Tel: +86-371-86151827

casting steel c45 carbon steel plate

Steel grade:casting steel c45 carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

casting steel c45 carbon steel plate Introduction

C45 carbon steel steel plate - hopkinsplasticsurgery

Special Steels - Carbon Steel, Alloy Steel, Free Cutting, … Manufacturer of Special Steels - Carbon Steel, Alloy Steel, Free Cutting, etc - RINL VSP Steel Bars EN8 / EN8D / C45 / CK45 / EN8DS, RINL VSP EN8 / C45 / Ck45 / 45C8 / S40C Medium Carbon Steel, RINLVSP MS …

C45 Carbon Steel - West Yorkshire Steel

West Yorkshire Steel are steel stockholders and suppliers of C45 carbon steel round, square and flat bar. Bars can be sawn to your required length in 1 off or multiple cut pieces. West Yorkshire Steel supply flame cut steel profiles in grade C45, which can be surface ground if required.

C45 Carbon Steel Plates, C45 Sheets Supplier, C45 Plates

The alloying elements in C45 Carbon Steel Plates tend to form either solid solutions or compounds or carbides, where these alloying elements also have an effect on the eutectoid temperature of the steel. Manganese and nickel in SC 45 Carbon Steel Coils lower the eutectoid temperature and are known as austenite stabilizing elements.[PDF]

Datasheet for Steel Grades Carbon Steel C45

This page is mainly introduced the C45 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of C45,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

Carbon Steel Plates - C45 Carbon Steel Plates - Plastic ...

Jai Ganesh Steel Carbon Steel Plates Suppliers in Delhi - India. ... C45 Plastic Mould Steel (1) Carbon Steel Plates (1) H 13 Hot Die Steel (1) ... Plastic Moulds Steel (8) Rubber Moulds Steel (8) Stavax ESR Plastic Mould Steel (1) Steel For Paver Moulds (6) Steel Pressure Die Casting Moulds (1) Structural steel (1) Tools and alloys Steel (5 ...

Cast Steel Plate, Cast Steel Plate Suppliers and ...

Alibaba offers 38,867 cast steel plate products. About 1% of these are steel sheets, 1% are dishes & plates, and 1% are stainless steel sheets. A wide variety of cast steel plate options are available to you, such as astm, aisi, and din.

C45 - BEBON steel - C45 steel plate

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel.. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non alloy steels,these steels are for general engineering purposes

C45 steel

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. C45 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Products Archive | P20 Steel | Hot Die Steel | Stavax ESR ...

C45 PLASTIC MOULD STEEL PLATE BY JAI GANESHSTEEL In fact, C45 Plastic Mould Steel Plate is the Best Product. And also, The Quality Product by Jai Ganesh Steel. Not only this but also the Unique Product. Above all, We are the Top Leading Stockiest. As well as Supplier. Especially, Engaged in Customize size Manufacturing. After all, C45 Plastic Mould Steel Plate is […]

Steel Forming Process: Hot Rolled, Cold Rolled, Forging ...

Steel Forming Process: Hot Rolled, Cold Rolled, Forging & Casting Search for: When choosing a steel materials for a job, it is important to know the difference between the different types of steel grades, steel process available, how it is used and the advantages of including it in …

C45 Carbon Steel Plates Manufacturers & Suppliers, Buy C45 ...

steelplates.in› Steel Plates› Carbon SteelC45 steel plates are an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 steel plates are equivalent to EN8 steel plates and are widely used for general engineering purposes. C45 carbon steel plates are supplied with EN 10204 3.1 mill certificate, please request when placing any orders.

China Cast Steel Castings, Mild Steel, Medium Carbon Steel ...

China Cast Steel Castings. Dandong Foundry cooperated with local steel foundries to produce various steel castings for our clients. The materials include low mild carbon steel, medium carbon steel, high carbon steel, low alloy, alloy steels.

C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C - Otai ...

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 ...[PDF]

Datasheet for Steel Grades Carbon Steel C45

This page is mainly introduced the C45 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of C45,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

C45 Carbon Steel Plates Manufacturers & Suppliers, Buy C45 ...

steelplates.in› Steel Plates› Carbon SteelC45 steel plates are an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 steel plates are equivalent to EN8 steel plates and are widely used for general engineering purposes. C45 carbon steel plates are supplied with EN 10204 3.1 mill certificate, please request when placing any orders.

what is c45 steel - Carbon steel,Alloy steel,Spring steel ...

Katalor have what is c45 steel suppliers and manufacturer ,if you need what is c45 steel price and specification ,please contact us. ... gupan777 Steel Plate - gupan777.blog.163 ... 2.Carbon steel:WCB,C45,C20. 3.tool steel,and heat-resistant steel . 4.Alloy steel :15Cr3,15CrNi6,16MnCr5,34CrMo4,42CrMo4,56NiCrMoV7,ect. 5.Monel alloy and Hastelloy ...

C45 Plates, Aluminium Plates ... - Alloy Steel Plates

C45 steel plate, EN 10083 C45 steel plate, under EN 10083 standard, we can regard C45 steel plate as high carbon steel. C45 steel plate is one mainly of high carbon steel,EN 10083 C45 steel plate is for quenching and tempering. Technical delivery conditions for non-alloysteels, these steels are for general engineering purposes

C45 Round Bar | AISI 1045 | DIN 1.1191 | JIS S45C - Otai ...

Steel C45 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. C45 is a medium strength steel with good machinability and excellent tensile properties. C45 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 ...[PDF]

C45 Carbon Steel - westyorkssteel

C45 Carbon Steel C45 steel stockholders and suppliers, delivering to the whole of the UK. C45 is a medium carbon steel grade offering reasonable tensile strength. Supplied in the cold drawn or hot rolled condition, tensile properties can vary but are approximately between 500-800 N/mm². This grade can be flame or induction hardened to

C45 steel sheet,C45 steel Mechanical Properties,C45 steel ...

C45 steel sheet Physico-chemical testing items for products of the plant include tensile test ,hardness test ,impact test ,flattening test ,and chemical composition analysis ,etc .C20,C45 steel pipes are manufactured by cold drawn process.. C45 is a medium carbon steel is used when greater strength and hardness is desired than in the "as rolled" condition.

C45 1145 Non-Alloy Medium Carbon Steel Plate

C45 Y45ca 1145 En 1.0503 Non-Alloy Medium Carbon Steel … Carbon Steel Plate, Medium Steel Plate, Non-Alloy Steel Plate manufacturer / supplier in China, offering C45 Y45ca 1145 En 1.0503 Non-Alloy Medium Carbon Steel Plate, Stkm13A Carbon Steel Pipe, 1050 3003 2014 Aluminium Plate / Aluminum Sheet and so on.

China Cast Steel Castings, Mild Steel, Medium Carbon Steel ...

China Cast Steel Castings. Dandong Foundry cooperated with local steel foundries to produce various steel castings for our clients. The materials include low mild carbon steel, medium carbon steel, high carbon steel, low alloy, alloy steels.

C45/1045 Steel Round Bars, C45 Steel Rods, Flat Bars, Plates

steelbars.in› Carbon SteelC45/1045 carbon steel bars supplied by Metline Industries are certified to highest level of industry standards, and are accompanied by Mill Test Certificates, as per EN 10204 3.1. We can supply cut to size C45 /1045 carbon steel bars, with both small and wide diameters.

C45 Steel Plate | Murray Steel Products

C45 grade steel is a medium carbon steel offering moderate tensile strengths. The material is capable of through hardening by quenching and tempering on limited sections but can also be flame or induction hardened to Hrc 55.

Carbon Steel Plates - C45 Plate Manufacturer from Mumbai

Manufacturer of Carbon Steel Plates - C45 Plate, C20, C45, C50, C60, C35, C35K, C40 Steel Plate, C50 Steel Plate and ASTM A36 Steel Plate offered by Sterlite Metal Industries, Mumbai, Maharashtra.

C45 Plates | Sheets Carbon Steel Stockist, Suppliers ...

Description Carbon Steel C45 Plates / Sheets . Description of Carbon Steel C45 Grade : C45 Grade Steel is a Medium Carbon Steel offering moderate tensile strengths. The material is capable of through hardening by Quenching and Tempering on limited sections but can also be flame or induction hardened to Hrc 55.This grade is most commonly supplied in an Untreated or Normalized Condition and is ...

Cast Steel vs. Cast Iron Analysis | Castings for Industry

Which is an iron casting with carbon content higher than 2%. Cast steel usually refers to normal carbon steel and alloy steel. Which is a steel casting with carbon content lower than 2%. Therefore, no big difference from the chemical content and raw materials for cast iron vs cast steel. However, their physical properties have many differences ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.