Tel: +86-371-86151827

40 50mm carbon structual and low alloyed steel plate

Steel grade:40 50mm carbon structual and low alloyed steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

40 50mm carbon structual and low alloyed steel plate Introduction

M 1044 (.40 to .50) Carbon Hot Rolled Steel Flat Bars - A ...

Carbon Steel; High Strength Low Alloy; Beams. Standard I Beams; Wide Flange Beams; Channels; Tees; ... Home / Hot Rolled / M 1044 (.40 to .50) Carbon Hot Rolled Steel Flat Bars. M 1044 (.40 to .50) Carbon Hot Rolled Steel Flat Bars. Merchant Quality (.40 to .50 Carbon) ASTM A 575 M1044 Not Recommended for Heat Treating ... A & C Metals ...

High Strength Low Alloy Steel Plate - INFRA-METALS

ASTM A36 – Standard specification for carbon structural steel. This specification covers shapes of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. ASTM A572 – Standard specification for high-strength low-alloy structural steel.

S355 alloy steel plate 50 mm - srilankasports.org

Carbon Steel Plate supplier Malaysia. Carbon Steel Plate Suppliers, S50C Plate, IS 2062 grade b Supplier in Malaysia, Carbon Steel Plates Malaysia, Supplier of High Quality Structural Carbon Steel Plates ... Thickness (mm) 1.50 mm - 110.00 mm Width (mm) 1250 / 1500 / 1800 / 2000 / 2500 mm ... low alloy steel plate is 2062 steel plate for ...

Plate - McNeilus Steel, Inc.

This specification covers high strength low alloy plate where savings in weight and added durability are important. The atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon structural steels with or without copper addition.

Structural Steel and Steel Alloys Flashcards | Quizlet

Structural Steel and Steel Alloys. STUDY. PLAY. Steel. most common metal in construction ... -Plate- Sheet steel w/ width greater then 8", thickness of 1/4" to more then 1" ... -High Strength low alloy steel- <4% alloy elements, carbon 0.1-0.25%-Corrosion resistant HSLA steels- alloys …

50mm carbon steel plate - alibaba

Alibaba offers 3,015 50mm carbon steel plate products. About 22% of these are steel sheets, 2% are stainless steel sheets. A wide variety of 50mm carbon steel plate options are available to you, such as aisi, astm, and bs.[PDF]

Steel Plate & Sheet - Alro Steel

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

Products – American Metals Corporation

Plate. 3/16” through 12” thick; A36 Standard specification for carbon structural steel hot rolled and pickled and oiled (up to ½”); 572-50/65 Standard specification for high-strength low-alloy steel; A588 Standard specification for high-strength low-alloy steel – weathering application; 656-80 & 715-80 High Yield; 516-70 Standard specification for pressure vessel plates, carbon steel ...

Hot Rolled Carbon Structural And Low Alloyed Plate - w3s.in

China Q195 Carbon Structural and Low Alloyed Steel Plates ...Hot Rolled Steel Plate, Wide Plate, Carbon Structural Steel Plates manufacturer / supplier in China, offering Q195 Carbon Structural and Low Alloyed Steel Plates/Wide Plate/ Hot Rolled Steel Plate, B500b Reinforced Deformed Steel Bar, High Quality Deformed Steel Bars HRB400! ! !

Plate - McNeilus Steel, Inc.

This specification covers high strength low alloy plate where savings in weight and added durability are important. The atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon structural steels with or without copper addition.[PDF]

High-Strength Low-Alloy Steels - ASM International

High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to atmospheric corrosion than conventional carbon steels. They are not considered to be alloy steels in the normal sense because they are

JIS G3101 SS 400 steel plate standard, specification and ...

SS400 is one of the most commonly used hot rolled general structural steel.SS400 steel plate, JIS3101 SS400 steel plate, under JIS3101 standard, we can regard SS400 steel plate as Carbon and low alloy steel SS400 steel plate is one mainly of Carbon and low alloy steel, SS400 steel plate would be used to built containers which can bear low temperature sea water.

S355 alloy steel plate 50 mm - srilankasports.org

Carbon Steel Plate supplier Malaysia. Carbon Steel Plate Suppliers, S50C Plate, IS 2062 grade b Supplier in Malaysia, Carbon Steel Plates Malaysia, Supplier of High Quality Structural Carbon Steel Plates ... Thickness (mm) 1.50 mm - 110.00 mm Width (mm) 1250 / 1500 / 1800 / 2000 / 2500 mm ... low alloy steel plate is 2062 steel plate for ...

EN10025-6 S550QL Carbon and Low-alloy High-strength Steel ...

Any request for EN10025-6 S550QL Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

Low Carbon Steel Plate for Structural Supplier in China

As a structural steel plate supplier we can supply steel plate in hot rolled or cold drawn state According to the quality of the products are divided into low carbon structural steel plate and high carbon structural steel plate.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

Classification of Carbon and Low-Alloy Steels

As a group, carbon steels are by far the most frequently used steels. More than 85% of the steel produced and shipped in the United States is carbon steel. Low-carbon steels contain up to 0.30% C. The largest category of this class of steel is flat-rolled products (sheet or strip), usually in the cold-rolled and annealed condition.

Steel Plate Grades - Continental Steel & Tube Company

Plates over 1 1/2″ have carbon increasing to (0.20-0.33), this is a killed steel that provides the best combination of strength, weldability, and structural soundness. MEDIUM CARBON PLATE STEEL. Medium Carbon Plate Steel in the (.40-.50) carbon range is silicon killed and higher carbon for improved strength.

ASTM A572 Steel Plate - BBN Steel.net

A572GR50 cutting steel plate, A572GR50 Stock steel plates. Gangsteel is specialized in supplying ASTM steel plate in A572Gr50. For more information of A572 Grade 50 steel plates, please check them in following: Chemical composition % of the Product analysis of grade A572 Grade 50 .

steel plate,steel suppliers,carbon steel - Product - BEBON ...

Carbon and low alloy steel; General purpose structural steels; Steel for Boilers and Pressure Vessels; Steel Resistant to Atmospherical Corrosion; High Yield steel; Fine-grain structural steels; Boiler steel; General Construction Steel; High yield strength cold forming steels; Stamping and cold forming steels; Steel for gas cylinders and gas ...

Products – American Metals Corporation

Plate. 3/16” through 12” thick; A36 Standard specification for carbon structural steel hot rolled and pickled and oiled (up to ½”); 572-50/65 Standard specification for high-strength low-alloy steel; A588 Standard specification for high-strength low-alloy steel – weathering application; 656-80 & 715-80 High Yield; 516-70 Standard specification for pressure vessel plates, carbon steel ...

Carbon Steels and Alloy Steels Information - GlobalSpec

globalspec› …› MATERIALS AND CHEMICALS› METALS AND ALLOYSCarbon steels are classified based on the amount of carbon content in the steel. The four main classes of carbon steels are mild and low carbon steel, medium carbon steel, high carbon steel, and ultra-high carbon steel. Mild and low carbon steels contain 0.16–0.29% carbon. They are the most common form of steel as they come at a relatively ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.