Tel: +86-371-86151827

304 annealed stainless coil

Steel grade:304 annealed stainless coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

304 annealed stainless coil Introduction

Stainless Steel Coils ~ 302 / 304 ~ Annealed - Sidecuts

Can't find the 304 Annealed coil you're looking for? Try 304L instead! Type 304L is a low carbon (.03 max) version of Type 304 that facilitates welding, but can often be used in place of 304 Annealed in most applications. Visit our 304L Annealed section to see if there's something that …

Stainless Steel Coils ~ 304L Annealed - Sidecuts

Sidecuts is your online source for small, high quality strip materials delivered quickly. We specialize in 300 series, 17-7, Heat Treat Tool Wrap and C1008 / C1010 alloys provided in coil and sheet form.

304 Stainless Steel Strip | 304 tempered strip| 304 Slit Coil

28 rows· 304 stainless steel strip and slit to width coil, ASTMA-666, is similar to Type 302, but has a …ITEM #ITEM NAMEGAUGETEMPER3200536304 Stainless Steel Strip X Coil0.0053 inAnnealed3200706304 Stainless Steel Strip X Coil0.0070 inAnnealed3201005304 Stainless Steel Strip X Coil0.0100 inAnnealed3201006304 Stainless Steel Strip X Coil0.0100 inAnnealedSee all 28 rows on gibbswire

304L Stainless Steel Coil Stock & Stilling | Almetals

Almetals provides 304L stainless steel coil stock and precision slitting in a variety of alloys using state of the art technology. ... 304L Stainless Steel UNS S30403. 304L grade with 0.030% maximum carbon is similar to the 304 grade, but with much enhanced performance in the sensitization range. ...

304 L Stainless Steel UNS S30403 | Ulbrich

Description

304 Stainless Steel and 304L Stainless Steel Sheet, Coil ...

304 / 304L stainless steel, also known as 18/8 stainless and often referred to as 302, is the most common stainless steel. 304 stainless steel contains a higher chromium and lower carbon content than other variations of type 302. It can be used in an "as welded" condition, while 302 must be annealed. AISI 304 is used in a variety of household and industrial applications.

Type 304 - Annealed | Precision Steel Warehouse, Inc.

precisionsteel› …› Stainless Steel› Chemical CompositionChemical composition of type 304 annealed stainless steel. Call Precision Steel today for more information!

Stainless Coil - Prometco

Prometco is a distributor of Stainless Steel and Aluminum Slit Coil products shipping throughout US, Mexico and Canada.

Stainless Steel Strip, Coil, and Sheet

Specializing in 1/4 Hard, 1/2 Hard, 3/4 Hard and Full Hard 301, 302, 304 and Annealed 410 & 420 Stainless Steel Coil, Strip & Sheet

Stainless Steel Strip & Slit Coil - Stainless Spring Wire

304 stainless steel strip and slit to width coil, ASTMA-666, is similar to Type 302, but has a maximum carbon content of 0.08%. This material has an excellent combination of …

304 Stainless Steel UNS S30400 | Ulbrich

Stainless Steel Grade 304 is the standard 18/8 (18% chrome, 8% nickel) austenitic stainless steel. It is a non-magnetic alloy in the annealed condition but becomes magnetic as it is cold worked. It is the most commonly used of all stainless grades.

Stainless Steel Strip Foil Coil - Titanium Metals Corporation

slit up to 12" Wide by coil custom re-rolled from Stock 304 Stainless Steel Coil 304 DDQ Deep Draw Quality Chromium-Nickel Alloy Annealed or custom Tempered: 1/8 Hard, 1/4 Hard, 1/2 Hard, or per Rockwell B or C scale, or per Tensile range: UNS S30400 AISI Type 304 SS AMS 5501, AMS 5513 AMS 5910, AMS 5911 AMS 5912, AMS 5913 ASTM A240, ASTM A666

Type 304 - Annealed | Precision Steel Warehouse, Inc.

precisionsteel› …› Stainless Steel› Chemical CompositionChemical composition of type 304 annealed stainless steel. Call Precision Steel today for more information!

304 Stainless Steel UNS S30400 | Ulbrich

Stainless Steel Grade 304 is the standard 18/8 (18% chrome, 8% nickel) austenitic stainless steel. It is a non-magnetic alloy in the annealed condition but becomes magnetic as it is cold worked. It is the most commonly used of all stainless grades.

Stainless Steel - Kloeckner Metals Corporation

Popular for its superior strength, corrosion resistance, and machinability, stainless steel has become a staple of the metals industry. In addition to a full inventory of stainless steel in virtually every shape, size, and grade, Kloeckner offers customized supply chain solutions and is able to deliver product to each customer’s exact specifications.

Type 304 Stainless Coil - Scott Stainless Steel

Type 304 is the most versatile and frequently used chromium nickel stainless steel. It is an all-purpose alloy with a multitude of benefits. It has good corrosion and oxidation resistance, performs well in terms of formability and weldability and is easy to clean.

304 Stainless Steel Coil | Clinton Aluminum

Product Description. The 304 stainless steel coil is made with 18 percent chromium and 8 percent nickel.It is a corrosion-resistant metal that is widely used for various applications. Because it has a low content of carbon (which could produce dangerous carbides), it is safe for use in applications involving the kitchen, such as sinks, saucepans and other kitchen equipment.

Stainless Steel Strip, Coil, and Sheet

Specializing in 1/4 Hard, 1/2 Hard, 3/4 Hard and Full Hard 301, 302, 304 and Annealed 410 & 420 Stainless Steel Coil, Strip & Sheet

Annealed 304 Stainless Steel Wire

After annealing of SS 304 spring wire (cold worked/shaped) should it be left to. Stainless Steel Wire Mesh - Stainless Steel Coil Wire | Bright Annealed. Stainless Steel Wire Mesh can supply coils of bright annealed wire for Tie Wire and Guard Wire SSAW 304 B 0.90, 0.90, 25 - 35, 198.97, 650 - 750. SSAW 304

0.06" T-304-#4 Annealed Stainless Sheet - Online Metal Store

Stainless #4 Sheet 304 Annealed Part #: 718. The #4 finish is the brushed finish you see in most restaurants and professional kitchens. Stainless Steel Sheet T-304/304L (0.06") is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability.

Steel Coil: Hot Rolled, Annealed, Cold Drawn Brite ...

These are formulated to produce the appropriate chemical composition and resultant uniform properties in wire that our customers expect. Operations also include annealing to bring about full softness and maximum ductility, and heat treating to impart mechanical …

Hot Rolled Plate | North American Stainless

Hot Rolled Plate. NAS provides hot rolled product in annealed and pickled condition in plate form (PMP-Discrete). We also offer a plate product in semi-finish condition that has not been annealed or pickled.

Stainless Steel Products and Services - Scott Stainless Steel

Stainless steel is our only business. Stainless steel strip coil and wide coil is our primary business. We stock a full range of austenitic (300 and 200 series) and ferritic (400 series) grades. Stainless Steel Grades Austenitic Grades The austenitic grades, often referred to as the chromium nickel types, are generally non-magnetic, easy to ...

ZCS Stainless Steel Co.,LTD : China Stainless Steel Coil ...

ZCS Stainless Steel Co.,LTD: Core agent of Zhongjin Metals and Jinhai Stainless Steel Company. Factory price here! We have large stock of 201 and 304 stainless steel coils with high quality. We provide both cold-rolled and hot-rolled steels. Resistant to …

Bright Annealed Stainless Steel Coil Wire - SSWM

SSWM can supply coils of bright annealed stainless steel wire for use in Tie Wire and Guard Wire applications delivered across Australia. We sell bulk coil tie wire, 5kg tie wire rolls, belt packs, guard wire, dropper wire and tracer wire in 304 and 316 grade.

Stainless Steel FAQs | Mid America Stainless

4. What is the difference between 304 and 316 stainless steel? 304 contains 18% chromium and 8% nickel. 316 contains 16% chromium, 10% nickel and 2% molybdenum. The moly is added to help resist corrosion to chlorides (like sea water and de-icing salts). 5. Is stainless steel magnetic? There are several types of stainless steel.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.