s.in

[PDF] Cold Rolled Steel Sheet for Drawing and Forming EN … Care has been taken to ensure that the information in this data sheet is accurate. ArcelorMittal South Africa Limited does not, however, ... EN 10130 DC01 0,12 0,60 0,045 0,045 0,030 0,020 Data sheet: B3.1 Cold Rolled Steel Sheet for Drawing and Forming EN 10130 DC01 – DC06 . Learn more

s275 steel properties pdf steel plate

TruZinc Steel Grade 33 Grade Data Sheet - Steelscape. TruZinc® Steel Grade 33 Grade Data Sheet ... Mechanical Properties Chemical Composition Steel base Guaranteed Minimum Typical Maximum Percent by Weight[PDF] Steel grades according to American standards - A36, … Mechanical properties A36 - 04b A36 ≥250 [36] 400-550 [58-80] 20 21 ...[PDF]

Carbon Steel Comparison Tabel - Norsk Stål

1.8818 s275m ste 275 tm fe e 275 kgtm 1.8819 s275ml tste 275 tm fe e 275 kttm 1.8823 s355m ste 355 tm e 355 r fe e 355 kgtm a 572 gr. c 1.8834 s355ml tste 355 tm e 355 fp fe e 355 kttm 50 ee a 633 gr. c[PDF]

Stainless Steel Grade Datasheets

Grade Data Sheet 301 301L 301LN Revised May 2008 Page 1 of 2 atlassteels.au Grade 301 is a high work-hardening rate austenitic stainless steel. It can be supplied with a …

S355JR - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S355JR can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

s355j2 datasheet - onlineshoppingsitesinindia.co.in

Material Properties of S355 Steel - An Overview S355 is a non-alloy European standard (EN 10025-2) structural steel, most commonly used after S235 where more strength is needed. It got great weldability and machinability, let us see more mechanical details of this steel.[PDF] S355 S355J2 S355J2+N Steel - West Yorkshire Steel

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.