Tel: +86-371-86151827

317 stainless steel sheet or plate sus301

Steel grade:317 stainless steel sheet or plate sus301

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

317 stainless steel sheet or plate sus301 Introduction

Is Grade 317 Stainless Steel Worth the Cost Over 316 & 304?

Grade 317 stainless steel is more expensive than grade 304 or 316 SS, but also has a higher resistance to some corrosives as well. ... Is Grade 317 Stainless Steel Worth the Cost Over 316 & 304? ... Stainless Steel Properties Reference. A cheat sheet comparing key characteristics of commonly used stainless steel alloys.

Stainless Steel 317 Sheets Manufacturers, SS 317L Plates ...

Stainless Steel UNS S31700 / S31703 Sheets & Plates, SS Sheets & Plates, Stainless Steel Sheets & Plates Supplier ASME SA 240 Stainless Steel DIN 1.4449 / 1.4438 Sheets & Plates Supplier . We provide an extensive range of Stainless Steel 317-317L Sheets Plates that is designed using pure grade raw material using modern machinery & tool. These ...

Alloy 317L Austenitic Stainless Steel Plate - Sandmeyer Steel

General Properties. Alloy 317L (UNS S31703) is a lowcarbon corrosion resistant austenitic chromium-nickel-molybdenum stainless steel. The high levels of these elements assure the alloy has superior chloride pitting and general corrosion resistance to the conventional 304/304L and 316/316L grades.

SUS301 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. SUS301 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

SS 317L Plate suppliers | SA240 gr317L | A240 TP317L ...

SS UNS S31703 Plate stockist in India, Stockholder of ASTM A240 317L SS Plate, SAIL 317L Stainless Steel Plate stockholder in India, AISI 317L Plate BA Surface Finish wholesaler in India, 317L Stainless Steel Plate 2R (BA) Finish importers in India, SS 317L Hot Rolled Plates, SS 317L Plate Price in Mumbai, Best Price of SS 317L Coil, Dealer & Distributor of 317L SS Perforated Plate

SA240 317 stainless steel plate,SA240 TP317 stainless ...

Gangsteel is specialized in supplying ASME SA240 steel plate in SA240 317 Stainless steel and SA240 TP317 Stainless sheet. Our BBN Steel have min 600Tons stock size for each size stainless steel. We also have cutting factory which could cut

317 stainless steel sheet plate - alibaba

Alibaba offers 1,848 317 stainless steel sheet plate products. About 79% of these are stainless steel sheets, 13% are steel sheets. A wide variety of 317 stainless steel sheet plate options are available to you, such as aisi, astm, and jis.

317L - Rolled Alloys, Inc.

317L is a molybdenum containing austenitic stainless steel, with improved corrosion resistance over 304/304L and 316/316L stainless steel. The increased levels of chromium, nickel and molybdenum over 316L stainless steel improve chloride pitting resistance and general corrosion.

Stainless Steel 317 Sheets Manufacturers, SS 317L Plates ...

Stainless Steel UNS S31700 / S31703 Sheets & Plates, SS Sheets & Plates, Stainless Steel Sheets & Plates Supplier ASME SA 240 Stainless Steel DIN 1.4449 / 1.4438 Sheets & Plates Supplier . We provide an extensive range of Stainless Steel 317-317L Sheets Plates that is designed using pure grade raw material using modern machinery & tool. These ...

SS 317L Plate suppliers | SA240 gr317L | A240 TP317L ...

SS UNS S31703 Plate stockist in India, Stockholder of ASTM A240 317L SS Plate, SAIL 317L Stainless Steel Plate stockholder in India, AISI 317L Plate BA Surface Finish wholesaler in India, 317L Stainless Steel Plate 2R (BA) Finish importers in India, SS 317L Hot Rolled Plates, SS 317L Plate Price in Mumbai, Best Price of SS 317L Coil, Dealer & Distributor of 317L SS Perforated Plate

Is Grade 317 Stainless Steel Worth the Cost Over 316 & 304?

Grade 317 stainless steel is more expensive than grade 304 or 316 SS, but also has a higher resistance to some corrosives as well. ... Is Grade 317 Stainless Steel Worth the Cost Over 316 & 304? ... Stainless Steel Properties Reference. A cheat sheet comparing key characteristics of commonly used stainless steel alloys.

317 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. 317 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

317 Stainless Steel 317L Round-Bar-Supplier-Sheet-Pipe

317 Stainless Steel is an austenitic stainless steel which contains molybdenum. This grade has improved corrosion resistance over 304/304L and 316/316L. 317/317L By controlling the addition of nitrogen, 317L commonly meets the properties of the straight grade 317 …

317 Stainless Steel Sheet - tjtgwy.en.made-in-china

317 Stainless Steel Sheet, Sus317 Stainless Steel Sheet, Tp317 Stainless Steel Sheet manufacturer / supplier in China, offering 317 Stainless Steel Sheet, Brass Strip/ Bronze Strip, ASTM Brass Tube / Brass Pipe and so on.

Stainless Steel 317 / Alloy 317 / Alloy 317L

Alloy 317 and 317L are molybdenum-bearing austenitic stainless steels. Due to the molybdenum content of 3-4% 317 and 317L are more resistant to general corrosion and pitting/crevice corrosion than type 304.317 and 317L are used in the Food, Pharmaceutical, Marine and Architecture industries.

Stainless steel 304, 317, SS 317L, 904L Flanges, fasteners ...

Stainless Steel 304 flanges manufacturer, stainless steel 317/317L fastener supplier, SS 904L buttweld pipe fittings distributor, stainless steel 316/316L forged fittings exporter, SS 321 stainless steel sheets and plates, stainless steel 304 round bar

317L Stainless Steel | Penn Stainless Products

General Properties. Alloy 317L is a molybdenum containing, low carbon austenitic stainless steel with increased additions of chromium, nickel, and molybdenum for better corrosion resistance and increased resistance to chemical attack for sulfurous, acetic, formic, citric, and tartaric acids.

Wear Resistant Hot Rolled 317/317L Stainless Steel Sheet

Stainless Steel Sheet, Stainless Steel Plate, Steel Plate manufacturer / supplier in China, offering Wear Resistant Hot Rolled 317/317L Stainless Steel Sheet, Alloy Construction Steel Bar in 4135 4140 34CrMo4 42CrMo4 with Good Quality, 6063 6060 Aluminum Extrusion for LED Head Lights and so on.

304/304L|316/316L - ASTM A240 Stainless Steel Plate ...

ASTM A240 steel plate covers Austenitic Steels, Ferritic steels and Martensitic Steels. 304/340L, 316/316L is common stainless steel grades for many industries, ANSON can provide you best ASTM A240 steel plate for your project.

JIS G4304 SUS 445J1 Stainless Steel Plate | SUS445J1 ...

jis g4304 stainless steel JIS G4304 SUS 445J1 Stainless Steel Plate | SUS445J1 SHEETS JIS G4304 standard specification for chromium and chromium-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications[PDF]

ATI 316™, ATI 316L™, ATI 317™, ATI 317L™

ATI 316™, ATI 316L™, ATI 317™, ATI 317L™ Stainless Steel: Austenitic ... ATI 317™ and ATI 317L™ stainless steels are available in the form of sheet, strip and plate to ASTM A240 and ASME SA-240 and other pertinent speci fications from ATI. Data are typical, are provided for informational purposes, and should not be construed as ...

China 3cr12 Stainless Steel Sheet Plate - China Stainless ...

3cr12 stainless steel sheet Stainless steel is a production which not easy rust, acid resistance and corrosion resistance, so it is widely used in light industry, heavy industry, daily necessities and the decoration industry. My company long-term supply stainless steel products.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.