Tel: +86-371-86151827

aisi 1018 hr sheet low carbon steel plate

Steel grade:aisi 1018 hr sheet low carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

aisi 1018 hr sheet low carbon steel plate Introduction

Hot Rolled Carbon – Olympic Steel

olysteel› ProductsOlympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products COR-TEN®, DOMEX ™, EX-TEN®, FREMAX® steel products and more.

Hot Rolled 1018 Carbon Steel :: MakeItFrom

Hot rolled SAE-AISI 1018 is SAE-AISI 1018 steel in the hot worked condition. The graph bars on the material properties cards below compare hot rolled SAE-AISI 1018 to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set.

AISI 1018 Mild/Low Carbon Steel - Materials Engineering

Introduction

AISI 1018 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 1018 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

1018 Hot Rolled Steel Properties - stainless steel sheets ...

AISI 1018 Carbon Steel: Forging Facts & Characteristics . ... 1018 Cold Roll Steel Round Bar A low carbon steel wi 1018 has good case hardening properties and excellent machinability. 1018 Hot Roll Steel Round Bar ... Cold rolled steel itself is desirable due to its better surface finish and better properties. Steel Hot Rolled Sheet and Plate ...

AISI 1018 Steel, hot rolled, quenched, and tempered

AISI 1018 Steel, hot rolled, quenched, and tempered Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon Steel. Material Notes: Medium low-carbon steel, has good weldability and slightly better machinability than lower carbon grades. ... AFNOR NF A33-101 AF42C20, DIN 1.0453, DIN C16.8, DGN B-301 1018 (Mexico ...[PDF]

Steel Plate & Sheet - Alro Steel

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

Aisi 1018 Carbon Steel Plate, Aisi 1018 Carbon Steel Plate ...

Alibaba offers 101 aisi 1018 carbon steel plate products. About 89% of these are steel sheets. A wide variety of aisi 1018 carbon steel plate options are available to you, such as aisi, astm, and bs.

Hot Rolled Carbon – Olympic Steel

olysteel› ProductsOlympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products COR-TEN®, DOMEX ™, EX-TEN®, FREMAX® steel products and more.[PDF]

Steel Plate & Sheet - Alro Steel

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

AISI 1018 Carbon Steel | SAE-AISI 1018 (G10180) Carbon ...

AISI 1018 Steel is a Mild/Low Carbon Steel that has an excellent weldability and produces a uniform and harder case and it is considered as the best steel for carburized parts.AISI 1018 mild/low carbon steel offers a good balance of toughness, strength and ductility. With higher mechanical properties, this AISI 1018 Hot Rolled Steel also includes improved machining characteristics along with ...[PDF]

Datasheet for Steel Grades Carbon Steel AISI 1018

This page is mainly introduced the AISI 1018 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of AISI 1018,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Carbon Steel AISI 1018 Sheet Plate, SAE-AISI 1020 Mild ...

The Carbon Steel AISI 1018 / AISI 1020 Sheet Plate is the steel plate certified with AISI having the grade 1018 and 1020. There is a higher range of demand and uses for the carbon steel sheet plates. They are providing great attributes and aspects in the application of industrial purposes.[PDF]

AISI 1018 Mild/Low Carbon Steel - Yiannakis Andreou …

AISI 1018 mild/low carbon steel can be instantly welded by all the conventional welding processes. Welding is not recommended for AISI 1018 mild/low carbon steel when it is carbonitrided and carburized. Low carbon welding electrodes are to be used in the welding procedure, and post-heating and pre-heating are not necessary.

Hot Rolled 1018 Carbon Steel :: MakeItFrom

Hot rolled SAE-AISI 1018 is SAE-AISI 1018 steel in the hot worked condition. The graph bars on the material properties cards below compare hot rolled SAE-AISI 1018 to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set.

AISI 1018 Steel, hot rolled, quenched, and tempered

AISI 1018 Steel, hot rolled, quenched, and tempered Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon Steel. Material Notes: Medium low-carbon steel, has good weldability and slightly better machinability than lower carbon grades. ... AFNOR NF A33-101 AF42C20, DIN 1.0453, DIN C16.8, DGN B-301 1018 (Mexico ...

1018 Carbon Steel Sheet & Plate Suppliers India

Global Stainless is a leading supplier of Carbon Steel Material SAE 1018 Round Bars, Aisi 1018 Sheet & Plates, 1018 Low Carbon Steel Rod Wire, cold rolled steel sheet, hot rolled steel round bar in India.

1018 Hot Rolled Steel, 1018 Hot Rolled Steel Suppliers and ...

Alibaba offers 807 1018 hot rolled steel products. About 21% of these are steel sheets, 1% are metal building materials, and 1% are stainless steel sheets. A wide variety of 1018 hot rolled steel options are available to you, such as aisi, astm.

AISI 1018 Steel as Cold Rolled Quality in American Standard

Being a mild steel; 1018 cold rolled steel has low carbon content for it yields a uniform and tougher item and it is related as the paramount steel for carburized components. AISI 1018 cold rolled steel comprises a virtuous equilibrium of stiffness, plasticity and tensile strength.

ASTM A36 Steel Composition, Properties, Hardness ...

Introduction. ASTM A36 steel is one of the most widely used carbon structural steels, although the the max carbon content of A36 steel is 0.26%, it is considered by many to be mild steel (content of carbon ≤ 0.25%), because its data sheet and properties are very close to those of low carbon steel.. A36 material is often compared to SAE / AISI 1018 because of their similar chemical ...

Speedy Metals - 1018 Steel Flat

Buy 1018 Steel Flat from Speedy Metals, America's favorite online metal store with unsurpassed service, highest quality and best selection. ... Flat Plate Round Sheet Square. PLASTIC . 6/6 Nylon Rod Acetal Rod. ... plates, spacers and fixtures. C1018 is suitable for all applications that do not require the greater strength of high carbon and ...

Carbon Steel Sheet Stock, Plates, Bars and Coils - Carbon ...

Carbon steel blanks, flats, bars, plates and sheet stock from Grainger come in a variety of widths, lengths and thicknesses for your industrial applications. Select low-steel and mild-steel rectangular or square carbon steel bars in hot-rolled and cold-rolled tempers that are readily brazed or welded, good for screw machining and that offer you ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.