Tel: +86-371-86151827

astm a285 gr c steel sheets supplier steels

Steel grade:astm a285 gr c steel sheets supplier steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a285 gr c steel sheets supplier steels Introduction

ASTM A285 Grade C steel plate Carbon Equivalent steel ...

A285 Grade C steel plate is normally supplied the as-rolled condition.ASTM A285 Grade C steel plate may be ordered normalized or stress relieved,or both.As ASTM A285 Grade C steel plate doesn’t promote high tensile strength,it is used commonly in the fabrication of storage tanks and low pressure temperature controlled vessels.. ASTM A285 Grade C steel plate is found throughout industry in a ...

ASTM A285 and ASTM A283 Steel Plate ... - steels-supplier

ASTM A285 Carbon Steel Plate ASTM A285 Steel Introduction: ASTM A285 is a type of ordinary carbon steel intended for fusion-welded pressure vessel equipments as boiler, storage tank, heat exchangers, etc. With 3 steel grades (Grade A, Grade

ASTM A285 - SSAB high-strength steel - sheet, plate, coil ...

ASTM A285. The ASTM A285 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength intended for fusion-welded pressure vessels. Three grades having different strength levels are available in thicknesses up to 2", inclusively.

ASTM A285 Grade C Steel Sheet/Plate Suppliers, Buy A285 …

steelplates.in› Pressure Vessel Steel Plate› ASTM A285If you are interested in purchasing ASTM A285 Grade C steel plates, or have any queries, please feel free to email us on [email protected] or call us on +919892451458. Metline is a specialized supplier of ASTM A285 Grade C steel sheets and plates. We can offer A285 Grade C pressure vessel steel plates in a variety of thickness and sizes at ...

ASTM A285 Grade C supplier steel,ASTM ... - ice-steels

ASTM A285 Grade C steel is intended for use in standard tanks and boilers rather than high pressurised vessels due to the steels lower yield strength. ASTM A285 Grade C is supplied throughout the oil gas and petrochemical industry, Katalor hold this material in stock.

ASTM A285 Grade B steel plate ... - steel-plate-sheet

ASTM A285 Grade B steel plate is intended for use in standard tanks and boilers rather than high pressurised vessels due to its lower yield strength. With good forming and welding characteristics, ASTM A285 Grade B steel plate is supplied throughout the oil gas and petrochemical industry.

ASTM A 285/A283 Grade C Sheets and Plates, A285 Gr.C ...

Rexton Steel & Alloys manufacturer, trades and supplies high quality ASTM A285 Grade C plates, A285 Gr.C Boilers plates, ASTM A 285/A283 Grade C Sheets and Plates, ASME A 285 / A283 Grade C Sheets and Plates Pressure Vessel Steel Plate worldwide from Mumbai, India.Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical

ASTM A285 Grade C Carbon Steel Pressure Vessel and Boiler ...

Champak steel is a Stockholders and Suppliers of ASME SA 285 Gr C Plates, A285 Grade C Carbon Steel Plate, ASTM A285 Grade C pressure vessels Plates, SA285 Gr.C Boiler Steel Plate, A285 Grade C Welded Steel Plates

Astm A285 Grade C Steel Plate, Astm A285 Grade C Steel ...

Alibaba offers 115 astm a285 grade c steel plate products. About 32% of these are steel sheets. A wide variety of astm a285 grade c steel plate options are available to you, such as free samples.

ASTM A285 / A285M - 17 Standard Specification for Pressure ...

A285 / A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength pressure vessels~ welded steel plates~ welded steel sheets~ welded steel …

ASTM A285 Grade C supplier steel,ASTM ... - ice-steels

ASTM A285 Grade C steel is intended for use in standard tanks and boilers rather than high pressurised vessels due to the steels lower yield strength. ASTM A285 Grade C is supplied throughout the oil gas and petrochemical industry, Katalor hold this material in stock.

ASTM A285 GR C Steel Plate-GNEE GROUP Discount Steel Sheet ...

Product Introduction. A285 Gr C Boiler & pressure vessel steel plates,also named as pressurevessel steel plates which including carbon steel and alloy steel for High or intermediate and low temperature services.Main steel grades in boiler steel plates supplied by Xinsteel were approved by Germany’s TUV and UK’s Lloyd’s Register.. Our boiler steel plates mainly used in b oiler steel ...

ASTM A285-C, Grade A285-C, A285-C steel - BEBON STEEL

ASTM A285-C steel is a kind of material for boiler and pressure vessel steel.So, ASTM A285-C steel is used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids. ASTM A285-C steel is widely applied to Petroleum, Chemical Factory and the Boilers domains. It is also made the Reactor, Heat Exchange, Separator, Spherical Tank, the Tank of oil gas, Nuclear reactor ...

ASTM A 285/A283 Grade C Sheets and Plates, A285 Gr.C ...

Rexton Steel & Alloys manufacturer, trades and supplies high quality ASTM A285 Grade C plates, A285 Gr.C Boilers plates, ASTM A 285/A283 Grade C Sheets and Plates, ASME A 285 / A283 Grade C Sheets and Plates Pressure Vessel Steel Plate worldwide from Mumbai, India.

CHEMTECH 】ASTM A285 GRADE A - B - C PVQ STEEL …

The following specifications cover Carbon Steels A285 Grade C ASTM A285 Grade C * UNS K02801. ASTM A285 Steel plates are intended for fusion-welded pressure vessels. Plates under this specification are available in three grades having different strength levels as detailed below:

Stainless Steel, Carbon Steel, Alloy Steel, High Nickel ...

A285 / A283 Grade C Sheets & Plates. A285 / A283 Grade C Sheets & Plates, ASME SA285/SA283 Gr.C Pressure Vessel Steel Plate Exporters, Suppliers and Stockists in India. We products these ASTM A 285 / A283 Grade C products that are effective at low pressure conditions, but can also be used in a variety of conditions.

Astm A285 Grade C Steel Plate, Astm A285 Grade C Steel ...

Alibaba offers 115 astm a285 grade c steel plate products. About 32% of these are steel sheets. A wide variety of astm a285 grade c steel plate options are available to you, such as free samples.

ASTM A285 - SSAB

ASTM A285. The ASTM A285 specification is the Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength intended for fusion-welded pressure vessels. Three grades having different strength levels are available in thicknesses up to 2", inclusively.

Manufacturer of Carbon steel ASTM A568 sheets & Plates ...

Red Earth Steel manufacture and export Carbon Steel Sheets & Plates in these availble gradesASTM A568/A36/ ASTM A285 Gr. B with high quality. We also manufacture and export Carbon Steel Sheets Plates in other materials also like Nickel Alloys, Stainless Steel , Mild Steel, Alloy Steel etc.

Mild Steel A285 GR.C Plates Supplier, GR.C MS A285 Cold ...

Mild Steel A285 GR.C Plates Manufacturer. Marc Steel is a known manufacturer and trader of ASTM A285 GR.C Plates, which has some excellent features to offer such as longer service life, Mild steel body, resistance against corrosion and more.Our customers can avail from us supreme-grade ASTM A285 GR.C Sheets.Mild Steel ASTM A285 GR.C Plates We are engaged in the offering ASTM A285 GR.C …

P235GH Steel – High Temperature & Pressure Application

P235GH is the designation alloy in the European standard, also referred to as A285 grade C steel in ASTM A285 / A285M standard. Many manufacturers and traders who sell P235GH also claim to be compliant with specifications of ASME/ASTM material A516 grade 60 steel. But buyers should check in detail with material specifications. Learn about ...

ASTM A285 Gr.C Carbon Steel Plate manufacturers -Triton ...

ASTM A285 Gr.C Carbon Steel Plate Factory Triton Alloys Supplies ASTM A285 Gr.C Carbon Steel Plate, Hot Rolled, 6000MM X 1500MM X 6MM, Painting Treatment.

Astm A285 Gr B Steel Plate - indiamart

Aesteiron Steels Pvt Ltd is one of the leading manufacturers, suppliers of ASTM A285 GrB Steel Plate. Grades ASTM A204 Gr A Steel Plate ASTM A204 Gr B Steel Plate ASTM A204 Gr C Steel Plate ASTM A283 Gr A Steel Plate ASTM A283 Gr B Steel Plate

ASTM Plates & Sheets - ASTM A387 Gr 12 Steel Plate ...

Manufacturer of ASTM Plates & Sheets - ASTM A387 Gr 12 Steel Plate, ASTM A455 Steel Plate, ASTM A283 Gr A Steel Plate and ASTM A36 Plate offered by Aesteiron Steels LLP, Mumbai, Maharashtra.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.