Tel: +86-371-86151827

steel plate ss41 d checker steel

Steel grade:steel plate ss41 d checker steel

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel plate ss41 d checker steel Introduction

[PDF]

Steel plate Material comparision - ahlsteel

Steel plate Material comparision GB JIS ASTM Q235-F SS41 G3101 A36 USt37-2 1.0112 DIN17100 Q235 SS41 G3101 A283-C RSt37-2 1.0114 DIN17100 Q255A SS50 G3101 A283-D (RSt42-2) 1.0134 DIN17100 (A3R) SPV24 G3115 A285-C 20g SB42 G3103 A515.Cr60 HⅡ 1.0425 DIN17155 (15g) SB35 G3103 A515.Cr55 HⅠ 1.0345 DIN17155

SS41 - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SS41 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Gl Ship Steel Plate ! A / B / D / E Checker Steel - Buy ...

Gl Ship Steel Plate ! A / B / D / E Checker Steel , Find Complete Details about Gl Ship Steel Plate ! A / B / D / E Checker Steel,Grade D Shipbuilding Steel Plate,Astm A106 Grade B Steel Plate,Mild Steel Plate Ss41 from Steel Sheets Supplier or Manufacturer-Guangzhou Long Sheng Hing Trading Co., Ltd.[PDF]

Datasheet for Steel Grades Carbon Steel SS41

This page is mainly introduced the SS41 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of SS41,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

supplier of ss41 plate application,A36,Q235B,Q345B steel ...

JIS G3101 SS41 steel plate - BBN Steel. SS41 steel is the old grade under SS400 JIS G3101. JIS G3101 SS41 steel plate is carbon structural steel which equivalent to the grade Q235B under GB/T700-1988 in China.SS41 steel plate's toughness and plasticity is good, has certain elongation, has the good welding performance and …

stainless steel plate - tm-steel

stainless steel sheet stainless steel plate stainless steel coil/strip stainless steel pipe BA series No.4 / HL / Mirror/Checkered plate series Case CaseA News Company News Industry News About Us About Us Culture Contact Us Contact Us Online Message

G3101 SS41 steel plate, Grade SS41, SS41 steel - BEBON STEEL

G3101 SS41 steel is a kind of material for boiler and pressure vessel steel.So, G3101 SS41 steel is used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. About G3101 SS41 steel, we can offer SS41 steel plate specifications according to your requirements.

supplier of wikipedia ss41 steel,A36,Q235B,Q345B steel ...

SS41 A42 Mild Steel Plate Cutting Machine - pond-pro. Steel plate Material comparision GB JIS ASTM Q235-F SS41 G3101 A36 USt37-2 1.0112 DIN17100 Q235 SS41 G3101 A283-C RSt37-2 1.0114 DIN17100 SAE steel grades - Wikipedia SAE International, as a standards organization, maintains several alloy numbering systems, one of which, for steel grades, is the SAE steel grades system.

JIS G3101 SS400 Structural Carbon Steel Plate Specification

JIS G3101 SS400 is one of the most common carbon structural steel grade, other grades of JIS G3101 are ss330, ss490, ss540. Related product type includes steel plate, steel sheet, steel sections, steel …

SS400 steel plate - BEBON INTERNATIONAL

SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.When customers order SS400 steel plate from us,our mill should be roll them completely according to …

Checkered Steel Floor Plate | Hansen Steel | ECW Base Cart

Checkered and diamond plate in the California area is available from Hansen Steel for all of your steel floor plate applications. -

SS41 MILD STEEL PLATE singapore - pressure-vessel-steel

mechanical properties ss41 SS41 - Steel Grade. ... steel plate size hot rolled steel sheet mild steel chequered plate galvanized checker plate ... mild steel plate ss41 for sale, mild steel plate ss41 … Quality mild steel plate ss41 products list - mild steel plate ss41 Provided by Manufacturers & Wholesalers from China.

stainless steel plate - tm-steel

stainless steel sheet stainless steel plate stainless steel coil/strip stainless steel pipe BA series No.4 / HL / Mirror/Checkered plate series Case CaseA News Company News Industry News About Us About Us Culture Contact Us Contact Us Online Message

ss41P steel - w3s.in

SS41 - steel-gradesStainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SS41 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Checkered Steel Floor Plate | Hansen Steel | ECW Base Cart

Checkered and diamond plate in the California area is available from Hansen Steel for all of your steel floor plate applications. -

SS41 mild steel sheet SS41 mild steel plate - w3s.in

BBN steel is world class raw iron and steel materials supplier, 6mm ss400 ss41 mild ms corten steel plate,the main steel materials we supply are mild steel, low alloy steel, alloy steel, vessel steel, corten steel and weatherproof steel, pipeline steel, gas cylinder steel, shipbuilding steel, stainless steel., etc.

BEBON steel - S45C steel plate

S 45 C steel plate, JISG4051 S 45 C steel plate, under JISG4051 standard, we can regard S 45 C steel plate as high carbon steel. S 45 C steel plate is one mainly of high carbon steel,JIS G 4051 S45C is suitable for shafts studs, keys etc. Available as rolled or normalised. Supplied as square bar, or …

SS41 MILD STEEL PLATE - hotelsaintmerryparis

name of ss400 factory steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. name of ss400 factory can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel. steel plate ss41 galvanized checker steel plate for ship ...

JIS SS41 carbon Steel Plate - zshj.en.alibaba

S hip plate. Boiler steel plate. Corrosion resistant steel plate. Low alloy high strength steel plate. Alloy structural steel plate. Steel plate for bridge building. Structural steel plate for building. bridge and pavment,antiskid board

Comparison of ASTM A36 and SS400 steel--Xin Steel ...

Steel grades ASTM A36 and SS400 under JIS G3101 both are common used carbon structure steels,mild steels.When rolling steel plates ASTM Grade A36,As rolled or Controlled rolled is ok for thickness belows 40mm (1.5inch) normally.If above 40mm (1.5inch),customers can choose Normalized for improve steel property.Stee plates SS400 is also the same.

MetalsDepot® - Buy A36 Steel Plate Online!

Steel Plate, also known as Hot Rolled A36 Steel Plate is a structural quality steel plate used for a large variety of general construction and industrial applications.. Specifications: ASTM A36, AISI A-36 ; Applications: base plates, gussets, liners, road plates, trench covers, etc. Workability: Easy to Weld, Cut, Form and Machine

Steel Bars | Super Steel

Steel Bars. Steel bars are used in a variety of industries such as the cement industries, military equipment, ship building, part machining processing, technology related, paper industries, and other types of architectural related businesses.

ss41 plate steel - pressure vessel steel plate grades

Steel Plate Ss41, Steel Plate Ss41 Suppliers and . And whether steel plate ss41 is iso, sgs, or bv. There are 491 steel plate ss41 suppliers, mainly located in Asia. The top supplying countries are China (Mainland), India, and South Korea, which supply 98%, 1%, and 1% of steel plate ss41 respectively.[PDF]

Steel Plate & Sheet - Alro Steel

Steel Plate & Sheet Steel Plate, Floor Plate & Sheet Products. 3-2 alro 888-888-ALRO 2 5 7 6 Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including;

ss400 SS41 S45C steel plate made in tianjin

Ss400 S45c Steel, Ss400 S45c Steel Suppliers and ...A wide variety of ss400 s45c steel options are available to you, such as aisi, gb, and astm. You can also choose from steel plate, steel coil. As well as from hot rolled, cold rolled. And whether ss400 s45c steel is galvanized, coated, or polished. There are 1,148 ss400 s45c steel suppliers, mainly located in Asia.

SS400|SS400 STEEL PLATE__Steel Supplier

ss400|ss400 steel plate SS400 is the Japanese steel material of a marking, the equivalent of the domestic Q235 steel. Foreign standards of structural steel often classified according to tensile strength, such as SS400 (Japan is so marked), where the minimum value of 400 means that σb to 400MPa high strength steel is σb ≥ 1373 Mpa steel.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.