Tel: +86-371-86151827

uns s30408 stainless steel sheet plate

Steel grade:uns s30408 stainless steel sheet plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

uns s30408 stainless steel sheet plate Introduction

China GBT S30408 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. S30408 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

304L Stainless Steel Sheets, Plates and Coil Factory ...

Stainless Steel 304L Sheets, Plates, Coils. Stainless Inox is one of the leading Supplier, Exporter and Stockholders of Stainless Steel 304L Sheets, Plates and Coils in Dubai, UAE that is being made up from High Quality of Standard Raw Materials.

Thickness 3.0 - 16.0mm ASTM / ASME UNS S30408 Stainless ...

Quality Stainless Steel Plates manufacturers & exporter - buy Thickness 3.0 - 16.0mm ASTM / ASME UNS S30408 Stainless Steel Plate Sheet for Pressure Vessel from China manufacturer.

Buy Aisi S30408 Stainless Steel Sheet - w3s.in

S30408 / 304 Stainless Steel Sheet - Buy S30408 Stainless ...Tianjin Yichengtong Steel Trade Co., Ltd is a comprehensive company, which is founded in 2008, Specilized in stainless steel plate, stainless steel sheet, stainless steel coils and stainless steel rod bars. It is located in Tianjin, the Steel base of China, and It is known all over the world.

30408 stainless steel plate - srilankasports.org

UNS S30408 stainless steel sheet plate, View S30408 ... Our company mainly specializes in exporting of special steel, including alloy steel, spring steel, stainless steel,tool steel, die steel, bearing steel and merchant steel. We provide steel round bar, steel square bar, steel flat bar, steel plate, steel sheet, steel coil, steel wire and ...

Uns S30408 Stainless Steel Sheet Plate - alibaba

Uns S30408 Stainless Steel Sheet Plate , Find Complete Details about Uns S30408 Stainless Steel Sheet Plate,S30408 Stainless Steel,S30408 Stainless Steel Plate,S30408 Stainless Steel from Steel Sheets Supplier or Manufacturer-Sichuan Liaofu Special Steel Trading Co., Ltd.

SS 304 Sheet Plate, UNS S30403 Sheets, Stainless Steel 1 ...

NEXTGEN Steel & Alloys is one of the leading manufacturer, suppliers of Stainless Steel 304 / 304L / 304H Sheet Plate, SS 304H Hot Rolled Plates, ASTM A240 Stainless Steel TP304 Cold Rolled Sheets, DIN 1.4306/1.4307 Chequered Plates, SS UNS S30409 Perforated Sheets in india.

304 L Stainless Steel UNS S30403 | Ulbrich

Description

Stainless Steel Sheets and Plates - 316L Stainless Steel ...

Manufacturer of Stainless Steel Sheets and Plates - 316L Stainless Steel Plate, PVC Coated Stainless Steel Sheet 304, SS 304/304l Sheets and SS 316L Grade UNS S31603 Plates offered by North Steel Impex, Delhi.

Stainless Steel 304L Sheets / Plates / Coils

We provide Stainless Steel 304L Sheet in all shapes and sizes and with any specifications that the client's. We are Specialized in High Quality ASTM A240 304L SS Plates, SS UNS S30403, 1.4306, 1.4307 Sheets, Coils, Plates Supplier and Exporter in India.[PDF]

304L Stainless Steel, UNS S30403 - Ulbrich

304L Stainless Steel, UNS S30403 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire AMS 5511, ASTM A240, ASTM A666 304L Alloy Description Alloy 304L is an extra low-carbon variation of 304 making it useable in the “as-welded” condition (without annealing), even in severe corrosive conditions. The alloy has oxidation resistance to ...

Buy Aisi S30408 Stainless Steel Sheet

S30408 / 304 Stainless Steel Sheet - Buy S30408 Stainless ...Tianjin Yichengtong Steel Trade Co., Ltd is a comprehensive company, which is founded in 2008, Specilized in stainless steel plate, stainless steel sheet, stainless steel coils and stainless steel rod bars. It is located in Tianjin, the Steel base of China, and It is known all over the world.[PDF]

Datasheet for Steel Grades Special Alloy S30408

This page is mainly introduced the S30408 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also contains the use of S30408,such as it is commonly used in bars, sheet,plates, steel coils, steel pipes,forged and other materials application.

4.0 - 60.0mm Thickness UNS S30408 Stainless Steel Plates ...

Quality Stainless Steel Plates manufacturers & exporter - buy 4.0 - 60.0mm Thickness UNS S30408 Stainless Steel Plates S30403 S30408 S31603 S32168 from China manufacturer.

Stainless Steel 304L Plates Supplier, SS 304L Cold Rolled ...

Stainless Steel 304L Plates Manufacturer. Marc Steel is a recognized trader and exporter of SS 304L Plates, which are made-up by our specialists in compliance by means of international and national quality of standards by using soaring factor inputs.Alloy 304L Plates does not need post-weld annealing and consequently is lengthily used in heavy gauge parts.

304L Stainless Steel Alloy Data Sheet | CMC - Bellwood

UNS: S30403 EN-DIN: 1.4306. Printable PDF: 304L Stainless Steel Alloy Data sheet Industries supplied include: Process equipment in mining, chemical, cryogenic, food, dairy, and pharmaceutical industries. 304 grade stainless has excellent welding and formability characteristics and is one of the most utilized stainless steels. 304L is an extra low carbon grade with a 0.03% max carbon content ...[PDF]

Stainless steel grades listed in the international ...

Stainless steel grades listed in the international standard ISO 15510:2010 Comparative designations of grades with similar composition from other important standards. (listed by type of steel structure and by increasing intermediate 3-digits code of the ISO name) Type ISO-Name (1) ISO Designation EN UNS …

S30403 Stainless Steel Plate, S30403 Stainless Steel Plate ...

Alibaba offers 81 s30403 stainless steel plate products. About 71% of these are stainless steel sheets. A wide variety of s30403 stainless steel plate options are …

Stainless Steel - Grade 304 (UNS S30400)

304 is the standard "18/8" stainless steel, as well as being the most widely used and versatile of all the stainless grades. It also has excellent forming and welding properties. Some applications include food processing equipment, kitchen benches, fasteners, springs, heat exchangers etc.[PDF]

Stainless steel grade chart - Atlas Steels Australia

Stainless steel grade chart ATLAS STEELS – SPECIALTY STEELS PRODUCT REFERENCE MANUAL ... Austenitic stainless steels Plate Annealed 600 310 40 95 HRB Sheet Annealed 515 205 40 95 HRB ... Grade UNS No. Austenitic stainless steels. 5 S9 ATLAS STEELS – SPECIALTY STEELS PRODUCT REFERENCE MANUAL

AISI 304L (S30403) Stainless Steel :: MakeItFrom

AISI 304L stainless steel is an austenitic stainless steel formulated for primary forming into wrought products. 304L is the AISI designation for this material. S30403 is the UNS number. Additionally, the British Standard (BS) designation is 304S12.

Stainless Steel - 6 Moly Super Duplex API 5LX Copper Nickel

UNS S30400 UNS 30403 UNS S31600 UNS 31603 UNS S31700 UNS 31703 UNS S32100 UNS 32109 UNS S34700 UNS 34709 | Supplier Super Duplex 6 Moly Copper Nickel Titanium and other exotic alloys Supplier UNS S30400 UNS 30403 UNS S31600 UNS 31603 UNS S31700 UNS 31703 UNS S32100 UNS 32109 UNS S34700 UNS 34709 Pipe, Fittings Tubing, Flanges, Valves and more ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.