Tel: +86-371-86151827

sae 1045 data sheet

Steel grade:sae 1045 data sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sae 1045 data sheet Introduction

1045 Datasheet, PDF - Alldatasheet

1045 Datasheet, 1045 PDF, 1045 Data sheet, 1045 manual, 1045 pdf, 1045, datenblatt, Electronics 1045, alldatasheet, free, datasheet, Datasheets, data sheet, datas ...

SAE 1045 - steel-grades

21 rows· This page provides SAE 1045 datasheet download, these include SAE 1045 mechanical …GRADESTANDARDCOUNTRYAPPLICATIONY1Cr18Ni9GBChinaImprove the machinability, ablation resistance. Suita…1Cr18Ni9GBChinaHigh strength after cold forming, but elongation tha…1Cr18Mn10Ni5Mo3NGBChinaOf urea with good corrosion resistance, can produc…1Cr17Ni7GBChinaHigh strength after cold forming. Used in railway veh…See all 21 rows on steel-grades

SAE 1045 - steel-grades

21 rows· This page provides SAE 1045 datasheet, SAE 1045 mechanical properties, chemical …GRADESTANDARDCOUNTRYAPPLICATIONY1Cr18Ni9GBChinaImprove the machinability, ablation resistance. Suita…1Cr18Ni9GBChinaHigh strength after cold forming, but elongation tha…1Cr18Mn10Ni5Mo3NGBChinaOf urea with good corrosion resistance, can produc…1Cr17Ni7GBChinaHigh strength after cold forming. Used in railway veh…See all 21 rows on steel-grades[PDF]

Atlas 1045 Medium Tensile Carbon Steel Bar 1045

Medium Tensile Carbon Steel Bar 1045 Applications of Atlas 1045 Grade 1045 is used in general engineering applications. This grade is used in engineering applications where better strength that that offered by either M1020 or M1030 is a requirement. Typical applications include hydraulic rams, shafts and medium to higher strength threaded ...

AISI 1045 Steel | Double Eagle Alloys

doubleeaglealloys› Products› Carbon Alloys/ProductsDownload Data Sheet Description AISI 1045 is a medium carbon steel containing approximately 0.45% carbon that can be hardened by heat treatment to a maximum surface hardness of approximately Rockwell C 54-60 after flame or induction hardening.[PDF]

1045 MEDIUM TENSILE CARBON STEEL BAR - …

1045 MEDIUM TENSILE CARBON STEEL BAR 1045 is a medium tensile low hardenability carbon steel generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 - 700 Mpa and Brinell hardness range 170 - 210 in either

Carbon steel SAE 1045 [SubsTech]

carbon_steel_sae_1045.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons …

AISI 1045 Steel, cold drawn, high temperature stress ...

AISI 1045 Steel, cold drawn, high temperature stress relieved, 50-75 mm (2-3 in) round ... Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units.

SAE-AISI 1045 (S45C, G10450) Carbon Steel :: MakeItFrom

SAE-AISI 1045 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1045 is the designation in both the SAE and AISI systems for this material. G10450 is the UNS number. It can have a moderately high tensile strength among the …

Carbon steel SAE 1045 [SubsTech]

carbon_steel_sae_1045.txt · Last modified: 2012/06/02 by dmitri_kopeliovich Except where otherwise noted, this work is licensed under a Creative Commons …

AISI 1045 Steel, cold drawn, high temperature stress ...

Property Data; This page displays only the text of a material data sheet. To see MatWeb's complete data sheet for this material (including material property data, metal compositions, material suppliers, etc), please click the button below.

AISI 1045 Steel | Double Eagle Alloys

doubleeaglealloys› Products› Carbon Alloys/ProductsDownload Data Sheet Description AISI 1045 is a medium carbon steel containing approximately 0.45% carbon that can be hardened by heat treatment to a maximum surface hardness of approximately Rockwell C 54-60 after flame or induction hardening.

AISI 1045 Steel, cold drawn, high temperature stress ...

AISI 1045 Steel, cold drawn, high temperature stress relieved, 50-75 mm (2-3 in) round ... Users requiring more precise data for scientific or engineering calculations can click on the property value to see the original value as well as raw conversions to equivalent units.[PDF]

MEDIUM TENSILE STEEL AISI 1045 - S&T Stainless

MEDIUM TENSILE STEEL – AISI 1045 AISI 1045 Medium Carbon, Medium Tensile Steel, supplied black as rolled, black as forged or normalised and bright drawn or smooth turned, offering good strength, toughness and wear resistance. Will through harden in sections up to 63mm – with a tensile strength of 620 - 850 MPa. TYPICAL APPLICATIONS:

1045 Carbon Steel Bar - Interlloy

1045 Medium Tensile Carbon Steel Bar: 1045 is a medium tensile low hardenability carbon steel generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 - 700 Mpa and Brinell hardness range 170 - 210 in either condition.

AISI 1045 Carbon Steel (UNS G10450) - AZoM

AISI 1045 can be formed into turned, ground and polished bars that can be machined unsymmetrically with limited distortion. The following sections will discuss in detail about AISI 1045 carbon steel. Chemical Composition. The chemical composition of AISI 1045 carbon steel …

Speedy Metals - 1045 Plate Steel Sheet and Plate

1045 Steel Sheet and Plate. Typical Applications. 1045 hot roll plate has a wide variety of applications. It is used for machinery parts, excellent for die forging and hot upsetting, gears, bolster plates, base plates, wear plates, brake dies etc. 1045 hot roll plate can be flame cut to various shapes for a multitude of uses, both in the hardened or annealed condition.

SAE 1045 | Products & Suppliers | Engineering360

globalspec› PRODUCTS & SERVICESFind SAE 1045 related suppliers, manufacturers, products and specifications on GlobalSpec - a trusted source of SAE 1045 information. ... SAE 0030 (UNS J 03010) and AISI 1020. In addition, there are data obtained in vacuum for Supplier Catalog Go To Website ... and the microhardness distribution across the weld interface of direct-drive ...

AISI 1045 Carbon Steel - AISI 1045 Medium Carbon Steel ...

C1045 is a medium carbon, medium tensile steel supplied as forged or normalized. This steel shows reasonable strength and toughness. C1045 will through harden to 2.5” (63mm) with a tensile strength of 66-120 Ksi (620-850 MPa). Contact All Metals & Forge Group for your forging needs.

1045 | CARBON | In Stock | Castle Metals Site

Carbon 1045 in bar SPECIFICATIONS: GRADE CARBON 1045, AISI 1045, UNS G10450 Castle Metals distributes a wide range of Alloy 1045 in rounds, squares, and hexs from our distribution centers in the U.S., Canada, Mexico, Shanghai, Singapore, France, and the U.K. When customers confer with us on 1045, sometimes they say they are stressed by supporting growth.[PDF]

CARBON STEEL - 1045 - Global Metals

Australia AS 1442-2007 1045 Germany W.Nr 1.1191 CK45 Great Britain BS970 – Part 3 – 1991 080A47 BS970 Part 1 – 1972 080M46 USA AISI C1045 ASTM A29/A29M – 91 1045 SAE 1045 UNS G 10450 Japan JIS G 4051 S45C DESCRIPTION: 1045 is a medium carbon, fully killed steel supplied in the as rolled condition or (optional) normalised.[PDF]

AISI CHEMICAL COMPOSITION LIMITS - DEL METALS

5 | P a g e AISI CHEMICAL COMPOSITION LIMITS: STANDARD BARS, BLOOMS, BILLETS, SLABS Chemical Composition AISI Number C Mn P Max. S Max. 1330 0.28/0.33 1.60/1.90 0.035 0.04

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.