Tel: +86-371-86151827

sus301 full hard cold rolled steel coil 0 150 45

Steel grade:sus301 full hard cold rolled steel coil 0 150 45

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sus301 full hard cold rolled steel coil 0 150 45 Introduction

301 Full Hard Tempered Stainless Steel Sheet & Coil - AMS …

301 Full Hard is an austenitic stainless steel which differs from other forms of 301 offered by United Performance Metals in that it has been cold rolled to its full hard condition. This increases the metal's attractiveness for forming and increases its fatigue life. In its full hard condition, type 301 has a tensile strength of 185,000 PSI minimum, and a minimum yield strength of 140,000 PSI.

301 Stainless Steel Full Hard Temper - Sheet & Coil AMS ...

precisionsteel› Stainless Steel› 301 Stainless SteelFull Hard Cold Rolled - Type 301 - (chrome-nickel) Stainless Steel permits cold working to the ideal combination of mechanical properties desired for springs. Its unique combination of hardness and toughness makes for better forming quality in this Full Hard Temper plus …

Full Hard 301 Stainless Steel Coil 3.0mm - Made-in-China

301 Stainless Steel Coil, Full Hard 301 Stainless Steel Coil, 301 Stainless Coil manufacturer / supplier in China, offering Full Hard 301 Stainless Steel Coil 3.0mm, 0.39mm 0.4mm 0.41mm 0.42mm 0.43mm 0.44mm 99.994% Pure Lead Foil for Laboratory, 99.994% Pure Lead Foil for Laboratory and so on.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Cold-Rolled Steel Sheets and Coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of ... Cold-Rolled Coil (Full Hard) Cold-Rolled Coil Hot Rolling Mill Continuous Annealing Line ... NSC340BH 201 347 44 58 0…

Stainless Steel 301 Full Hard (AMS 5519) sheet - Aircraft ...

The mechanical properties for the different tempers of 301 are obtained by cold working and not by heat treating. 301 Full Hard (AMS 5519) material has a miniumum tensile strength of 185ksi and is used in the fabrication of parts that require high strength and involves moderate drawing or forming.

Buy Sus301 Stainless Steel Sheet - w3s.in

301 Full Hard Tempered Stainless Steel Sheet & Coil - AMS … 301 Full Hard is an austenitic stainless steel which differs from other forms of 301 offered by United Performance Metals in that it has been cold rolled to its full hard condition. This increases the metal's attractiveness for forming and increases its …

301-1/2 Hard Tempered Stainless Steel Sheet & Coil - AMS …

301-1/2 Hard is an austenitic stainless steel that it has been cold rolled to its 1/2 hard condition. This makes it ideal for applications requiring both formability and tensile strength of 150,000 PSI and yield strength of 110,000 PSI.

Full Hard Steel, Full Hard Steel Suppliers and ...

A wide variety of full hard steel options are available to you, such as aisi, astm, and gb. You can also choose from structure pipe, fluid pipe. As well as from cold rolled, hot rolled, and erw. And whether full hard steel is bsi, ul, or iso. There are 18,699 full hard steel suppliers, mainly located in Asia.

Cold Rolled 1008/1010 Steel Physical & Chemical Properties

View the physical and chemical properties of the various cold rolled steel alloys we carry. Don't see something? Request a quick quote and we'll try to get it.[PDF]

301 STAINLESS STEEL - AK Steel Holding

of this stainless class, Type 304L Stainless Steel. A major difference is the high C content for this alloy, which can cause the weld heat-affected-zones to be susceptible to intergranular corrosion in certain environments. When a weld filler is needed, AWS E/ER 308 is most often specified. Type 301 Stainless Steel is well known in reference[PDF]

ALUMINIZED COIL AND SHEET COLD ROLLED COIL AND …

60 x 144 150 120 190 68 60 45 38 72 x 196 120 196 172 54 48 36 30 ... HOT ROLLED COIL AND SHEET STEEL General Hot rolled steel is rolled on a continuous strip mill, generally above 1600°F (870°C), to the desired thickness. The steel is supplied with either a stan- ... COLD ROLLED COIL General. TOLERANCES ...[PDF]

FLAT ROLLED PRODUCTS - ussteel

Cold Rolled Sheet Steel (continued) Other Quality and Grade/Chemistry Extras: Specified Hardness (Rb 15pt. Range, up to and including 1/4 Hard) 0.75 Full Hard Inquire 1/2 Hard 70-85 Rb 1.50 1/4 Hard 60-75 Rb 0.75 Cold Rolled Tack Plate 0.90 Restricted Chemistry Inquire …[PDF]

Contents

In 1958, we became the first Japanese producer of cold-rolled stainless steel sheets in coil at Shunan Works and since then we have helped to make stainless steel a material commonly used in the manufacturing of consumer durables both in Japan and overseas. Nisshin Steel has received wide acclaim as a supplier of cold-rolled sheets and strips and

Buy Sus301 Stainless Steel Sheet - w3s.in

301 Full Hard Tempered Stainless Steel Sheet & Coil - AMS … 301 Full Hard is an austenitic stainless steel which differs from other forms of 301 offered by United Performance Metals in that it has been cold rolled to its full hard condition. This increases the metal's attractiveness for forming and increases its …

Cold Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsAlliance Steel offers a variety of cold rolled steel products and value-added services to meet customer needs. Alliance Steel’s cold rolled steel service capabilities include slitting, shearing, blanking, leveling, degreasing and brushing and metallurgical support. Contact us today for information and availability.

Stainless Steel 301 Full Hard (AMS 5519) sheet - Aircraft ...

The mechanical properties for the different tempers of 301 are obtained by cold working and not by heat treating. 301 Full Hard (AMS 5519) material has a miniumum tensile strength of 185ksi and is used in the fabrication of parts that require high strength and involves moderate drawing or forming.

Cold Rolled Coils Grades of SPCC, SPCCT, SPCD, SPCE, SPCF ...

Cold Rolled Steel Sheets & Coils grade of SPCC is the Japanese steel grade, from JIS G3141. Standard name: common & general use of cold-rolled carbon steel sheet and strip. The same category in the standard grades is SPCD, SPCE, SPCF, SPCG.

Cold Rolled Stainless Steel Coil For Sale

Cold rolled stainless steel plate is a steel plate that further thins the No.1 steel plate to a target thickness at room temperature. Compared with the hot rolled steel plate, the cold rolled steel plate is more accurate, smooth and beautiful, and also has a variety of superior mechanical properties, especially in processing performance.

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Available for use in a wide variety of applications, Outokumpu cold rolled coil, strip and sheet products are put to work across all industries and markets. Heat- and corrosion-resistant, lightweight yet strong, durable and fully recyclable, stainless steel coil, strip and sheet is exceptionally versatile.

Cold Rolled Steel Suppliers - ThomasNet

thomasnet› Supplier DiscoverySteel: Cold Rolled manufacturers, service companies and distributors are listed in this trusted and comprehensive vertical portal. The comprehensive directory provides access to full contact and ability information for sourcing professionals, engineers and researchers wishing to get information on Steel: Cold Rolled.

Cold Rolled Steel – Berlin Metals

berlinmetals› ProductsThe first step in manufacturing Cold Rolled Sheet Products involves cold reducing coils of hot-rolled, pickled product to a thinner thickness. The primary feature of cold reduction is to reduce the thickness of hot-rolled coils into thinner thicknesses that are not generally attainable in the hot rolled state.

Cold Rolled 1008/1010 Steel | Mead Metals in Minnesota

Mead Metals is an industry-leading provider of cold rolled carbon steel. We keep 1008 steel and 1010 steel available in thicknesses from 0.005 to 0.134, in commercial quality up through full hard tempers.[PDF]

Stainless Steel - Yieh Corp.

S30100 14 301 SUS301 301S21 1.431 X12CrNi177 Z11CN17-08 142331 X12CrNi1707 10Cr17Ni7 301 ... 20.0% Steel Grade MECHANICAL PROPERTY ASTM Specification Specifica tion BENDABILITY. Stainless Steel 1 - 9 Tensile Stress Proof Stress ... Stainless Steel Hot Rolled No.1 Coil

Search our Multi-Supplier Inventory of Coil on Steel Spider

Coil buyers can search through the database of offerings of multiple suppliers to find the coil they are looking for. The supplier's contact information is provided so a buyer can contact the supplier directly. All coil listed is subject to prior sale.

Tata Steel - Automotive - Cold-rolled steel

tatasteeleurope› Home› Products› AutomotiveCold-rolled, uncoated steel for cold forming and deep drawing is available in a range of grades. Each grade is designed for a range of possible applications: from outer panels like roofs to structural reinforcements like seat cross members – allowing you to pick the best steel for your product.

Cold Rolled Steel - Produces and supplies coil steel ...

Cold Rolled Steel. Cold Rolled Steel. Produced on our rolling mills from high quality hot rolled coil steel supplied by both domestic and international sources. Finished product is rolled on our Z-mill or one of our 4-High Reversing Mills where it is processed to our …

302 Stainless Steel UNS S30200 | Ulbrich

302 Stainless Steel UNS S30200 Download Datasheet. Strip, Coil, Foil & Wire, AMS 5515 & AMS 5516 (Annealed), AMS 5903 (1/4 Hard), AMS 5904 (1/2 Hard), AMS 5905 (3/4 Hard), AMS 5906 (Full Hard) ... #BA- Bright annealed cold rolled and bright annealed #CBA- Course bright annealed cold rolled matte finish and bright anneal #2 - Cold Rolled # 2BA ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.