Tel: +86-371-86151827

sa572 gr 42 steel plate chemical composition

Steel grade:sa572 gr 42 steel plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sa572 gr 42 steel plate chemical composition Introduction

Reliable China supplier of ASME SA572 Gr.42 steel plates ...

BBN steel is engaged in ASME SA572 Gr.42 steel plates etc steel materials supply. In order to reduce ASME SA572 Gr.42 steel plates production cost, based on medium carbon and high manganese steel composition design, BBN steel improve SA572 Gr.42 steel performance and strength by adding a small amount of niobium, vanadium, titanium micro alloying elements.

A572 Gr.42 steel - steel-grades

A572 Gr.42. This page provides A572 Gr.42 datasheet, A572 Gr.42 mechanical properties, chemical element A572 Gr.42, technical specifications of A572 Gr.42 steel material properties. A572 Gr.42 performance specifications.

SA572Gr50,SA572 Gr.50,SA572 Grade 50 steel plate--Xin ...

Low alloy steel plate SA572 Grade 50 is the most common steel grade in steel standard SA 572/SA 572M.Steel plate SA572Gr50 owned the minimum yield strength at 345 Mpa and the minimum tensile strength at 450 Mpa.Generally for the thickness equal and belows 40mm of steel plate SA572 Grade 50,we suggest rolling under As rolled is ok,for the heavy ...

ASTM A572 Grade 50 - A572 Grade 42, 50, 60, 65 Steel ...

leecosteel› Steel Plate ProductsLeeco Steel distributes A572 steel plate is used in a variety of structural applications including bridges, buildings, construction equipment, and more. We distribute A572 steel plate in the following grades: Grade 42, Grade 50, Grade, 55, Grade 60, and Grade 65. We offer various thicknesses, lengths, and widths to meet your specifications.

ASTM A572 Grade 42|A572 Gr.42|A572Gr42 steel plate__Steel ...

Gangsteel is specialized in supplying ASTM steel plate in A572 Grade 42.For more information of A572 Grade 42 steel plates, please check them in following: Chemical composition % of the Product analysis of grade A572 Grade 42 .

ASME SA572 Grade 50 Carbon Steel Plates

ASTM A572 Grade 50 Carbon Steel Plate is mainly used for bridge plates,gusset plates,base plates and structural steel stiffeners. Carbon Steel ASME SA572 Grade 50 Plates are intended for riveted, bolted, or welded structures primarily in applications where extra strength or reduced end product weight is desired without foregoing strength.

【ASTM A572 Gr. Steel Plates】 A572 Grade 42, Grade 50 ...

Chemtech is specialized in supplying ASTM steel plate in A572 Grade 42. For more information of A572 Grade 42 steel plates, please check them in following: Chemical composition % of the Product analysis of grade A572 Grade 42 .

ASTM A572 Gr42 steel plate Equivalent material steel plate ...

ASTM A572 Gr42 steel plate has the proper tensile strength,good toughness,plasticity,processing property,be rolled into steel plates,shaped steel and profile steel.which usually used to build workshop,bridge,vessel and so on.

A572 Gr.50 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A572 Gr.50 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASTM A572 Grade 50|A572 Gr.50|A572Gr50 steel plate__Steel ...

Gangsteel is specialized in supplying ASTM steel plate in A572Gr50.For more information of A572 Grade 50 steel plates, please check them in following: Chemical composition % of the Product analysis of grade A572 Grade50 .

A572 Structural, Carbon & HSLA Steel Plate - BBN Steel

A high-strength low-alloy steel plate that is utilized in a variety of structural applications. This specification is produced in Grades 42, 50, 55, 60 & 65, the grades representing the yield strength. Plates that are 4” and thicker are made to a 42 KSI yield, although material can be modified to reach the 50 KSI min yield.

A572 grade 42 A572Gr42 A572 Gr 42 steel plate-S355J2 ...

A572 Grade 42 steel plate,A572 Grade 50 steel plate,A572 Grade 55 steel plate,A572 Grade 60 steel plate,A572 Grade 65 steel plate. A572 Grade 42 steel plates . A 572 Gr.42 steel plate is high strength low alloy columbium-vanadium structural steel grade. A 572 Gr.42 steel intended for riveted or bolted construction of bridges.

A-572 50-High Strength, Low Alloy Steel

aasteel› …› Construction / Bridge Building (HSLA)Overview

a572-42 steel chemical composition -- Henan BBN

a572-42 steel chemical composition specification can be offered by KATALOR ,we are professional a572-42 steel chemical composition suppliers and manufacturer in China, if you need a572-42 steel chemical composition price and application ,please contact us.

ASME SA572 Gr 42 steel Chemical composition - pressure ...

Reliable China supplier of ASME SA572 Gr.42 steel plates . BBN steel is engaged in ASME SA572 Gr.42 steel plates etc steel materials supply. In order to reduce ASME SA572 Gr.42 steel plates production cost, based on medium carbon and high manganese steel composition design, BBN steel improve SA572 Gr.42 steel performance and strength by adding a small amount of niobium, …

ASTM A 572 Gr. 42 steel,ASTM A 572 Gr. 42 steel steel ...

Fe E 275KG N. ASTM A 572 Gr. 42 steel chemical composition %: Main chemical composition in ASTM - SAE A 572 Gr. 42 steel is carton max 0.14, silicon max 0.50, manganese max 1.60, phosphorus max 0.025, Sulphur max 0.025, chromium max 0.30.

SA572 steel plate, ASME SA572 steel. - JOIN WIN STEEL

ASME SA572 series material is belong to High Tensile Low alloy steel in ASME standard. ASME SA572 also can be called High Tensile Low alloy Ni-V steel. ASME SA572 GR42(290), SA572 GR50(345), SA572 GR60(415), SA572 GR65(450)[PDF]

Steel grades according to American standards - A36, …

Chemical composition A36 - 04b A36 0.26 0.05 0.04 ≤0.40 A572 - 04 ... A572 - 04 Grade 42 ≥290 [42] ≥415 [60] 20 24 Grade 50 ≥345 [50] ≥450 [65] 18 21 Grade 55 ≥380 [55] ≥485 [70] 17 20 ... Steel grades according to American standards - A36, A572, A588, A709, A913, A992.

A572 Gr.50 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A572 Gr.50 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

A572 Structural, Carbon & HSLA Steel Plate - BBN Steel

A high-strength low-alloy steel plate that is utilized in a variety of structural applications. This specification is produced in Grades 42, 50, 55, 60 & 65, the grades representing the yield strength. Plates that are 4” and thicker are made to a 42 KSI yield, although material can be modified to reach the 50 KSI min yield.

IS 2062 Grade E350B Hot Rolled Steel Plates Supplier, ASME ...

IS 2062 GRADE E350B Plates Manufacturer. Marc Steel is a popular trader and supplier of IS 2062 GRADE E350B Plates, which is strong and sturdy in nature and ensures longer functional life.IS 2062 GRADE E350B Plates We are also one of the renowned importer, exporter and manufacturer of IS 2062 High Tensile Plates GRADE E350B that are precisely designed by our professionals as per market …

ASME SA572 Grade 50 Carbon Steel Plates

ASTM A572 Grade 50 Carbon Steel Plate is mainly used for bridge plates,gusset plates,base plates and structural steel stiffeners. Carbon Steel ASME SA572 Grade 50 Plates are intended for riveted, bolted, or welded structures primarily in applications where extra strength or reduced end product weight is desired without foregoing strength.

supplier of sa572 grade 50 hardness,A36,Q235B,Q345B steel ...

SA572 Grade 50 steel coils property: SA572 Grade 50 steel coils property also can be called as alloy structural steel. Alloy steel means this kind of grade contains some special alloy composition. Alloy steel plate application is very wide, as : Machine, pressure vessel, construction and so on .

Speedy Metals Information for ASTM A572 Grade 50 Plate

Grade 50 is used in general plate applications when the plate will be riveted, bolted, or welded. Grade 50 is a Columbium-Vanadium steel that offers a minimum yield of 50,000 PSI. In addition, ASTM A572 Grade 50 is noted for its increased resistance to atmospheric corrosion.

astm a572 grade 50 chemical composition - …

HSLA Grade 50 is a material grade and designation defined in ASTM A572 standard. ASTM A572 is an international material standard for billet steel for general structural usage. A-36 steel can be compared with this type of steel. HSLA Grade 50 Steel Chemical Composition ASTM A572 defines the chemical composition of HSLA Grade 50 steels as under:

A572 Steel Plate | Precision Grinding, Inc.

A572 Steel General Information. The ASTM A572 carbon steel specification covers the standard requirements for Grades 42, 50, 55, 60, and 65 for high-strength low-alloy columbium-vanadium structural steel shapes, plates and bars for applications in bolted, …

SA709 Gr 36 Chemical composition - pressure vessel steel ...

A 302 gr.B Chemical composition,A 302 gr.B Mechanical Adopt standard: ASME SA302 Sell steel grade: SA302 Grade A ,SA302 Gr.B,SA302 Grade C, SA302 Grade D steel grade SA302 Gr.B steel plates standard specification for pressure vessel plates in alloy steel, We have contacted the technical department of HBIS wuyang mill, from ingot or billet steel

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.