Tel: +86-371-86151827

steel sheet for pressure vessels

Steel grade:steel sheet for pressure vessels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel sheet for pressure vessels Introduction

Boilers Pressure Vessels Steel Plate-GNEE GROUP Discount ...

Boiler steel plates,also named as pressure vessel steel plates which including carbon steel and alloy steel for High or intermediate and low temperature services.Main steel grades in boiler steel plates supplied by Xinsteel were approved by Germany.

A515 Gr70 steel - pressure-vessel-steel

A515 Gr70 Steel Plate, A515 Gr70 Steel price-Seed steel A515 Gr 70 Steel is is a high-temperature welding boilers and other pressure vessels with carbon silicon steel plate,seed steel can provide the specification that ...

Gnee Steel – pressure vessel steel plate

Gnee steel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petro chemical industry

Forged Steel Plate Fire Resistance Sheet Cladding Pressure ...

Find forged steel plate fire resistance sheet cladding pressure vessel 13crmo44 here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

ASTM A240 Stainless Steel Sheets Plates For Pressure Vessels

HUITONG is a famous China Industrial Prim Rough manufacturer and supplier, equipped with a productive factory and company and as a professional astm a240 stainless steel sheets plates for pressure vessels exporter and seller, we are always welcoming you to buy and wholesale high quality astm a240 stainless steel sheets plates for pressure vessels from our factory.

Pressure Vessel Steel Plate | Alloy Steel Sheet | Table

Q345DR Pressure Vessel Steel Plate. Equivalent to 16MnR, Q345DR is a common low-alloy steel, is a common material for boiler pressure vessels steel, boiler pressure vessels. With high strength and good plastic toughness. The common delivery status is hot rolling or normalizing. It is a low alloy high strength steel with low Mn content.

Pressure Vessel Carbon Steel Plates, Pressure Vessel ...

Alibaba offers 1,425 pressure vessel carbon steel plates products. About 38% of these are steel sheets, 1% are stainless steel sheets. A wide variety of pressure vessel carbon steel plates options are available to you, such as aisi, astm, and gb.

15crmor steel - pressure-vessel-steel

GB713 15CrMoR steel plate is our mainly products.GB713 15CrMoR steel plate is widely used on heat exchangers.GB713 15CrMoR steel … 15CrMoR GB713 Pressure Vessel Steel Plate Features 15CrMoR applications,chemical composition,mechanical properties,15CrMoR steel plate,15CrMoR pipe,tube,15CrMoR sheet,bar,15CrMoR coil,sections,15CrMoR china …

ASTM A240 / A240M - 18 Standard Specification for …

1.1 This specification 2 covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for pressure vessels and for general applications including architectural, building, construction, and aesthetic applications.

steel sheet pressure vessel - Cold rolled steel plate price

Structural Steel Sheet Pressure Vessel Steel (PVS) Pressure Vessel steel sheet is intended for fusion welding or brazing into gas cylinders, boilers and similar end use high pressure applications. This product is ordered to mechanical property requirements ranging typically from 45 ksi to 75 ksi (310 MPa to 520 MPa) minimum tensile strength. ...

Pressure Vessel (PVQ) Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsLeeco Steel is your resource for pressure vessel steel plate. PVQ, pressure vessel quality, steel plate. is used for the production of pressure vessels: a closed container designed to hold gases or liquids at a pressure substantially different than the ambient pressure.

Pressure Vessel Thickness Calculation

Pressure Vessel (Cylindrical) Thickness Calculation - calculates thickness based on ASME Sec VIII Div 1, Div 2 for a cylindrical pressure vessel for Carbon Steel (CS), Killed Carbon Steel (KCS), Stainless Steel (SS), SS304, SS316 metallurgy

steel sheet pressure vessel - Cold rolled steel plate price

Structural Steel Sheet Pressure Vessel Steel (PVS) Pressure Vessel steel sheet is intended for fusion welding or brazing into gas cylinders, boilers and similar end use high pressure applications. This product is ordered to mechanical property requirements ranging typically from 45 ksi to 75 ksi (310 MPa to 520 MPa) minimum tensile strength. ...

Pressure Vessel Thickness Calculation

Pressure Vessel Thickness Calculates thickness based on ASME Sec VIII Div 1, Div 2 for a cylindrical pressure vessel for various steels.

ASME SA387 Grade 11 Class 2 (SA387GR11CL2) Pressure Vessel ...

Henan HZZ offers a large selection of high quality ASME SA387 grade 11 class 2 (SA387GR11CL2) pressure vessel and boiler steel plate with HIC. Having been focused on various steel products for over 20 years, we now brings customers quality products with high precision and high strength. Fast delivery and good after-sales service are also available.

Tata Steel - Hot-rolled - Steel for pressure vessels

tatasteeleurope› …› Products› Engineering› Hot-rolledOur structural steel for pressure vessels delivers excellent impact toughness and weldability. Special grades offer guaranteed strength levels at temperatures up to 400°C and steels compliant with EN 10207 and/or EN 10028 for the manufacture of simple pressure vessels.

Boiler and Pressure Vessel Steel Plate

ASTM A537 CL2 steel plate/sheet,ASTM A537 CL2 steel plate/sheet, under ASTM standard, we can regard A537 CL2 steel plate/sheet for simple pressure vessels steel. A 537 Class 2 carbon steel plates are engineered to be used in pressure vessel applications ... Learn more. Boiler explosion - Wikipedia.

Buy Pressure Vessel Steel Sheet - w3s.in

SPV315 Pressure vessel steel plate is a kind of material for pressure vessel steel under standard JIS G3115.SPV 315 Pressure vessel steel sheet is mainly used to for manufacturing boilers.SPV315steel sheet was primly dealed in the Bebon.

A387 Gr.22 Cl2 Alloy Steel Sheets for Pressure Vessels ...

A387 Gr.22 Cl2 Alloy Steel Sheets for Pressure Vessels. Leave a Message Get a price EX-Stock Promotion Center. A387 Gr.22 Cl2 material steel is a Chrome Moly steel plate, containing 2.25% chromium and 1% Molybdenum. The high levels of chromium provide the steel with outstanding oxidation and corrosion resistance.

MetalsDepot® - A516 PVQ Plate | Pressure Vessel Plate ...

A516-70 PVQ Steel Plate aka Pressure Vessel Quality steel plate is designed primarily for use in welded pressure vessels where notch toughness or crack resistance is required. A516 Grade 70 is the most common high strength steel plate used in the construction of boilers and pressure containment fabrication and meets the quality standards set by the oil, gas and petrochemical industry.

pressure vessel steel plate suppliers -Triton Alloys Inc

Triton Alloys Inc. is a Pressure Vessel Steel Plate stockholders and suppliers, delivering to the whole of the world.we are ISO 9001:2008 accredited and supplies Pressure Vessel Steel Plate to internationally approved quality standards for applications. Pressure Vessel Steel Plate have excellent quality to fully satisfy customer’s requirements.

Plate & Sheet | PDM Steel Service Centers, Inc.

Available Grades. A516/70 is a carbon steel plate for boilers for stationary service and other pressure vessels. The maximum thickness under this specification is 6”.

ASTM A537 Class 2 (A537CL2) Pressure Vessel and Boiler ...

Henan HZZ offers a large selection of high quality ASTM A537 class 2 (A537cl2) pressure vessel and boiler steel plate with Q+T and ut. Having been focused on various steel products for over 20 years, we now brings customers quality products with high precision and high strength. Fast delivery and good after-sales service are also available.

china Pressure vessel steel plate factory manufacturer ...

1.5mm wall thick 201 stainless steel tube price per meter

Outokumpu stainless steel finder | Pressure vessel shell ...

Pressure vessel shell thickness calculation tool is based on design standard EN 13445. Use this tool to compare how steel grade selection affects the wall thickness in a pressure vessel's cylindrical shell. This tool can be used for estimation only and end caps/dished ends are not included in calculations.

sph440 steel equivalent material

SAPH440 steel is a structural Hot Rolled steel in the form of plates, sheets & strips for automobile ... JIS G3113 Structural Automobile Hot Rolled SAPH440 Steel SAPH 440 steel is a commercially used hot rolled type of steel.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.