Tel: +86-371-86151827

center distance of 50 mm or 100mm lattice steel plate

Steel grade:center distance of 50 mm or 100mm lattice steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: []

center distance of 50 mm or 100mm lattice steel plate Introduction

Steel Grating - Sheets and Panels – Processing and Parameters

Dense steel grating spacing is less than 25mm. Steel grating is mainly used for demanding applications. 5. Cross Bar Specification: common specifications: 5 × 5,6 × 6,8 × 8mm. 6. Cross Bar Spacing: Center distance between two adjacent bar is typically 50mm, 100mm. 7. Length of Steel Grating Panel:. General steel grating length ≥ 800mm.

4mm steel plate | eBay

ebay› Search› 4mm steel plateFind great deals on eBay for 4mm steel plate. Shop with confidence. Skip to main content. eBay Logo: ... 1Pc 304Stainless Steel Foil /Plate/Sheet DIY 4mm*100mm*200mm High Quality. Brand New. $36.50. From China. Buy It Now. ... 1 Piece 65Mn High Carbon Hardened Spring Steel Plate Strip 0.1mm x 115mm x1000mm See more like this. 1/4" Steel Plate ...

3mm steel plate | eBay

ebay› Search› 3mm steel plateFind great deals on eBay for 3mm steel plate. Shop with confidence. Skip to main content. eBay Logo: ... 1pcs 304 Stainless Steel Fine Polished Plate Sheet 3mm x 100mm x 100mm. Brand New · Unbranded. $13.95. From China. Was: Previous Price $14.68. Buy It Now. ... +$1.50 shipping. 1pcs 304 Stainless Steel Fine Polished Plate Sheet 3mm x 100mm x ...

Lathe Milling Vertical Slide 100 x 125 mm & 2" (50 mm ...

amazon› …› Power Tools› Milling Machines* lathe vertical slide for milling operation. * t- slotted table bed size is 125 mm x 100 mm * designed in imperial dial graduations standard * table size 125mm x 100mm has 3 tee slots on the table * 10 mm wide at the top of the tee 15 mm wide at the bottom of the tee allows milling on your myford lathe approximately 80 mm of table movement self centering vice precision self centering milling ...Price: 179

Framing schematics -

Modern open steel sections have parallel flanges. The serial size varies in increments of about 50 mm depth for the shallower sections, and about 75 mm for the deeper sections. The internal dimensions between the flanges are governed by the rolling mills used and …

Simple Heat Transfer Problems at Iqsoft

Simple Heat Transfer Problems with Solutions References are from: Incropera, F.P. and De Witt, D.P., Introduction to Heat Transfer, John Wiley and Sons, 2 nd. Edition, New York, 1996. S.1 The heat flux through a wood slab 50 mm thick, whose inner and outer surface temperatures are 40 and 20°C, respectively, has been determined to be 40 W/m 2.

Product - WEBFORGE

The design is simple: no small support beam, simple structure, simplified design; no need to design a steel lattice plate details, stating only models, manufacturers and customers can design layout. Ventilation, lighting, explosion-proof, heat dissipation, good antiskid performance.[PDF]


mm thick) was machined from the steel plate. A crack guide groove was machined on both sides ... International Centre for Diffraction Data 2003, Advances in X-ray Analysis, Volume 46. 239 ISSN 1097-0002. 3mm 2mm. 2.5mm 3 2 2.5 Incident beam slits ... -50 0 50 100 Lattice Strain (x10-6) Distance from the Crack Tip (mm) As-received. K=5 K=10.

Framing schematics -

Modern open steel sections have parallel flanges. The serial size varies in increments of about 50 mm depth for the shallower sections, and about 75 mm for the deeper sections. The internal dimensions between the flanges are governed by the rolling mills used and …

Solved: A Plate 100 Mm Wide And 15 Mm Thick Is ... - Chegg

A plate 100 mm wide and 15 mm thick is loaded in tension in the direction of the length. The plate contains an off-center crack, as shown in figure 2, with a crack length of 30 mm and distance d = 20 mm. The material is steel with critical stress intensity factor, KIC = 78 MPa(m)½ and Sy = 960 MPa.

Hebei Wentai Metal Co.,Ltd - 86wire-mesh

(4) hot dip galvanized steel grating bar: material Q235A, or 304 stainless steel for the bar, twisted square steel, square steel or six angles.Twisted square steel plate garden by drawing upon and twisted from side mode, the common specifications are 5 * 5,6 * 6,8 * 8mm and so on. Hot dip galvanized steel …[PDF]


line of lattice strain in the as-received condition. 5 0 -5 -10 -15 -20 -25 -30-300-250-200-150-100-50 0 50 100 150 200 250 300. Lattice Strain (x10-6) Distance from the Crack Tip (mm) In-Plane Through-Thickness Figure 3. Measured residual strains in the as-received, fatigue pre-cracked specimen as a function of the distance from the crack tip.

Galvanized Steel Grating BH_003 - sourcingmetals

Galvanized Steel Grating: Bearer Bar:25x3mm Crossing Bar:5mm,6mm BB pitch:41mm(center to center) CB pitch: 50mm. Steel frame lattice: Series 1(spacing 30mm steel plate)is the most common type, use in all industrial areas, this series of products of bearing flat-steel center distance 30mm for American standards.

Platform steel grid plate Supplier|hot-dip galvanized tread

Introduction to platform steel grille. The heavy-duty Platform steel grid plate is also called “hot-dip galvanized tread”. The platform steel grating plate is made of flat steel and cross-arranged according to a certain spacing and cross bar, and welded into a steel with a square lattice in the middle.

The platform steel grating|Metal railing| steel grating

The distance between the flat steel and the flat steel is: the center distance of two adjacent flat steels, usually 30MM, 40MM and 60MM. Crossbar spacing: The center spacing of two adjacent rails is usually 50MM, 100MM, two. Our factory can also customize various types of steel …[PDF]

Mech 302 Heat Transfer HW5 Solution - Koç Hastanesi

The surface of the torus is exposed to a coolant corresponding to a convection coefficient of h = 50 W/m2K. b. A long, hot AISI 302 stainless steel bar of rectangular cross-section has dimensions w = 5 mm, W = 7 mm, and L = 150 mm.[PDF]

orth merican teel onstruction onference Rules of …

steel weight is building height. A rough approximation for steel weight per square foot in a braced building using steel with Fy = 50 ksi is: Wt(psf) = stories/3 + 7 A three-story building would have a steel weight in the range of 8 psf and a 27-story building would require 16 psf. Certainly, this relationship is an over simplification.[PDF]


CHAPTER 3 STRUCTURAL STEEL TERMS/ LAYOUT AND FABRICATION OF STEEL AND PIPE Structural steel is one of the basic materials used in the construction of frames for most industrial[PDF]


A block of cast iron has dimensions of 50 mm by 30 mm by 10 mm at 15°C. Determine the increase in volume when the temperature of the block is raised to 75°C.

Flat Plate Deflection Calculator | Flat Plate Stress ...

Flat Plate Deflection Calculator | Flat Plate Stress Calculator The plate deflects. The middle surface (halfway between top and bottom surfaces) remains unstressed; at other points there are biaxial stresses in the plane of the plate.[PDF]

IZS31 cat en - Allied Electronics

Note) Static electricity elimination features are based on data from using a charged plate (size: 150 mm x 150 mm, capacitance: 20 pF) as defined in the U.S. ANSI standards (ANSI/ESD, STM3, 1-2000). Use this as a guideline for model selection only because the value varies depending on the material and/or size of the subject.

4 x 8 steel plate | eBay

ebay› Business & IndustrialFind great deals on eBay for 4 x 8 steel plate. Shop with confidence. Skip to main content. eBay Logo: ... Distance: nearest first; View. Gallery View. Customize. 49 results. Save this search. ... +$8.50 shipping. 1 X 4 X 8" Steel Flat Bar Plate THICK Blacksmith Bench Plate Welding Bracing. Brand New.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
0.3-3.0 mm
coil or as per requirement.
coil or as per requirement.
No.1 or 1D
GB/T4237-2015 ASTM A240/A240M JIS G4304
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.


Please send your processing requirement/ the drawings to or leave a message below. Our professional after-sales personnel will response you in 24 hours.