Tel: +86-371-86151827

astm a285 gr b steel plate chemical composition

Steel grade:astm a285 gr b steel plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a285 gr b steel plate chemical composition Introduction

ASTM A285 Grade B steel plate steel plate

ASTM A285 Grade B steel plate is intended for use in standard tanks and boilers rather than high pressurised vessels due to its lower yield strength. With good forming and welding characteristics, ASTM A285 Grade B steel plate is supplied throughout the oil gas and petrochemical industry.

ASTM A285 and ASTM A283 steel plate comparsion

ASTM A285 Steel Introduction: With 3 steel grades (Grade A, Grade B, Grade C) covering tensile strength range from 310-515Mpa,usually ASTM A285 steel plate is delivered as-rolled condition. made by killed, semi-killed, capped or rimmed steel practices according to the end users’ requirement. ASTM A285 steel could be manufactured into many steel...

ASTM A285 Grade B|A285 Gr.B|A285GrB STEEL PLATE__Steel ...

astm a285 grade b|a285 gr.b|a285grb steel plate ASTM A285 standard specification for pressure vessel plates, carbon steel, low- and intermediate-tensile strength. ASTM A285 plates are normally supplied in the as-rolled condition.

A285 grade C steel plate, A285 grade C chemical composition

A285 grade C steel plate, A285 grade C chemical composition. A285 grade C steel plate is a kind of pressure vessel plates. A285 grade C material has good forming and welding characteristics under conventional methods. Thickness: 6mm to 300mm, Width: 1500mm to …

ASTM A285 Grade C steel plate Carbon Equivalent steel ...

ASTM A285 Grade C steel plate is found throughout industry in a wide range or low pressurized applications.ASTM A285 Grade C steel plate is used in a range of other applications including structural,mechanical and general engineering purposes. ASTM A285 Grade C steel plate Chemical composition(%) C≤0.28 Si:0.08-0.45 Mn≤0.98 P≤0.035 S≤0.035

ASTM A285 GrA/B/C Steel Plate For Welded Pressure Vessel ...

Steel Grade: Grade A, Grade B, Grade C Product Scope: ASTM A285 covers carbon steel plates featured with low- and intermediate-tensile strengths that are used for fusion-welded pressure vessels, production method may be killed, semi-killed, capped, or rimmed steel practices as the producer's option.

ASTM A285 Steel Plates - Gangsteel

ASTM A285 Steel Plates ASTM A285 Grade C|A285 Gr.C|A285GrC STEEL PLATE ASTM A285 standard specification for pressure vessel plates, carbon steel, low- and intermediate-tensile strength.

Steel Plate ASTM A285/A285M Grade C Grade B Grade A in ...

Steel Plate ASTM A285/A285M Grade C Grade B Grade A in Large Stock for Your Project. Chemical and mechanical properties of ASTM A285 Grade C(A285GRC) Grade Chemical Composition(%) C Mn≥ Si P S ASTM A285 Grade C(A285GRC) 0.28 0.98 - 0.035 0.035 Grade

ASTM A285-C, Grade A285-C, A285-C steel - Boiler steel plate

15mo3 alloy steel plate chemical composition. 15MO3 steel plate is one mainly of steel for boiler steels. DIN 17155 15MO3 steel is mainly used for boilers and pressure vessels with elevated temperatures which is equivalent to EN10028 16Mo3 and UNI5869 15Mo3, 15D3 (NFA 36205) and ASTM A204Gr.B. S.

ASTM A 285/A283 Grade C Sheets and Plates, A285 Gr.C ...

Rexton Steel & Alloys manufacturer, trades and supplies high quality ASTM A285 Grade C plates, A285 Gr.C Boilers plates, ASTM A 285/A283 Grade C Sheets and Plates, ASME A 285 / A283 Grade C Sheets and Plates Pressure Vessel Steel Plate worldwide from Mumbai, India.Heat Treatment: Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical

ASTM A283 Carbon Steel Plate for Sale

ASTM A 36 covers carbon steel plate, shape, and bar of structural quality for use in riveted, bolted or welded construction of bridges and building and for general structural purpose. From material scope, both ASTM A 36 and ASTM A 283 are the carbon steel of structural quality for general application.

ASTM A285 Grade C Carbon Steel Pressure Vessel and Boiler ...

ASTM A285 Grade C Carbon Steel plate, ASME SA285 Gr.C Pressure Vessel Steel Plate Exporters, Suppliers and Stockists in India. The steel type is commonly used in standard Tanks and Boilers. The steel type also has good formability and weld-ability. Our ASTM A 285 Grade C steel is also used in the fabrication of Carbon steel pressure vessels. We deliver products that are available in customizable …

ASTM A285-C, Grade A285-C, A285-C steel - Boiler steel plate

15mo3 alloy steel plate chemical composition. 15MO3 steel plate is one mainly of steel for boiler steels. DIN 17155 15MO3 steel is mainly used for boilers and pressure vessels with elevated temperatures which is equivalent to EN10028 16Mo3 and UNI5869 15Mo3, 15D3 …

ASTM A285 Grade C Middle or low strength carbon steel ...

Hot-sale product. A285 Grade C Specification : A285 Grade C is a kind of common carbon steel, whose tensile is low or mid-low. There are three grades or levels material GR A/B/C in the standard ASME SA-285/SA-285M. Plates ordered to this specification A285 Grade C are normally in the as-rolled condition.

Chemical Compositionof ASTM A36,ASTM A285 and ASTM …

Chemical Compositionof ASTM A36,ASTM A285 and ASTM A283 steel plate compatsion Posted:10/11/2017 4:47:00 AM As a steel supplier in China,Shanghai katalor steel offer A36,ASTM A285 and ASTM A283 steel plate stock in China,with factory price,certificate and high quality.Here offer Mechanical Property comparion of ASTM A36,ASTM A285 and ASTM A283 ...

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon Steel Plate

The chemical composition of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are listed in table 2. Table 2. ASTM A516 Grade 70 / ASME SA516 Grade 70 - Mechanical Properties. The mechanical properties of ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate are outlined in table 3.

ASTM A285 Grade B vs. ASTM A36 Carbon Steel :: …

Both ASTM A285 grade B and ASTM A36 carbon steel are iron alloys. Both are furnished in the as-fabricated (no temper or treatment) condition. Their average alloy composition is basically identical. For each property being compared, the top bar is ASTM A285 grade B and the bottom bar is ASTM A36 carbon steel.

ASTM A285 Grade C steel plate-News-Henan Gnee Steel …

ASTM A285 Grade C steel plate/A285 Gr.C/A285C vessel plates boiler steel sheets . ASTM A285 Grade C/A285 Gr.C/A285C vessel plates boiler steel sheets are low to intermediate yield steel for use in non critical pressurised service to fabricate low pressure storage tanks, boilers and vessels rather than high pressurised vessels.

ASTM A285 Steel plate,ASTM A285 Steel pipe - Steel ...

ASTM A285. The ASTM A285 specification covers low to intermediate tensile strength carbon steel for use in non–critical pressure vessel applications. The plate is used as a weldable material in the fabrication of pressure vessels and industrial boilers using fusion welding i.e. the joining of the material by melting them together to form one.

ASTM A285 Grade A Carbon Steel :: MakeItFrom

ASTM A285 grade A is a type of ASTM A285 carbon steel. Cited properties are appropriate for the as-fabricated (no temper or treatment) condition. It has the lowest strength and highest ductility compared to the other variants of ASTM A285 carbon steel.

ASTM A283/ ASME SA283 PVQ Steel Plate | BBN Steel

SA283 is a structural carbon steel plate utilized for applications requiring low or intermediate tensile strength. This grade is used in the manufacture of storage tanks and low pressure, temperature controlled vessels. Request Info.

ASTM A283 Steel Plate - A283 Grade C Plate | Leeco Steel, …

leecosteel› Steel Plate ProductsASTM A283 plate steel features low and intermediate tensile strength carbon steel plate of structural quality. Please call Leeco Steel at 1-888-828-7897 to be connected to a member of our sales team who can share more information about A283 plate steel. ASTM A283 Chemical Composition[PDF]

Plate Specification Guide 2015-2016 - …

2015-2016 Plate Steel Specification Guide – Page 5 ASTM Specifications continued SPECIFICATION A283 Grade C A283 Grade D A285 Grade A A285 Grade B A285 Grade C Type of Steel Carbon Carbon Carbon Carbon Carbon Requirements for Delivery A6 A6 A20 A20 A20 Tensile Strength (ksi) 55/75 60/80 45/65 50/70 55/75 Yield Strength (Min. ksi) (Yield Point ...

SA285 Grade C Boiler steel plate,A285 Grade C pressure ...

Under ASME SA 285/SA 285M, boiler steel plate SA285 Grade C is equal to steel grade ASTM A285 Grade C pressure vessel steel plate.The main differnence for these three carbon steel grades of SA285 Grade A,SA285 Grade B and SA285 Grade C is their yield strength and tensile strength. For pressure vessel steel plate SA285 Grade A,minimum yield...

ASTM A285, Grade B - MatWeb

The maximum plate thickness under ASTM A285, for reasons of internal soundness, is 2 in. [50 mm] for all grades. For killed carbon steels only refer to the following ASTM specifications: A299/A299M Manganese-silicon carbon steel pressure vessel plates.

ASTM A285 Grade B - Steel - Matmatch

See the chemical composition and physical properties of ASTM A285 Grade B, find alternative materials, and connect with suppliers.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.