Tel: +86-371-86151827

duplex stainless steel plate duplex stainless steel shee

Steel grade:duplex stainless steel plate duplex stainless steel shee

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

duplex stainless steel plate duplex stainless steel shee Introduction

Duplex Stainless Steel - Plate, Sheet, Bar, Tubular ...

Duplex Grades. Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Duplex stainless steel plate contains relatively high levels of chromium (between 18% and 28%) and low to moderate amounts of nickel (between 1.5% and 8%).Duplex 2205 Specifications · 400 Series Stainless · Stainless Steel Bar · Stainless Steel Sheet

2101 Duplex Stainless Steel Plate & Sheet | Specialty ...

2101 Duplex Stainless Steel Plate and Sheet with a non-bright finish that offers excellent corrosion resistance. Call or email us for a free quote.

Duplex/Super Duplex Stainless Steel Plate Products ...

Duplex stainless steel plate contains relatively high levels of chromium (between 18% and 28%) and low to moderate amounts of nickel (between 1.5% and 8%). The high corrosion resistance and excellent mechanical properties of duplex stainless steels can be attributed to their chemical composition and balanced (duplex) microstructure of ...

2205 Duplex Stainless Steel Plate - UNS S32205

2205 is a duplex stainless steel, with a chemical composition of nearly equal proportions of austenite and ferrite. This combination allows the alloy to be stronger and tougher than standard austenitic steels. Duplex stainless steels like 2205 also maintain good weldability in their thickest sections, and they are much more resistant to stress corrosion cracking than standard austenitic steels.

Stainlessinox - Official Site

Stainlessinox International is one of Dubai / UAE’s most prominent Stockholders & Exporters of Stainless Steel Sheet, SS Sheets, Stainless Steel Plates, SS Coils, Stainless Steel Flats, SS Pipes, Duplex Steel Sheets, Super Duplex Steel Coils Expoter

Alloy 2205 Duplex Stainless Steel Plate - Sandmeyer Steel

Alloy 2205 duplex stainless steel plate is readily sheared and cold formed on equipment suited to working stainless steels. However, because of the high strength and rapid work hardening of 2205 duplex stainless steel plate, forces substantially higher than those for austenitic steels are required to …

Duplex Stainless Steel Sheet / Plates / Coils uns no ...

We are having wide range of sizes in our stock of 2205 Duplex Stainless Steel& 2507 Super Duplex Stainless Steel Plates & Sheets. Since 2008, there has been a major demand for Stainless Steel - Duplex - 1.4462 Sheet and Platedue to its excellent corrosion resistance quality. It resists inter-granular and crevice corrosion.

Price per kg for Stainless Steel - Duplex Stainless Steel ...

Wholesale Supplier of Price per kg for Stainless Steel - Duplex Stainless Steel Sheet, 316 Stainless Steel Plate offered by Ragavendra Engineering, Chennai, Tamil Nadu.

2205 Stainless Steel Sheet, Round Bar, Pipes, Tubes and ...

2205 Stainless Steel Sheet, 2205 Stainless Steel Round Bar, 2205 SS Pipe Tube & Fittings. Common Trade names 2205 Stainless, 2205 Stainless Steel. Features. Corrosion Resistance: 2205 stainless stands-up excellently in a range of atmospheric environments even when exposed to corrosive elements, specifically to sea water.[PDF]

Stainless Steel Grade Datasheets

Duplex Stainless Steels 2101 Lean duplex – economical alternative to 304 and 316 ... Grade Data Sheet 301 301L 301LN Revised May 2008 Page 1 of 2 ... The properties for Grade 301 are specified for flat rolled product (plate, sheet and coil) in ASTM A666. Similar but not identical mechanical properties are specified in EN 10088.2 and JIS G4305

Stainless Steel Bars, Plates, & Sheets | Specialty Steel Co.

Stainless Steel including 316, 316L and duplex plates and sheets in a variety of sizes and hardnesses. Call or email us for a free quote.

Duplex Stainless Steel - Brown McFarlane

Duplex Stainless Steel Plate. Brown McFarlane holds a comprehensive stock of Duplex stainless steel plate in material grades S31803, S32205, and 1.4462 manufactured by Western European steel makers and third party certified to EN 10204 3.2. All plates in stock are also certified in accordance with NORSOK MDS D45.

Duplex S32205 Plate | S32205 Duplex Steel Sheet | S32205 ...

Cut to size S32205 Duplex Steel Plate, supplier & stockist of Duplex S32205 Plate #4 Finish, Duplex S32205 Sheet #8 Mirror Finish, S32205 Duplex Steel Coil 2B Finish (HRAP), S32205 Duplex Steel Diamond Plate, S32205 Duplex Steel Tread Plate price in India, ISO certified S32205 Duplex Steel Plate …

Stainless Steel Bars, Plates, & Sheets | Specialty Steel Co.

Duplex stainless steel is a fairly new grade of stainless to metals distributors. Duplex means equal parts Austenite and Ferrite. This particular grade known as (2101 Duplex) is a hybrid that offers excellent corrosion resistance and superior resistance to pitting and stress corrosion cracking (SCC) over Type 304 and 316 stainless steels.

Duplex stainless steel plate grade S31803 / S32205

Although 2205 has good high temperature oxidation resistance, this grade - like other duplex stainless steels - suffers from embrittlement if held for even short times at temperatures above 300ºC. If embrittled, this can only be rectified by a full solution annealing treatment. Duplex stainless steels are almost never used above 300ºC.

Duplex Stainless Steels | Stainless Steel Types

Duplex Stainless Steel Grades. Duplex stainless steels contain a mixture of austenite and ferrite in their structure, and exhibit characteristics of both phases with higher strength and ductility. Nitrogen is added to the second generation duplex alloys and provides strength and improved weldability.

A240 2205 Duplex Steel Plate Suppliers, Duplex Steel Sheet

2205 Duplex Steel Plate Suppliers, Duplex Steel Sheet, Duplex Steel A240 Sheet, Duplex Steel Plate Sizes, S31803 Duplex Steel Sheet, We hold stock of Duplex stainless steel Sheet …

Duplex Stainless Steel Bar | Rod | Pipe & Tube | Sheet & Plate

Duplex Stainless Steel Bar, Rod , Pipe & Tube , Sheet & Plate Duplex Stainless Steel Bar , Rod , Pipe & Tube , Sheet & Plate Manufacturer, Stockholder, Suppliers and Exporter Duplex Stainless Steels , also referred to as austenitic-ferritic stainless steels, are a family of grades with about equal proportions of ferrite and austenite.[PDF]

Stainless Steel Grade Datasheets

Duplex Stainless Steels 2101 Lean duplex – economical alternative to 304 and 316 ... Grade Data Sheet 301 301L 301LN Revised May 2008 Page 1 of 2 ... The properties for Grade 301 are specified for flat rolled product (plate, sheet and coil) in ASTM A666. Similar but not identical mechanical properties are specified in EN 10088.2 and JIS G4305

duplex steel astm grades products,duplex stainless steel ...

duplex stainless steel equivalent, super duplex stainless steel equivalent, 1.4462 duplex stainless steel equivalent, duplex 2205 stainless steel equivalent, duplex ...

Price per kg for Stainless Steel - Duplex Stainless Steel ...

316 / 316L Stainless Steel Plate 316 / 316L stainless steel plates are part of the austenitic family of stainless steel and is the most widely used varieties of stainless plate. 316 grades contain a higher level of Nickel than 304 giving it an improved corrosion resistance over 304 grades. 316/316L plate is a good option for marine applications ...[PDF]

Atlas Grade datasheet 2205 rev May 2008 July 2010.

Grade Data Sheet 2205 Revised May 2008 Page 1 of 2 atlassteels.au 2205 is the most widely used duplex (ferritic/austenitic) stainless steel grade. It finds applications due to both excellent corrosion resistance and high strength. The original S31803 composition has over the years been refined by many steel …[PDF]

UNS S32906 Duplex Stainless Steel Plate

TJC STAINLESS is the most competitive manufacture and supplier of UNS S32906 duplex stainless steel in thickness 0.3mm-80mm and width up to 2200mm.Other special requests about specification,please contact us. Attachment: Mill Certificate Sample for UNS S3 2906 Duplex Stainless Plate/Sheet/Coil . Keyword:S32906,DUPLEX STAINLESS STEEL,PLATE,SHEET ...

Duplex Stainless Steel - 6 Moly Super Duplex API 5LX ...

Duplex UNS S31803 UNS S32205 Duplex Stainless Steel | Supplier Super Duplex 6 Moly Copper Nickel Titanium and other exotic alloys Supplier of Duplex Stainless Steel UNS S31803 Duplex UNS S32205 Duplex Tubing, Duplex Pipe Fittings Duplex Round Bar Duplex Valves Duplex Flanges Duplex Plate Duplex Sheet

Alloy 20 | Sheet, Plate & Coil | Duplex Stainless Steel ...

Duplex Stainless 2205 is a nitrogen-enhanced duplex used in applications requiring high strength and excellent corrosion resistance. It is designed to combine improved resistance to stress corrosion cracking, pitting and crevice corrosion. Duplex 2205 provides nearly double the corrosion resistance typical in other austenitic stainless steels.

Duplex 2205 Stainless Steel - Penn Stainless Products

General Properties. Duplex 2205 is a two-phase, ferritic, austenitic 22% chromium, 3% molybdenum, 5 to 6% nickel alloyed stainless steel. It is the most widely used duplex stainless steel grade and is characterized by high yield strength, double that of the standard austenitic stainless steel grades.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.