Tel: +86-371-86151827

gas heater plate monel 400 special alloy nickel steel

Steel grade:gas heater plate monel 400 special alloy nickel steel

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

gas heater plate monel 400 special alloy nickel steel Introduction

Alloy 400 Corrosion Resistant Nickel ... - Sandmeyer Steel

General Properties. Alloy 400 (UNS N04400) is a nickel-copper alloy with excellent resistance to a wide range of corrosive environments. It is resistant to chloride stress corrosion cracking and has high strength and toughness over a wide range of temperatures.

MONEL alloy 400 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. MONEL alloy 400 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Nickel Alloy 400, Monel® 400 - Continental Steel & Tube ...

The Monel 400 alloy has many important properties that make it an attractive option for areas where corrosion resistance is of the highest priority. Whether it comes in (Hot Rolled Plate, Cold Rolled Sheet, Cold Rolled Strip) pipes, tubes, wires, or bars, its unique properties make it a staple of marine, chemical, and numerous other applications.

Nickel Alloy Plates Supplier, ASTM B162 Nickel 200 Sheet ...

nickel alloy 201 asme sb 162 plates stockholder, corrosion resistance super nickel alloy 200 plate exporter, monel 400 cold drawn plate stockist, inconel 600 alloy hot rolled plate, inconel 617 alloy plates, uns n02200 nickel alloy sheets exporter in india.[PDF]

alloy 400 - Special Metals Company

MONEL ® alloy 400 specialmetals MONEL® nickel-copper alloy 400 (UNS N04400/ W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high

400 / 2.4360 / nickel alloys / HEMPEL METALS

Main fields of application of alloy 400 2.4360 is a single-phase solid-solution nickel-copper alloy with excellent corrosion resistance to a wide range of media. Typical applications include: - propeller and pump shafts for seawater service - industrial heat exchangers - brine heaters and evaporator bodies in seawater desalination plants

Nickel Alloy Grades - Continental Steel & Tube Company

Controlled Expansion: Liquefied gas storage, Bimetallic strips for thermometers, LNG, TV Aperture masks, Composite wing molds, standards of length, measuring devices, laser components, bi-metal thermostat strip, thermostat rods, and tanks and piping for storing and transporting liquefied gases

monel 400 supplier, monel 400 price in india, alloy 400 ...

Monel 400 supplier, Buy Monel 400 material, Monel 400 Products, Check Monel 400 price in India, Alloy 400 material stockist in India. Check Monel 400 chemical composition, Monel 400 weight calculator, Monel 400 melting point, Monel 400 heat treatment

Monel 400 Plate - China Special Alloy Group Limited

Monel 400 is a nickel-copper alloy (about 67% Ni-23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength.

Monel 400 Plate Wholesale, Monel 400 Suppliers - Alibaba

Alibaba offers 1,209 monel 400 plate products. About 64% of these are nickel, 1% are dishes & plates. A wide variety of monel 400 plate options are available to you, such as nickel plate, nickel bar. You can also choose from not powder, is powder. As well as from free samples. There are 1,120 monel 400 plate suppliers, mainly located in Asia.

Special Steels

About Us. Welcome to Special Steel Middle East, a leading distributor and stockists of Tube, Pipe, Fittings, Flanges, Bar, Forgings, Sheet and Plate in Stainless,Duplex, Super Duplex,Alloy 625, Alloy 825 and Monel 400 and 500 etc...., Titanium and Low alloy.[PDF]

specialmetals

MONEL ® alloy K-500 specialmetals MONEL® alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and ...[PDF]

specialmetals

MONEL ® alloy K-500 specialmetals MONEL® alloy K-500 (UNS N05500/ W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and ...

Difference Between Inconel and Incoloy - hiteshsteel

Difference Between Inconel and Incoloy Inconel. Inconel is a family of austenitic nickel-chromium-based superalloys. Inconel Composition

Monel 400 Flanges, 400 Monel Alloy Lap Joint Flanges ...

Victor Steel is one of the Leading Manufacturer, Suppliers of Monel UNS N04400 Screwed / Threaded Flanges, B564 Monel 400 Reducing Flanges, 400 Monel Alloy Lap Joint Flanges in Mumbai,India.

Monel K500 Round Bar | Monel K-500 Plate - Michlin Metals

Monel K500 or Alloy 500 is in the same nickel based family as other Monel Alloys (Monel 400 and Monel R405). Alloy K-500 is a corrosion resistant alloy similar to Monel 400 but carries with it greater hardness and strength. In addition it's makeup is mostly that of Copper and Nickel.

Monel® Alloy 400 - American Special Metals, Corp.

Monel® Alloy nickel-copper alloy 400 (UNS N04400; W.Nr. 2.4360 and 2.4361) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments.

Monel Perforated Metal-Monel 400, Monel K500

Monel Perforated Metal is made of outstanding corrosion resistant alloy sheet, the alloy mainly to be Monel 400 and Monel K500. It is the best for use in marine, chemical, hydrocarbon processing and pipelines. Monel perforated metal is well known for its good strength, long service potential and outstanding corrosion resistance in marine ...

Nickel Alloy Sheet/Plate-Inconel, Monel, Hastelloy ...

The alloy plate’s width can reach 1500mm while the length can reach 3000mm. The alloy sheet’s single length weight can reach 300Kg. Our best advantaged alloy sheet products are: Nickel sheet, Inconel 600 sheet, Inconel 625 sheet, low expansion alloys sheet and soft magnetic alloy sheets.

Alloy 400 - Nickel Alloys from NeoNickel

About Alloy 400. Alloy 400 from NeoNickel has superb corrosion resistance, particularly in neutral and alkaline salts. It is also one of a limited number of alloys that can be used in conjunction with hydrofluoric acid and fluorine. With high nickel content, this alloy is …

Nickel Alloy Seamless, Welded Tubing | US Metals

Incoloy®, Alloy 20®, Monel® 400, Inconel®, Nickel 200, Nickel 201 - Heater Tubes U.S. Metals is a Premier Worldwide Supplier for All Your Nickel Seamless &Welded Tube Needs. Our Nickel Tube inventory is unsurpassed and is considered one of the most extensive stainless steel inventories in …

Nickel and High Temp Alloy Sheet On Continental Steel ...

Browse Nickel and High Temp Alloy Sheet in the Continental Steel & Tube Co. catalog including Incoloy® 800HT Sheet,Inconel® 600 Sheet,Monel® 400 Sheet,Nickel 200 Sheet,Nicrofer 59 Sheet,Inconel® C-276 Sheet,Incoloy® 825 Sheet,Inconel&

Monel Plate, Monel Plate Suppliers and Manufacturers at ...

About 64% of these are nickel, 1% are dishes & plates. A wide variety of monel plate options are available to you, such as nickel plate, nickel bar. ... China suppliers UNS N04400/W.Nr.2.4360 sheet /12mm thick nickel alloy monel 400 plate price . US $28.0-28.0 ... Monel Grade 400 Plate For Oil & Gas | Monel 400 Stainless Steel Sheet Price ...[PDF]

Specification Sheet: Alloy 400/400AR - Sandmeyer Steel

Specification Sheet: Alloy 400/400AR (UNS N04400) / W.Nr. 2.4360 and 2.4361 ... not as high as 304 stainless steel. Machining Alloy 400 can be machined at standard rates with conventional machine tools. ... Corrosion of Nickel 200 and MONEL Alloy 400 in hydrochloric acid solutions at 86°F (30°C)

Monel Products Grade 400 and Grade 500 - stebersteel.net

MONEL 400 Monel 400, Nickelvac 400, Nicorros 400 Monel 400 is a nickel-copper alloy (about 23% Cu–67% Ni ) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working.

Monel 400 Wire and Bar - Heanjia Super Metals

About Monel 400. Industrial Nomenclatures: Nickelvac 400, Nicorros 400, Nickel 400, Specialty Steel, UNS N04400 Monel 400 Wire, Bar and Plate. Monel 400 (Ni 67%) is made of a Nickel-Copper alloy that offers outstanding corrosion resistance in seawater.Monel 400 better withstands oxidation attack as compare to other copper based alloys and significantly prevents attack by sulfuric acid ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.