Tel: +86-371-86151827

s235jr en 10025 cold rolled steel plate

Steel grade:s235jr en 10025 cold rolled steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s235jr en 10025 cold rolled steel plate Introduction

EN 10025-2 S235JR high strength structural steel plate ...

Henan Gang Iron and Steel Co. Ltd( Gangsteel) is specialized in low alloy high strength structural steel, mainly dealing with . specification standard plates in EN 10025-2, EN 10025-3, EN 10025-4, EN 10025-6, ASTM A633, ASTM A573, ASTM A572, . DIN 17100, JIS G3106, ASTM A709, ASTM A283, ASTM A529, ASTM A656, EN 10225, ISO 630, NFA 35-501, and so on, the thickness up to 300mm.

EN10025 S235JR steel plate standard and specification

S235JR (+N) is a non-alloy structural steel. We have large quantities of S235JR in stock with thicknesses up to 200 mm. The minimum thickness is normally 5 mm. Plates are available up to 3.5m wide and 14m long. Most plates are certified to

s235jr en 10025 hot rolled steel plate - w3s.in

S235jr En10025 Hot Rolled Steel Plate Wholesale, Steel ...S235jr en10025 hot rolled steel plate products are most popular in Mid East, Western Europe, and Africa. You can ensure product safety by selecting from certified suppliers, including 26 with Other, 5 with ISO9001, and 1 with GSV certification.

S235JR,S235JR STEEL,S235JR PLATE - Mild steel plate ...

EN 10025-2 S235JR common carbon structural steel plate are mainly used to produce structural parts of the bolted and welded steel in dustrial area.The minimum yield strength of carbon steel plate S235JR shall be 235 Mpa for nominal thickness,and tensile strength of structural steel plate S235JR shall be within 360-510Mpa.1Mpa is equal to 1 N/mm2.Now Xinsteel can offer S235JR carbon steel plate ...

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

S235jr En 10025 Hot Rolled Steel, S235jr En 10025 Hot ...

Alibaba offers 5,164 s235jr en 10025 hot rolled steel products. About 1% of these are steel sheets, 1% are steel angles, and 1% are stainless steel sheets. A wide variety of s235jr en 10025 hot rolled steel options are available to you, such as aisi, astm, and jis.

S235jr En 10025 Hot Rolled, S235jr En 10025 Hot Rolled ...

Alibaba offers 7,904 s235jr en 10025 hot rolled products. About 1% of these are steel sheets. A wide variety of s235jr en 10025 hot rolled options are available to you, such as free samples.

Hot Rolled Steel Plate | Steel Plate | S235JR - SteelfromChina

As well as Hot Rolled Steel Plate, we are also steel suppliers of Hot Rolled Coil, especially in S235JR. Our range of Mild Steel is huge so you're bound to find what you're looking for and remember, the latest Steel Prices are just a click away.

Hot Rolled Steel Plate | Steel Plate | S235JR - SteelfromChina

As well as Hot Rolled Steel Plate, we are also steel suppliers of Hot Rolled Coil, especially in S235JR. Our range of Mild Steel is huge so you're bound to find what you're looking for and remember, the latest Steel Prices are just a click away.

s235jr en 10025 hot rolled steel plate, View hot rolled ...

s235jr en 10025 hot rolled steel plate, US $ 500 - 750 / Ton, AISI, ASTM, DIN, GB, JIS, A572,A573,Q195, Q 235,Q345 ,ss400,ss304,304L,316,316L,etc, 1mm-200mm.Source ...

S235JR EN 10025 Hot Rolled Mild Steel Plate - w3s.in

S235JR,S235JR STEEL,S235JR PLATE - Mild steel plate ... EN 10025-2 S235JR common carbon structural steel plate are mainly used to produce structural parts of the bolted and welded steel in dustrial area.The minimum yield strength of carbon steel plate S235JR shall be 235 Mpa for nominal thickness,and tensile strength of structural steel plate S235JR shall be within 360-510Mpa.1Mpa is …

S235JR Steel Grade, Mechanical Properties, Chemical ...

S235JR Steel Grade, Mechanical Properties, Chemical Composition, Grade Equivalent Standard: EN 10025-2:2004, European standard for hot-rolled structural steel. Part 2 - Technical delivery conditions for non-alloy structural steels.

Hot rolled steel plate S235JR EN 10025 - Alibaba

Hot rolled steel plate S235JR EN 10025, US $ 2,500 - 2,886 / Ton, AISI, ASTM, DIN, GB, carbon steel, 2-6mm.Source from Chengdu Derbo Steel Co., Ltd. on Alibaba.

S235JR EN10025 hot rolled steel plate

S235JR ST37-2 E24-2 SS400 A283C A36 Steel … S235JR steel plate, under EN10025 standard S235JR steel plate, under EN10025 standard, we can regard S235JR steel plate as Carbon and low alloy steel S235JR steel plate is one mainly of Carbon and low alloy steel, S235JR steel plate is a type of steel …

6mm hot rolled S235JR low carbon steel plate

Carbon Steel Plate Quality Control ... Thickness 4mm Hot Rolled Steel Plate S235jr En 10025. ... Hot Rolled A36/S235jr Steel Plate. 1500mm*6000mm*6mm Hot Rolled ASTM A36 Steel Plate M Red Epoxy Primer and Sand Blasting. 25mm Tk ASTM A572 Series Hot-Rolled Low-Carbon Steel Plates. Hot Rolled Steel Sheet manufacturer - quality Hot Rolled ...

EN 10025 Standard Steel Plate - steelspecs

The foundation of each grade within the EN 10025 standard is the material’s tested yield strength measured in megapascals (1 MPa = .145 ksi). Each structural steel grade begins with an “S” and is followed by suffixes that represent variations in the specific requirement for that structural application.

S235JR / S235JO / S235J2 EN 10025-2 Hot Rolled Coils ...

S235JR / S235JO / S235J2 EN 10025-2 Hot Rolled Coils : Manufacturers, Exporters, Stockist India & Suppliers Worldwide Stainless steel, carbon steel, alloy steel, nickel, other ferrous & non-Ferrous metals in shape of Pipes, Tubes, Pipe Fittings, Flanges, Fasteners from India

EN 10025 S235JR steel,EN 10025 S235JR steel steel plate,EN ...

EN 10025 S235JR steel equivalent grade: S235JR steel plate/sheet is in EN 10025 standard, the material number is 1.0037. The equivalent grades of S235JR steel are DIN 17100 St 37-2, NFA 35-501 E 24-2, UNI 7070 Fe 360 B, BS 4360 40 A, ASTM A 283 C - A 570 Gr. 33.

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

S235JR Plate Suppliers | EN 10025-2 S235 Plate | S235 ...

S235JR Plate Suppliers, Stockist of S235JR (1.0038), EN 10025-2 S235 Plate, EN 10025-2 S235JR Plate, EN 10025-2 S235JO Plate, EN 10025-2 S235J2 Plate, EN 10025-2 S275 Plate, EN 10025-2 S275JR Plate, EN 10025-2 S275JO Plate, EN 10025-2 S275J2 Plate, EN 10025-2 S275N Plate, EN 10025-2 S275NL Plate Price in India ... EN S355K2+N Hot Rolled Steel ...

S235JR Mild Steel - Special steel china supplier-OTAI ...

S235jr steel is a mild steel, its carbon composition below 2%. So the S235JR Mild steel have very good welding performance. For S235JR, we supply the steel plate, steel round bar, steel hexagonal bar, flat bar, square bar and pipe. DIN EN S235JR Mild Steel is European standard of alloy structural steel, It is equivalent with the Chinese ...

S235JR / 1.0038(dubl) Non-alloy quality structural steel ...

EN 10025-2: 2004 Hot rolled products of structural steels. Technical delivery conditions for non-alloy structural steels ... Go here : Chemical composition % of steel S235JR (1.0038(dubl)): EN 10025-2-2004. Nominal thickness = 40(mm) C max = 0.17 Nominal thickness = 40(mm) ... Cold drawn / hard +CR : Cold rolled +FP : Treated to ferrite ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.