Tel: +86-371-86151827

sus316j1l steel sheet dc01 dc02 dc03 dc04

Steel grade:sus316j1l steel sheet dc01 dc02 dc03 dc04

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sus316j1l steel sheet dc01 dc02 dc03 dc04 Introduction

Mild Steel Strip, DC01, DC04, DC03, Cold Rolled Uncoated ...

Mild Steel Strip, DC01, DC04, DC03, Cold Rolled Uncoated Mild Steel ... Mild Steel Strip and Mild Steel Coils are defined by their carbon content which governs both their basic mechanical properties of hardness and tensile strength and their ability to develop enhanced properties within various processes such as cold forming or heat treatment.

Steel Sheet Dc01 Dc03 Dc04 Steel Sheet

Click to view the corresponding English site:steel sheet dc01 dc03 dc04. Dc03 Dc04 Steel Products - ecplaza.net. Dc03 Dc04 Steel products ☆ Find Dc03 Dc04 Steel products, manufacturers Cold rolled steel coil/sheet Material: SPCC, DC01, DC02, DC03, DC04, st12, st13, st14 . Wholesale Cold Rolled Steel Dc04 - ec21

DC01 / 1.0330 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel DC01 (1.0330), Standards of steel DC01 (1.0330) Mechanical Properties of steel DC01 (1.0330) Equivalent grades of steel DC01 (1.0330) Tensile Strength, Elongation, Proof strength, Hardness[PDF]

Cold Rolled Steel Sheet for Drawing and Forming EN …

Cold rolled steel sheet for drawing and forming applications is produced in a broad spectrum of grades ... EN 10130 DC04 0,08 0,40 0,025 0,025 0,025 0,020 ... Cold Rolled Steel Sheet for Drawing and Forming EN 10130 DC01 – DC06 . For further information, contact: ArcelorMittal South Africa Limited, PO Box 2, Vanderbijlpark 1900. Toll free ...

Steel Sheet Dc01 Dc02 Dc03 Dc04 Spcc, Steel Sheet Dc01 ...

There are 333 steel sheet dc01 dc02 dc03 dc04 spcc suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of steel sheet dc01 dc02 dc03 dc04 spcc respectively. Steel sheet dc01 dc02 dc03 dc04 spcc products are most popular in South America, Mid East, and Southeast Asia.

China Cr Steel Sheet (DC01 DC02 DC03 DC04) - Tianjin …

DC01 Steel Sheet, DC02 Steel Sheet, DC03 Steel Sheet manufacturer / supplier in China, offering Cr Steel Sheet (DC01 DC02 DC03 DC04), 0.39mm 0.4mm 0.41mm 0.42mm 0.43mm 0.44mm 99.994% Pure Lead Foil for Laboratory, 99.994% Pure Lead Foil for Laboratory and so on.

Tata Steel - Cold-rolled - Steel for forming

tatasteeleurope› …› Products› Engineering› Cold-rolledand 140 N/mm 2 for DC01/3/4/5. Chemical composition. Cold-rolled steel for forming supplied by Tata Steel comply to the following cast analysis with maximum values in weight percentages unless otherwise shown: All values in weight %.

Dc01 Steel Sheet, Dc01 Steel Sheet Suppliers and ...

Alibaba offers 5,435 dc01 steel sheet products. About 81% of these are steel sheets, 3% are steel strips, and 3% are stainless steel sheets. A wide variety of dc01 steel sheet options are available to you, such as aisi, astm.

Spain UNE DC04 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. DC04 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

DC04 / 1.0338 Non-alloy quality steel - equivalent ...

Non-alloy quality steel Chemical composition of steel DC04 (1.0338), Standards of steel DC04 (1.0338) Mechanical Properties of steel DC04 (1.0338) Equivalent grades of steel DC04 (1.0338) Tensile Strength, Elongation, Proof strength, Hardness

Spain UNE DC03 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. DC03 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

SPCD Cold Rolled Steel Coil Sheet , Building Metals Steel ...

SPCD Cold Rolled Steel Coil Sheet , Building Metals Steel Sheet Coil DC01 DC02 DC03 . Description: Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling.

Dc04 steelsheet - pressure-vessel-steel

Dc04 steelsheet. Mild Steel Strip, DC01, DC04, DC03, Cold Rolled … Mild Steel Strip and Mild Steel Coils are low carbon variants with carbon levels of up to 0.12% as defined in BS 1449: part 1 1991, with such grades as CS1, CS2, CS3 and CS4.

China Cr Steel Sheet (DC01 DC02 DC03 DC04) - Tianjin …

DC01 Steel Sheet, DC02 Steel Sheet, DC03 Steel Sheet manufacturer / supplier in China, offering Cr Steel Sheet (DC01 DC02 DC03 DC04), 0.39mm 0.4mm 0.41mm 0.42mm 0.43mm 0.44mm 99.994% Pure Lead Foil for Laboratory, 99.994% Pure Lead Foil for Laboratory and so on.

SPCC DC01 DC02 DC03 DC04 JIS G 3141 SPCC Prime Soft …

China SPCC DC01 DC02 DC03 DC04 JIS G 3141 SPCC Prime Soft Hard 1020 Cold Rolled Steel Coil, Find details about China CRC Steel Coil Prices, 1.0mm Cold Rolled Steel from SPCC DC01 DC02 DC03 DC04 JIS G 3141 SPCC Prime Soft Hard 1020 Cold Rolled Steel Coil - Tianjin Boer King Steel Import and Export Co., Ltd.

Tata Steel - Cold-rolled - Steel for forming

tatasteeleurope› …› Products› Engineering› Cold-rolledand 140 N/mm 2 for DC01/3/4/5. Chemical composition. Cold-rolled steel for forming supplied by Tata Steel comply to the following cast analysis with maximum values in weight percentages unless otherwise shown: All values in weight %.

B10 - EN - fce.arcelormittal

This is a range of cold rolled non-alloyed mild steel grades with guaranteed maximum yield and tensile strength, guaranteed minimum ductility (elongation at fracture) and good formability (n and r values).These grades comply with the requirements of the EN 10130:2006 standard and are obtained after either batch or continuous annealing.

custom Cut DC01 DC02 DC03 DC04 SAE 1006 SAE 1008 …

Offer helical blade and forged ring,steel machining,custom Cut DC01 DC02 DC03 DC04 SAE 1006 SAE 1008 Cold Rolled Steel cutting sheet price,offer steel machining service,steel cutting,steel bevel,steel milling,steel cutting,steel welding,steel bending.

supplier of Dc04 steel sheet,A36,Q235B,Q345B steel plate ...

China Cr Steel Sheet (DC01 DC02 DC03 DC04), Find details about China DC01 Steel Sheet, DC02 Steel Sheet from Cr Steel Sheet (DC01 DC02 DC03 DC04) - Tianjin Standard Steel Co., Ltd. EN 10111 DD11 steel plate - BEBON INTERNATIONAL. iron dc01 steel - pressure-vessel-steel.

China DC01 DC02 ASTM 1010 Cold Rolled Steel Coil - China ...

Steel Coil, Cr Steel Coil, ASTM 1008 Coil manufacturer / supplier in China, offering DC01 DC02 ASTM 1010 Cold Rolled Steel Coil, PPGI Color Coated Corrugated Steel Roofing Sheet for Roof Tiles, 24 Guage PPGI Prepainted Corrugated Roofing Sheet for Roof Tile and so on.

Dc04 Steel Coil Price - Made-in-China - Manufacturers ...

Dc04 Steel Coil Price - Select 2019 high quality Dc04 Steel Coil Price products in best price from certified Chinese Steel Construction manufacturers, Steel Coil suppliers, wholesalers and factory on Made-in-China

CRC Steel Sheet DC01 Manufacturers and Suppliers - China ...

CRC steel sheet DC01 is under Europe standard - EN10130, the most popular grade under this standard. Except DC01, we can supply DC02, DC03, DC04, DC05, DC06 under the same standard EN10130. At the same time, we can supply CRC according to other standards - JIS G3141 / ASTM 1008 / EN10130 / DIN1623.1. We have more than 10 years experience in CRC ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.