Tel: +86-371-86151827

321 hot rolled stainless steel plate sheet

Steel grade:321 hot rolled stainless steel plate sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

321 hot rolled stainless steel plate sheet Introduction

Hot rolled 321 stainless steel sheet

Location: 首页 > Products > Stainless Steel Plate&Sheet > Hot rolled 321 stainless steel sheet Stainless Steel Plate&Sheet Hot rolled 321 stainless steel sheet . Hot rolled 321 stainless steel sheet

321 hot rolled stainless steel plate - hmmetalmaterial

321 hot rolled stainless steel plate. About 321 material: 321 stainless steel is Ni-Cr-Ti-type austenitic stainless steel, its performance is very similar to the 304, but due to the addition of the metal titanium, it has a better intergranular corrosion resistance and high temperature strength.

Stainless Steel 321 Plates, SS 321 Sheets, AISI 321 Plates ...

Guru Gautam Steel is one of the leaders amongst manufacturers and exporters of Stainless Steel 321 Sheets, SS 321 Plates, ASTM 321 Plates, AISI 321 Sheets, Stainless Steel 321 Flats, SS 321 Rings, ASME 321 Plates, Nr. 1.4541 Sheets.

321 stainless steel sheet - deysteel

321 stainless steel sheet. Email: sherry[email protected] One of the Ti 321 stainless steel as a stabilizing element exists, but it is hot strong steel at high temperature is much better than 316L.321 stainless steel organic acid and inorganic acid in different concentration and different temperature, especially has good resistance to abrasion performance in oxidizing medium, used in the ...

321/316L hot rolled stainless steel plate - tm-steel

316/316L hot rolled stainless steel plate TIME:2017-08-17. Product Introduction: 316/316L stainless steel. 316 316L steel is following the 304 stainless steel after the second most widely used. The only difference between them is the carbon content. This leads to a little difference between the two, but the overall use is the same.

Hot Rolled Plate | North American Stainless

Hot Rolled Plate. NAS provides hot rolled product in annealed and pickled condition in plate form (PMP-Discrete). We also offer a plate product in semi-finish …

Stainless Steel Plate / Sheet - Dongshang Stainless

Dongshang stainless is a stainless steel plate & sheet supplier in China, offering both cold rolled and hot rolled sheet & plate, including 304, 304L, 316L, 321 and duplex steels, with various finishes and different dimensions.

hot rolled stainless steel - deysteel

hot rolled stainless steel. Home; About Us. About Us; News. ... stainless steel sheet stainless steel coil stainless steel pipe Surface/ Finish. stainless steel plate/sheet. 316/ 316L stainless steel plate. 2205 stainless steel plate ... 310/ 310S stainless steel sheet. 321 stainless steel sheet. 316/ 316L stainless steel sheet. 304/ 304L ...

316L hot rolled stainless steel plate - hmmetalmaterial

316L hot rolled stainelss steel plate. About 316L material: 316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on.

321 Stainless Steel Alloy Data Sheet | ESM-Hampshire

Additional Information on 321 Stainless Steel Alloy Stainless Steel ‘Stainless’ is a word coined with reference to the creation of these steels for use as cutlery. Stainless was adopted as a generic term for such steels. Currently, it covers a broad array of steel grades and types for oxidation or corrosion resistant purposes.

321 Stainless Steel Plate

321 Stainless Steel Round Bar 321Plate Sheet Tube-Supplier. 321 Stainless steel is available for order in tubing, round bar, plate, sheet. 321 tubing is a common and AMS 5510 is a common spec, call Michlin for 321.

Stainless Steel Plate / Sheet - Dongshang Stainless

Dongshang stainless is a stainless steel plate & sheet supplier in China, offering both cold rolled and hot rolled sheet & plate, including 304, 304L, 316L, 321 and duplex steels, with various finishes and different dimensions.

321 hot rolled stainless steel plate - tm-steel

321 hot rolled stainless steel plate TIME:2017-08-17. Product Introduction: About 321 stainless steel. 321 stainless steel is Ni-Cr-Ti-type austenitic stainless steel, its performance is very similar to the 304, but due to the addition of the metal titanium, it has a better intergranular corrosion resistance and high temperature strength.

ASTM A240 Grade 321 Stainless Steel Sheets & Plates| SS ...

Piyush Steel is one of the leaders manufacturers and exporters of high quality ASTM A240 Grade 321 Stainless Steel Sheets & Plates, Stainless steel 321 Sheets & Plates, ss 321 Sheets & Plates, Sheets & Plates, ASME 321 Sheets and Plates, ASTM A240 Grade 321 Stainless Steel Sheets & Plates manutacturer in india.

Stainless Steel 321 Plates Supplier, SS 321 Cold Rolled ...

Stainless Steel 321 Plates Manufacturer. Marc Steel is an acknowledged supplier and manufacturer of SS 321 Plates, where our specialists keeps the rightness in delivery of small and large orders for to sustain the quality at its top.Stainless Steel 321 Plates These Alloy 321 Sheets are being made from specialists, who make the collection by severely following the industry put down standards ...

hot rolled stainless steel - deysteel

hot rolled stainless steel. Home; About Us. About Us; News. ... stainless steel sheet stainless steel coil stainless steel pipe Surface/ Finish. stainless steel plate/sheet. 316/ 316L stainless steel plate. 2205 stainless steel plate ... 310/ 310S stainless steel sheet. 321 stainless steel sheet. 316/ 316L stainless steel sheet. 304/ 304L ...

321 Hot rolled Stainless steel plate - Huaxiao Metal ...

Huaxiao Capacity about 321/321H Hot rolled stainless steel plate ,321/321H HRP,PMPThickness: 1.2mm - 10mmWidth: 600mm - 3200mm, the narrowed products pls check in strip productsLength: 12000mmPallet: ...

Stainless steel 321 sheets and plates stockist and supplier

Mukesh Steel are Manufacturer, Exporter and Supplier of Stainless Steel Sheets and Plates. Mukesh Steel are Manufacturing Stainless Steel 321 Sheets and Plates of amazing crude materials. Accessible in sizes, thickness and determinations, this plate is very requested by various supporters.

Hot Rolled Stainless Steel Plates| HR Plate| Sheet ...

Hot Rolled Stainless Steel Plate, Sheet and Coil Available Offer and Discounts Buy Now Stainless Steel Plate at an Attactive Discounted Price, Order Above USD $ 25000 are Eligible of 2% Discount. We Offer Free Insurance and Best Shipping Rates. Our Prices are Always More Competitive and without any compromise in Quality of the Material.

Buy 321 Hot Rolled Stainless Steel Sheets

Buy Cheap Hot Rolled 321 Stainless Steel Sheet from Global ...Alibaba offers 15,021 hot rolled 321 stainless steel sheet products. About 93% of these are stainless steel sheets, 4% are steel sheets, and 1% are stainless steel bars. A wide variety of hot rolled 321 stainless steel sheet options are available to you, such as aisi, jis, and din.

304 / 304L / 321 / 316L Hot Rolled Steel Sheet , 3mm - …

Quality Hot Rolled Stainless Steel Plate manufacturers & exporter - buy 304 / 304L / 321 / 316L Hot Rolled Steel Sheet , 3mm - 8mm Chequered Floor Plate from China manufacturer.

Cold Rolled Stainless Steel Plate Sheet - htongsteel

Shaanxi Huitong Special Steel Co.,Ltd is a famous China industrial sheets and plates manufacturer and supplier, equipped with a productive factory and company and as a professional industrial sheets and plates exporter and seller, we are always welcoming you to buy and wholesale high quality industrial sheets and plates from our factory.

321 stainless steel plate,astm a240 tp321 , sa 240 gr 321 ...

Superior steel overseas is supplier of 321 stainless steel plate since 1999, we have stock of Jindal make ss 321 plate,stock for sale of astm a240 tp321 & asme sa 240 grade 321 sheet, SS 321 Hot rolled coil,ss 321 CR shim,best price of ss 321 plate in india,check latest & updated price list of SS 321 Sheet.

Steel Sheet Plate | Industrial Metal Supply | Industrial ...

Hot Rolled Steel Sheet & Plate Hot rolled sheet and plate provides a rougher surface than cold rolled steel and plate. When galvanized it is also regularly used in applications where corrosion resistance is a necessity. High strength and highly formable hot rolled sheet and plate is …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.