Tel: +86-371-86151827

prime quality astm a656 grade 60 steel plate

Steel grade:prime quality astm a656 grade 60 steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

prime quality astm a656 grade 60 steel plate Introduction

prime quality ASTM A656 Grade 70 steel plate - pressure ...

Prime quality ASTM A656 Gr 60 HR plate sheet - samai.in. Supply Super thick steel plate and high performance steel grade with prime quality. ASTM A656 Gr 60 application; Contact Us. IS 2062 Steel Plates| IS 2062 Grade B Steel Plate IS 2062 ASTM A36 plate is a low carbon steel that exhibits good strength coupled with formability.

prime quality A656 Grade 50 steel plate - pressure vessel ...

【ASTM A656 Steel Plate】Grade 50, 60, 70, 80 | A656 Prime quality ASTM A572 Gr 55 steel sheet - jmotravels. ASTM A572 Steel Plate to Dubai - Octalequip. ASTM A572 plate is a high strength low alloy columbium vanadium structural steel, it’s strength is higher than the common plates ASTM A36, mainly used for the the transmission line

ASTM A656 Steel Plate - Grade 50, 60, 70, 80 | Leeco Steel ...

leecosteel› Steel Plate ProductsASTM A656 plate steel is a series of HSLA steels offering improved weldability, formability and notch toughness in the as-rolled condition. A656 plate steel is used in construction equipment, crane booms, truck frames and general fabrication. It is suitable at ambient and low temperatures.

ASTM A656 steel coil - Sell various grades of steel plates ...

Sell and export ASTM A656/A656M steel coil - Grade 50,Grade 60, Grade 70 and Grade 80 with chemical and mechanical properties. Contact us for width, length, thickness and solutions.

Steel Plate ASTM A656/A656M Grade 50 60 70 80 in Large …

Steel Plate ASTM A656/A656M Grade 50 60 70 80 in Large Stock. Mechnical and chemical properties of ASTM A656Grade 50 C Si Mn P S N V Nb 0.18 0.60 1.65 0.025 0.035 0.02 0.08 0.008-0.1 Yield Strength Mpa Tensile Strength Mpa Elongation in 2 inch % ≧34

Astm A656 Grade 70 Plates - indiamart

Home > Steel Bars, Rods, Plates & Sheets > Steel Plates > Carbon Steel Plates. ASTM A656 Grade 70 Plate, Thickness: 4-5 mm ... ASTM A656 Grade 70 Plates Exporter ASTM A656 Grade 70 Standards:-ASTM A656 Grade 70 Plates ... Prime quality of supply is not an event of chance it is a conscious effort to work efficiently to deliver material that ...Location: No. 107, Kika Street, 4th Floor, Gulalwadi, Bhuleshwar, 400004, Mumbai

Inventory — Ohio Steel Sheet & Plate

Inventory. Ohio Steel Sheet and Plate carries over 50,000-ton of domestic and foreign prime steel plate in multiple grades and sizes. The following is a short list of our most popular grades and sizes we keep on the floor for just in time deliveries.Location: 7845 Chestnut-Ridge Road Hubbard, OH, 44425 United States

ASTM A656 Grade 60 Plate, Thickness: 3-4 Mm | ID: …

Aesteiron Steels LLP - offering ASTM A656 Grade 60 Plate, Thickness: 3-4 Mm in Mumbai, Maharashtra. Read about company and get contact details and address. | ID: 10562400273Location: No. 107, Kika Street, 4th Floor, Gulalwadi, Supariwala Building, 400004, Mumbai

Carbon Steel Plate - Ryerson

Carbon Steel Plate Carbon steel plate is used for a variety of applications requiring durability and strength. Different alloys offer various levels of machinability, weldability, strength …

ASTM A656 steel coil - Sell various grades of steel plates ...

Sell and export ASTM A656/A656M steel coil - Grade 50,Grade 60, Grade 70 and Grade 80 with chemical and mechanical properties. Contact us for width, length, thickness and solutions.

Astm A656 Grade 70 Plates - indiamart

Home > Steel Bars, Rods, Plates & Sheets > Steel Plates > Carbon Steel Plates. ASTM A656 Grade 70 Plate, Thickness: 4-5 mm ... ASTM A656 Grade 70 Plates Exporter ASTM A656 Grade 70 Standards:-ASTM A656 Grade 70 Plates ... Prime quality of supply is not an event of chance it is a conscious effort to work efficiently to deliver material that ...

Steel Plate ASTM A656/A656M Grade 50 60 70 80 in Large …

Steel Plate ASTM A656/A656M Grade 50 60 70 80 in Large Stock. Mechnical and chemical properties of ASTM A656Grade 50 C Si Mn P S N V Nb 0.18 0.60 1.65 0.025 0.035 0.02 0.08 0.008-0.1 Yield Strength Mpa Tensile Strength Mpa Elongation in 2 inch % ≧34

ASTM A656 Grade 60 Plate, Thickness: 3-4 Mm | ID: …

Aesteiron Steels LLP - offering ASTM A656 Grade 60 Plate, Thickness: 3-4 Mm in Mumbai, Maharashtra. Read about company and get contact details and address. | ID: 10562400273

Prime High Quality A36 Astm Grade - Henan BBN

Prime quality ASTM A656 Grade 60 steel plate Advantage: We promise we can offer you the qualified Prime quality ASTM A656 Grade 60 steel plate at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many Prime quality ASTM A656 Grade 60 steel plate stock in our warehouse, So hereby, we sincerely ...

SA656 Grade 80 carbon and low-alloy steel in new Zealand

ASTM A656 Steel Plate . High Strength Low Alloy (HSLA) Structural Steel Plate; A656 Grade 50, 60, 70, 80; ... Grade 80 3/16" – 1" 48" – 120" ... call Leeco Steel at 1-888-828-7897 to be connected to a member of our sales team who can share more information about A656 Grade 60 and 70 plate steel.

Prime quality HR coil hot steel plate - w3s.in

Prime Quality Hot sale astm a50 steel plate – ... Prime quality ASTM A656 Gr 60 HR plate sheet - samai.in. hr cq scs, hr cq p&o, hr a-36 scs, hr a-36 p&o and hsla a1011 hslas-f ASTM A1011 CS TYPE B HOT ROLLED SHEETS HOT ROLLED PICKLED AND OILED SHEETS A prime quality low carbon sheet suitable for forming, punching, welding, etc. Sheets will ...

GUIDE TO SELECTION- PLATES | The Metal Store

GUIDE TO SELECTION- PLATES: The Metal Store. LOW CARBON STEEL PLATE. HR CARBON fromRyerson is an economical, general purpose steel for a wide variety ofapplications. 5/8” and lighter is held to a .25 max. carbon; over 5.8” platehas a carbon range of .10 to .33.. AISI 1015 isstocked in thicknesses ¾” and under for the best forming and weldingcharacteristics.

SA656 Gr 50 low alloy steel plate - KATALOR STEEL

ASTM A656 Steel Plate - Grade 50, 60, 70, 80 | Leeco Steel ... leecosteel› Steel Plate ProductsA656 Steel Plate ASTM A656 plate steel is a series of HSLA steels offering improved weldability, formability and notch toughness in the as-rolled condition. A656 plate steel is used in construction equipment, crane booms, truck frames and general ...

ASTM A588 & A606 Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsLeeco Steel distributes ASTM A588 and A606 steel plates that are corrosion-resistant, high-strength low-alloy steel plate. A588 and A606 steel plates are excellent for welding, riveting or bolting in construction applications. We offer various thicknesses, lengths, and widths to meet your specifications. Request a quote today!

ASTM A656 - SSAB

Grades: A656 GR 100, A656 GR 50, A656 GR 60, A656 GR 70, A656 GR 80. ASTM A656. The ASTM A656 specification is the Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability for plates in applications where increased strength-to …

lowest price ASTM A572 70 Carbon steel plate

astm a572 steel plate - AlibabaAlibaba offers 4,080 astm a572 steel plate products. About 95% of these are steel sheets, 1% are stainless steel sheets. ... ASTM A572 GR.70 carbon steel plate a283 grade c . US $400-600 / Ton . 0.5 Tons (Min. Order) (5) ... Our goal is offer the best quality products with the lowest price and best service . astm a572 grade 65 steel plate.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

ASTM A-588 Gr. A/B ASTM A-588 Gr. A/B steel plate offers all the advantages of ASTM A572-50 but is produced with elevated levels of copper to add corrosion resistance. Because of the self-repairing, natural oxide patina, this "weathering" grade is often used in unpainted applications such as bridges, utility sign/ poles and highway structures.

Plate - McNeilus Steel, Inc.

ASTM A572 is a high strength low alloy steel that offers a higher strength than plain carbon steel plates – plus ductility, weldability, formability, toughness and fatigue strength. A572 meets a minimum strength requirement (dependent on grade) and provides good workability and weldability at a moderate price.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.