Tel: +86-371-86151827

din 17100 alloy plate price

Steel grade:din 17100 alloy plate price

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

din 17100 alloy plate price Introduction

DIN 17100 St44-2 steel plate, St44-2 steel price ...

St44-2 steel plate Application: St44-2 steel has the proper tensile strength, good toughness, plasticity, processing property, be rolled into steel plates, shaped steel and profile steel, which usually are used to build workshop, bridge, vessels and so on .The delivery state usually are hot rolled, control rolled, or Normalized. DIN 17100 St44 ...

Alloy steel plate DIN 17100 steel plate price - w3s.in

ST44-3U steel plate, DIN 17100 ST44-3U steel plate is a kind of Low alloy high strength steel plate. DIN 17100 ST44-3U steel plate is characterised by a minimum yield strength of 265-275MPa and tensile strength of 410-580MPa,so ST44-3U steel is mainly used in riveted, bolted, or welded construction of bridges and buildings.The followings are ...

DIN 17100 St52-3U steel plate, St52-3U steel price ...

DIN 17100 St52-3U steel chemical analysis -% by mass: C: 0.20% Mn: 1.60% P: 0.040% S: 0.040% Si:0.55% St52-3U steel plate Mechanical properties: Yield Strength ReH:355—345 Tensile Strength Rm:510—680 490—630 Fracture Elongation[%]:13—20 Notch Impact:27J BEBON INTERNATIONAL would do its best to serve you the most qualified St52-3U.

DIN 17100, DIN 17102, DIN 17119, DIN 17120 - DIN 17100 ...

din 17100, din 17102, din 17119, din 17120 Prominent & Leading Exporter from Mumbai, we offer din 17100 st60-2 plate, din 17100 st33 plates, din 17120 st 37-3 pipe, din 17175 st45.8 pipe, din 17100 rst37.2 plate and din 17100 st 70-2 plates.

Din 17100 Steel, Din 17100 Steel Suppliers and ...

Alibaba offers 428 din 17100 steel products. About 63% of these are steel sheets, 1% are steel round bars. A wide variety of din 17100 steel options are available to you, such as en, din, and aisi.

EN 10025 S355J2+N High Strength Low Steel Plate Supplier ...

Leading Stockist and exporter of EN 10025 S355J2+N Plates, DIN 17100 St52-3N Hot Rolled High Tensile Plates, Price of S355J2+N Material,Buy ASTM A572-50 EN 10025 S355J2+N High Strength Low Steel Plate Supplier, ASTM A572-50 Offshore Steel Plates Exporter, EN 10025 Pressure Vessel DIN 17100 St52-3N Steel Plates Dealer | Superior Steel

Alloy steel plate DIN 17100 steel plate price - w3s.in

DIN 17100 St33 steel plate, St33 steel price, St33 ... DIN 17100 St33 steel plate, St33 steel price, St33 steel supplier BEBON INTERNATIONAL offer St33 steel, St33 steel price. BEBON INTERNATIONAL is a professional carbon and low alloy steel supplier, and we register Hundreds of thousands of tons of ex-stock source on our spot trade flatform.

DIN 17100, DIN 17102, DIN 17119, DIN 17120 - DIN 17100 ...

Exporter of DIN 17100, DIN 17102, DIN 17119, DIN 17120 - DIN 17100 ST60-2 Plate, DIN 17100 St33 Plates, DIN 17120 St 37-3 Pipe and DIN 17175 St45.8 Pipe …

DIN 17100 St 37-2 steel,DIN 17100 St 37-2 steel steel ...

DIN 17100 St 37-2 steel equivalent grade: St 37-2 steel plate/sheet is in DIN 17100 standard, the material number is 1.0037. The equivalent grade of St 37-2 steel are EN 10025 EN 10025, NFA 35-501 E 24-2, UNI 7070 Fe 360 B, BS 4360 40 A, ASTM A 283 C - A 570 Gr. 33.[PDF]

DIN 17100 St52-3 steel plate

Carbon and low alloy steel EN10025 St52-3 steel plate St52-3 steel plate, under DIN17100 standard St52-3 steel plate, under DIN17100 standard, we can regard St52-3 steel plate as Carbon and low alloy steel ... DIN 17100 St52-3 steel plate Created Date: 7/5/2011 11:39:45 AM ...

DIN 17100 Steel Plates Archives - Gangsteel

Gangsteel supply DIN17100 ST52-3 ST52-3N ST37-2, ST52-3, ST50-2, ST60-2, ST70-2 Steel plate low alloy and high strength steel plate. DIN 17100 ST52-3 steel plate price and stock supplier. You are here: Home » Low Alloy and High Strength Steel plate » DIN 17100 Steel Plates.

Din Standard Low Alloy St52 3 Steel Plates-BBN STEEL sale ...

Buy Din 17100 St52 to 3 Low Alloy High Strength Steel Plate. Buy Din 17100 St52 to 3 Low Alloy High Strength Steel Plate steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. ST52-3 steel plate - BEBON INTERNATIONAL. PDFST52-3 steel plates information.

EN 10025 S355J2+N High Strength Low Steel Plate Supplier ...

Leading Stockist and exporter of EN 10025 S355J2+N Plates, DIN 17100 St52-3N Hot Rolled High Tensile Plates, Price of S355J2+N Material,Buy ASTM A572-50 EN 10025 S355J2+N High Strength Low Steel Plate Supplier, ASTM A572-50 Offshore Steel Plates Exporter, EN 10025 Pressure Vessel DIN 17100 St52-3N Steel Plates Dealer | Superior Steel

DIN 17100 ST52-3,ST52-3 steel plate__Steel Supplier

Gangsteel is specialized in supplying DIN17100 steel plate in ST52-3. DIN 17100 ST52-3,ST52-3 steel plate

supplier of plate 10mm din 17100,A36,Q235B,Q345B steel ...

lower price din 17100 steel plate. BEBON INTERNATIONAL offer St33 steel plate price. BEBON INTERNATIONAL is a professional DIN 17100 St33 steel supplier, and we offer high prime quality DIN 17100 … s235jr-steel /DIN17100. 2017-11-3DIN 17100- Katalor Industry - bsteelplate AISI 310S stainless steel price and DIN 17100 St44-3 steel.

USt37-2 low alloy steel in Mongolia

We all know that DIN 17100 USt37-2 carbon and low alloy steel plate is popular in our life. there are large quantity DIN 17100 USt37-2 carbon and low alloy steel plate used in our life. there is no doubt that there are many buyer and exporter of DIN 171.

Professional DIN 17100 USt37 2 HSLA steel sheet size ...

BBN steel offer all kinds of weathering steel,carbon and low alloy and China GBT 4171 Q295NH corten steel plate stock,steel stock,hot sell A36 steel,A283GradeC steel stock,A572Grade 50 steel,S235JR stock,S355JR steel stock,SS400,St37-2,Corten A steel stock,S355J2WP stock price.

St52-3,St52-3 STEEL,St52-3 PLATE

Steel plate St52-3 is most normal used among all kinds of low alloy steel grades.It is equal to Chinese steel grade Q345B,low alloy high strength steel plate. Low alloy steel plate St52-3 is used to manufacture the plants of factory ,the common constructure and construction machinery and equipments.The additional technical requirements for ...

din 17100 steel plate steel plate sheet - srilankasports.org

Alloy steel plate DIN 17100 steel plate price. St 37-2 steel plate/sheet is in DIN 17100 standard, the material number is 1.0037. The equivalent grade of St 37-2 steel are EN 10025 EN 10025, NFA 35-501 E 24-2, UNI 7070 Fe 360 B, BS 4360 40 A, ASTM A 283 C - A 570 Gr. 33.

St52 3 Low Alloy Steel Plate Price - hopkinsplasticsurgery

St52-3N steel plate ,under DIN 17100 standard ,we can regard St52-3N steel plate as Carbon and low alloy steel,if you need St52-3N Steel plate price and specification . ... St52-3N steel plate under DIN 17100, it is a kind of carbon and low alloy steel. St52-3N steel plate can be readily welded to other weldable steel. With its low . Learn more

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.