Tel: +86-371-86151827

steel structure building corrugated plate series

Steel grade:steel structure building corrugated plate series

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel structure building corrugated plate series Introduction

Corrugated Steel Plate Structure for Extra Large Span

Corrugated Steel Plate - Variety, Flexibility & Utility. Different from corrugated steel pipe, corrugated structural plates are shipped to the customers in nested plate bundles and bolt-assembled into the final shape on the job site. When the diameter or span exceeds 2000 mm, corrugated structural plates becomes a better choice, especially in international trades.

Structural Steel Plate Overview | National Corrugated ...

Steel Structural Plate. Steel structural plate consists of corrugated steel sections that are bolted together to form the required shape. The corrugated sections are commonly referred to as plates and have a standard corrugation profile of 6 x 2 inches that are …

The Use of Corrugated Metal Pipe and Structural Plate for ...

Shape Options[PDF]

Standard Specification for Corrugated Steel Structural ...

with end treatment as shown on plans; (2) Structural plates and fasteners for one corrugated steel structural plate pipe-arch, in accordance with ASTM A761M – , 3860-mm span by 2460-mm rise, 5.54-mm plate thickness, 150 by 50-mm corrugations, 27.0-m nominal centerline length with square ends, longitudinal seams with four M20 bolts per ...

Corrugated Steel Pipe and Structural Plates

Corrugated steel plate structures are versatile, durable, economical and sustainable project solutions for numerous application domains. Perforated Metal Culvert Pipe As a specially fabricated corrugated steel pipe, perforated culvert pipe is used in storm water infiltration, subsurface permeable drainage, etc.

CSP Pacific - Steel Multiplate Structures

Design, manufacture and Installation requirements for Steel Multiplate structures are specified in AS/NZS 2041: Buried Corrugated Metal structures.This is a joint Australian and New Zealand Standard, and has several parts. Those applicable to Steel Multiplate are as follows:. AS/NZS 2041.1:2011 Buried Corrugated Metal Structures - Part 1 Design Methods

MULTI-PLATE Structures by Contech

Structural Plate for Pedestrian and Recreation Traffic Loads. The many shapes and sizes of structural plate structures, BridgeCor, MULTI-PLATE, Aluminum Structural Plate and SUPER-SPAN, as well as their low cost and ease of installation, make them a mainstay for pedestrian and golf course bridges, overpasses, underpasses, and tunnels.

Design, fabrication and installation of construction products

Joists are custom-made structural steel components used to support the floors or roof of a building. Learn more . Steel Deck. Steel deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof. ... Canam-Buildings, a Canam Group Business ...

Corrugated Metal Culvert Pipe - Your Right Smart Choice

Four types of normal corrugated metal culvert pipes are mainly supplied by our company: round corrugated steel pipe, semi-circular metal corrugated pipe, corrugated steel pipe arch, pipe fittings and accessories. Here are the benefits and available applications of these quality products.

MULTI-PLATE Structures by Contech

Structural Plate for Pedestrian and Recreation Traffic Loads. The many shapes and sizes of structural plate structures, BridgeCor, MULTI-PLATE, Aluminum Structural Plate and SUPER-SPAN, as well as their low cost and ease of installation, make them a mainstay for pedestrian and golf course bridges, overpasses, underpasses, and tunnels.

Price is affordable and easy to install color steel plate

1.The substrate of color steel plate can be divided into a cold rolling base plate,a hot-dip galvanized base plate and an electro galvanized substrate. 2.The coating types of color steel plate can be divided into polyester, silicon modified polyester, vinylidene fluoride,two plastic sol.Color plate color can according to user requirements into ...[PDF]

TruePlate™ Structural Plate - truenorthsteel

AASHTO M167 Corrugated Steel Structural Plate, Zinc Coated for Field Bolted Pipe, Pipe Arches and Arches AASHTO M219 Corrugated Aluminum Alloy Structural Plate for Field Bolted Pipe, Pipe Arches and Arches INSTALLATION ASTM A807 Practice for Installing Corrugated Steel Structural Plate Pipe for …

Metal Buildings 101 – the basics of metal building systems ...

Learn the basics of metal building system construction. Whether a barn or a church building, the same principles of construction apply. ... form a galvanic cell, with the higher metal in the galvanic series being the anode. The anodic metal, being ... Butt Plate The end plate of a structural member usually used to rest against a like plate of ...

Corrugated Steel Plate | Products & Suppliers | …

globalspec› PRODUCTS & SERVICESDescription: This specification covers corrugated steel structural plate, zinc-coated, used in the construction of pipe, pipe-arches, arches, underpasses, and special shapes for field assembly. Appropriate fasteners and accessory materials are also described.

Corrugated Steel Roofing Sheets Classification and Features

Our corrugated metal sheets have the features of insulation and durability. And the corrugated panels can be paintable and have galvanized rust resistant coating. The metal sheet can apply industrial and civil building, warehouse , special construction, large span steel structure house roof, interior and exterior decoration of the wall ...

Steel deck is a cold formed corrugated steel sheet - Canam ...

Steel deck is a cold formed corrugated steel sheet supported by steel joists or beams. It is used to support concrete or insulating membrane of a roof. It was developed to provide a structurally efficient product for use in roof and floor systems.

Metal Roofing Parts - Metal Building Components | ABC

ABC Metal Building Components. No metal building project is complete without the components that bring the roof and wall panels together. From structural products to fasteners and trim, ABC's expansive selection of metal building components provide support and longevity while allowing you to customize the performance and aesthetic of your structure.

Corrugated Metal | Industrial Metal Supply

When you need corrugated metal sheets that are lightweight, but provide high strength-to-weight ratio, look to IMS. Shop our corrosion-resistant sheets now!

steel tile sheet,corrugated steel sheet ... - Sukalp

Hangzhou Sukalp Trading Co., Ltd ,established in 2006, is a professional manufacturer and trader in these fields of all kinds of steel products, such as deformed steel bars,steel coils,corrugated steel sheets,sandwich panels,steel tile sheets,etc. Our products have been widely exported to Europe, USA, Middle East, South Korea, and Japan so on.

Steel Deck - New Millennium Building Systems

A steel plate at a column or wall inserted between the end of a bottom chord of a steel joist (bar joist) or Joist Girder to weld the bottom chord to or to restrain the bottom chord from lateral movement. ... a structural corrugated steel component used as the material layer between the primary structural components. ... New Millennium Building ...

cheap industrial corrugated insulated prefabricated steel ...

cheap industrial corrugated insulated prefabricated steel building, US $ 30 - 150 / Square Meter, Shandong, China (Mainland), DINGRONG, prefabricated steel building-1.Source from Laizhou Dingrong Steel Structure Co., Ltd. on Alibaba.[PDF]

Concealed Fastener Steel Roof and Wall Panel …

The resistance of steel roof and wall panels to meet design loads can be established through rational design, testing, or a combina-tion of both. Most concealed fastener steel roof and wall panels cannot be rationally designed for wind loads away from the structure because the …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.