Tel: +86-371-86151827

s235jr steel plate steel pipe

Steel grade:s235jr steel plate steel pipe

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s235jr steel plate steel pipe Introduction

S235JR - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S235JR can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

what materials of S235JR? - "One-stop" shopping steel ...

S235JR carbon steel plate is the European standard of non-alloy structural steels, equivalent to GB Q235B steel paltes, namely carbon structural steels with …

S235JR,S235JR STEEL,S235JR PLATE - Mild steel plate ...

EN 10025-2 S235JR common carbon structural steel plate are mainly used to produce structural parts of the bolted and welded steel in dustrial area.The minimum yield strength of carbon steel plate S235JR shall be 235 Mpa for nominal thickness,and tensile strength of structural steel plate S235JR shall be within 360-510Mpa.1Mpa is equal to 1 N/mm2.Now Xinsteel can offer S235JR carbon steel plate ...

1.0038 Steel S235JR Material Equivalent, Composition ...

S235JR material or 1.0038 steel is an European standard hot rolled non-alloy structural steel grade. It has good plasticity, toughness and weldability, certain strength and good cold bending properties. For specification and data sheet, please see the following tables. The designation of S235JR steel is as follow: “S” is short for ...

S235JR Steel Plate - Landee

China S235JR Carbon Steel Square Pipe Factory Landee Offers S235JR Carbon Steel Square Pipe, Width 80mm X 60mm, Length 6000mm, Wall Thickness 2mm. S235JR Carbon Steel Plate, 1500mm X 6000mm X 10mm. Request a quote LD 16 SP 03. China S235JR Carbon Steel Plate Manufacturer Landee Supplies S235JR Carbon Steel Plate, Width 1500mm, Length 6000mm ...

S235JR Steel Plate

S235JR Plate Stockists. Our S235JR Steel Plate are used in marine engineering, chemical processing, hydro-carbon processing, heat exchangers, valves manufacturing,pumps manufacturing,petrochemical plants,nuclear power projects,Oil & Gas equipment manufacturing and shipped to UAE, OMAN, SAUDI ARABIA, QATAR, KUWAIT, TURKEY & Singapore,we procure ...

S235JR Chemical composition , S235JR - BEBON steel

BEBON is specialized in supplying EN10025-2 steel plate in S235JR. Bebon International is a professional S235JR Chemical composition , S235JR steel exporter and a steel Stockist in china. We keep more than 1000 tons S235JR Chemical composition , S235JR steel in stock every month.

EN10219 Grade S235JR Steel Tube OD 323mm DRL Pipe

HYSP is professional in EN10219 Grade S235JR Steel Tube OD 323mm DRL Pipe manufacturer and exporting for years. Our S235JR pipe are used as structure pipes.

EN 10025 S275JR steel,EN 10025 S275JR steel steel plate,EN ...

S275JR steel plate/sheet, EN 10025 S275JR steel plate/sheet, S275JR steel plate/sheet supplier/Chinese supplier, S275JR steel plate/sheet price, S275JR steel plate/sheet mechanical property.. EN 10025 S275JR steel equivalent grade: S275JR steel plate/sheet is in EN 10025 standard, the material number is 1.0044.

S235JR - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S235JR can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

EN 10025 S275JR steel,EN 10025 S275JR steel steel plate…

S275JR steel plate/sheet, EN 10025 S275JR steel plate/sheet, S275JR steel plate/sheet supplier/Chinese supplier, S275JR steel plate/sheet price, S275JR steel plate/sheet mechanical property.. EN 10025 S275JR steel equivalent grade: S275JR steel plate/sheet is in EN 10025 standard, the material number is 1.0044.

S235JR Equivalent to ASTM A36 Mechanical Properties and ...

S235JR Equivalent to ASTM A36 Mechanical Properties and Common Applications . Structural steel is a standard construction material, made from specific grades of steel and formed in a range of industry standard cross-sectional shapes (or ‘Sections’).

supplier of s235jr mild steel tubing,A36,Q235B,Q345B steel ...

steel plate,steel pipe,steel coil - kouhpayesteelSeamless Tube, Seamless Steel Tube, Stainless Pipe manufacturer / supplier in China, offering Rhs/Shs Welded Square/Rectangular Hollow Section Steel Pipe, Q235 (S235JR) Mild Steel Angle Bars (CZ-A09), GB Standard Mild Steel Angle Bar and so …

S235JR STEEL GRADE - Co., Ltd. - htsteelmill

The tables below show the mechanical properties of grade S235JR : Minimum yield strength Reh MPa Tensile strength Rm MPa Minimum elongation – A Lo = 5,65 * √So (%) Notch impact test Steel grade Nominal thickness mm Nominal thickness mm Nominal thickness mm Temperature Min. absorbed energy ≤16 >16 ≤40 >40 ≤63 >63 ≤80 >80 ≤100 >100 ...

EN 10025-2 S235JR hot-rolled structural steel | Pipe ...

S235JR steel plate is one mainly of Carbon and low alloy steel, S235JR steel plate is a type of steel sheet under EN standard which is used to build ship, bridge, belongs to high strength sheet.

steel-plate-sheet - A283GRC,A36,SM490,A572GR50,S235JR …

A283GRC,A36,SM490,A572GR50,S235JR,S275JR,S355JR,A588,S355J2WP,A514,A517,S420N,AH36,DH32,EH36,EH40,FH32 steel plates supplier.If you need shipbuilding steel plate ...

S235JR ST37-2 E24-2 SS400 A283C A36 Steel plate,S235JR ...

S235JR steel is a type of steel sheet under EN standard which is used to build ship, bridge.A36 steel is carbon steel plate.S235JR is equivalent to DIN:St37-2,etc.If you need S235JR steel,ss400 ASTM A36 steel,please contact us.

S235JR Steel Grade, Mechanical Properties, Chemical ...

S235JR Steel Grade, Mechanical Properties, Chemical Composition, Grade Equivalent Standard: EN 10025-2:2004, European standard for hot-rolled structural steel. Part 2 - Technical delivery conditions for non-alloy structural steels.

S235JR Mild Steel - Special steel china supplier-OTAI ...

S235jr steel is a mild steel, its carbon composition below 2%. So the S235JR Mild steel have very good welding performance. For S235JR, we supply the steel plate, steel round bar, steel hexagonal bar, flat bar, square bar and pipe. DIN EN S235JR Mild Steel is European standard of alloy structural steel, It is equivalent with the Chinese ...

S235jr Steel Equivalent, S235jr Steel Equivalent Suppliers ...

Alibaba offers 258 s235jr steel equivalent products. About 17% of these are steel pipes, 16% are steel sheets, and 3% are steel round bars. A wide variety of s235jr steel equivalent options are available to you, such as aisi, api, and astm.

"One-stop" shopping steel products in china. You can ...

You can purchase S235JR carbon steel plates, SA213 seamless steel pipes and stainless steel coils. One-stop shopping steel products in china.

China S235jr Mild Steel Plate - China S235jr Steel Plate ...

S235jr Steel Plate, S235jr Steel Sheet, S235j0 Steel Plate manufacturer / supplier in China, offering S235jr Mild Steel Plate, ASTM A192/A179/A178/A210 Seamless Steel Pipe / Bolier Pipe, ASTM B265 Gr1, Gr2 Titanium Sheet / ASTM B265 Gr1, Gr2, Gr3 Titanium Plate and so on.

Q235B,Q235B PLATE,Q235B STEEL

Q235B is the most common used among carbon steel.It is equal to steel grades ASTM A36,JIS G3101 SS400,EN 10025-2 S235JR.Xinsteel stocks carbon steel Q235B in coils shape and plate shape at port warehouses with many sizes.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.