Tel: +86-371-86151827

a841 gr d steel plate chemical composition

Steel grade:a841 gr d steel plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a841 gr d steel plate chemical composition Introduction

ASTM A841 steel plate Chemical composition - pressure ...

ASTM A841 steel plate Chemical composition, steel,Hot sell ASTM A841 steel plate Chemical composition, pressure vessel steel plate grades stock in China,China ASTM A841 steel plate Chemical composition, pressure vessel steel plate grades factory.

ASTM A-841/A-841M,ASTM A-841/A-841M TMCP steel …

A841 is a kind steel plates used to fabric multilayer pressure vessels. A841 steel plate is produced by TMCP process. A841 steel chemical composition : ① If the carbon equivalent of the heat analyse is not more than 0.47%, the Mn composition of the heat analyse can …

A841 Class4 - steel-grades

This page provides A841 Class4 datasheet, A841 Class4 mechanical properties, chemical element A841 Class4, technical specifications of A841 Class4 steel material properties. A841 Class4 performance specifications.

Standard Specification for Steel Plates for Pressure ...

This specification covers steel plates produced by the thermo-mechanical control process (TMCP). The plates are intended primarily for use in welded pressure vessels. The steel shall be killed and shall conform to specified fine austenitic grain size and chemical composition requirements.

ASTM A841 Grade A - Steel - Matmatch

See the chemical composition and physical properties of ASTM A841 Grade A, find alternative materials, and connect with suppliers. This website uses cookies to improve service quality. You will find more information about cookies on the privacy policy page.

ASTM A841 - Structural steel for DIN,EN,AISI,JIS,BS,NFA ...

This is low alloy and high strength steel of Structural steel in the United States, we can produce plate, flat, belt, sheet, wire coil, square bar, round rod, pipe,forged valve body, forged rings, forged multidiameter shafts etc for this steel

SA841 Grade F steel plate Chemical composition - pressure ...

ASME SA285 Grade B steel plate distributor is the main pressure vessel steels of Henan Bebon Iron & Steel Co., Ltd. ASME SA841 Gr.E steel plate specification. A841 Gr.D steel plate dealer ASME SA517 Grade P steel plate Chemical composition. ASME SA302 Grade C steel plate Chemical composition. ASTM A515 A515M steel plate supplier. prime[PDF]

High Strength Steel Plates with Excellent Toughness for ...

High Strength Steel Plates with Excellent Toughness for Tanks and Penstocks Applying Thermo-Mechanical Control Process (TMCP) A537, wide application as TMCP steels is expected in the future. The strength classes of these steels are SA-841 Gr. A Cl. 1 steel (TS of 480 MPa class; TS: Ten- sile strength) and SA-841 Gr.

ASTM-A841 | Standard Specification for Steel Plates for ...

The steel shall be killed and shall conform to specified fine austenitic grain size and chemical composition requirements. If the plates are to be subjected to warm forming or post-weld heat treatment, the test coupons shall be subjected to heat treatment to simulate such fabrication operations. The tension test and notch toughness test requirements are presented in details. Two tension tests shall be made from each plate-as-rolled.[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

ASTM A633 Grade E is a normalized high-strength low-alloy structural steel plate for welded, riveted or bolted construction requiring superior notch toughness performance at low ambient temperatures. A633 Grade E has a minimum yield strength of 60 ksi [415 MPa] and may be ordered with supplemental Charpy V-notch impact test requirements.

ASTM A841 Grade B Plate, Thickness: 0-1 & 1-2 Mm | ID ...

Aesteiron Steels LLP - offering ASTM A841 Grade B Plate, Thickness: 0-1 & 1-2 Mm in Mumbai, Maharashtra. Read about company and get contact details and address. | ID: 10568248233Location: No. 107, Kika Street, 4th Floor, Gulalwadi, Bhuleshwar, 400004, Mumbai

ABS DH40 steel plate steel,ABS DH40 steel plate marine ...

ABS DH40 steel plate. Higher-strength ABS shipbuilding steel comes in 12 grades of 3 strengths, DH40 is one of the grades. The ABS DH40 grade steel plates have yield strength of 56,500 psi (390 MPa), and ultimate tensile strength of 74,000 - 94,500 psi (510-650 MPa). All the ABS DH40 shipbuilding Steel offered by Katalor Industry can be certificated...

A841 Gr.D Valve,A841 Gr.D flanges,A841 Gr.D Pipe Fitting ...

A841 Gr.D angle bars, A841 Gr.D flanges, Pipe Fitting, Steel Pipe, Heat Exchanger and Reducer, Gasket, Tee, Pipe Fitting, Tube Plate, have all specifications. With many yeas production experience, strict control A841 Gr.D chemical composition and A841 Gr.D mechanical properties.

ASTM A841 steel plate Chemical composition - pressure ...

ASTM A841 steel plate Chemical composition, steel,Hot sell ASTM A841 steel plate Chemical composition, pressure vessel steel plate grades stock in China,China ASTM A841 steel plate Chemical composition, pressure vessel steel plate grades factory.

SA841 Grade F steel plate Chemical composition - pressure ...

Keeps more than 10,000 tons hot rolled and cold rolled SA841 Grade F steel plate Chemical composition, pressure vessel steel plate grades in stock each month. We …

ABS DH40 steel plate steel,ABS DH40 steel plate marine ...

ABS DH40 steel plate. Higher-strength ABS shipbuilding steel comes in 12 grades of 3 strengths, DH40 is one of the grades. The ABS DH40 grade steel plates have yield strength of 56,500 psi (390 MPa), and ultimate tensile strength of 74,000 - 94,500 psi (510-650 MPa). All the ABS DH40 shipbuilding Steel offered by Katalor Industry can be certificated...

ASME SA517 prime quality pressure vessel plate Chemical ...

(SA387GR11CL2) Heat Exchanger Steel Plate . Chemical Composition ..... pressure vessel and boiler steel plate with Normalized and ... (SA537CL1) Heat Exchanger Steel Plate . Chemical Composition and Mechanical ... ASME SA517/SA517MSupply Super thick steel plate and high performance steel grade with prime quality. ... SA517 Gr.B steel plate.

alloy composition toughness sa612 gr a - myco-com.biz

Grade Heat treatment Grade Heat treatmentASTM A829 Steel Grades specification is the Standard Specification for Alloy Structural Steel Plates produced to chemical composition in thin sheets, .. intermediate tensile strength carbon steel plates) astm a283 grade a for steel sheet a841 grade d astm a841 grade e astm a841 grade fASTM

A841 GR B,A841 GR B Steel Plate,A841 GR B Supplier

6. Normally SA-841/SA-841M A841 GR B plates are normally supplied in the as-rolled condition. The plates may be ordered normalized or stress relieved, or both. 7. A841 GR B Delivery Time Or Lead Time: 20-35days 8. A841 GR B Extra Service: Pretreatment (Shot Blasting, Sand Blast, Painting and Galvanized), Cutting Parts, Sample Service, Third Party inspection, UT Test and Size inspection.

ASTM A 283 - Structural Steel Plates | Stainless Steel Plate

ASTM A283 - Low and intermediate Tensile Strength Carbon Steel Plates Reliable Steel Distributors is the Biggest Manufacturing Exporting and Supplying Of Steel Plate Suppliers, in India . One of the Biggest Exporter Steel Distributors and Processing Business In India Has Developed Into One Of The India Steel Plate Companies

BEBON steel - A36 steel plate

A36 steel plate chemical composition. Silicon, % - 0.40 0.40 0.15-0.40 0.15-0.40 0.15-0.40 Copper, min, % 0.20 0.20 0.20 0.20 0.20 0.20 Bebon International is a professional steel exporter and a steel Stockist in china. We keep more than 1000 tons A36 steel in stock every month. If you want to get the A36 steel price, please do not hesitate to .

ASTM A285 and ASTM A283 steel plate comparsion - AGICO

With 3 steel grades (Grade A, Grade B, Grade C) covering tensile strength range from 310-515Mpa,usually ASTM A285 steel plate is delivered as-rolled condition. made by killed, semi-killed, capped or rimmed steel practices according to the end users’ requirement.

Chemical Composition And Mechanical Properties of Steel ...

Chemical Composition And Mechanical Properties of Steel (Indian Standard) IS : 6240 HR - Steel Plate, Sheet and Coil for LP.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

100XF Temper Leveled Plate 100XF steel plate has been developed for applications where increased strength-to-weight ratios are required. It has physical properties similar to those of ASTM A514 even though its manufacturing process does not require heat treatment. 100XF is available as temper leveled, cut-to-length plate.

Welcome to JB Steel - jbsteelindia

Product Catalog :- SA240 TP321H Plates SA240 Grade 321H Plates : SA240 TP321H Plates Exporter Contact Us For High Quality SA240 TP321H Plates SA240 Grade 321H Plates. At JB Steel we pride ourselves on always putting the customer first.

ASTM A656 Grade 80|A656 Gr.80|A656 Gr80 steel plate…

ASTM A656 Grade 80|A656 Gr.80|A656 Gr80 steel plate. Gangsteel is specialized in supplying ASTM steel plate in A656 Grade 80 .For more information of A656 Grade 80 steel plates, please check them in following: Chemical composition % of the Product analysis of grade A656 Grade 60.

A841 Grade B Boiler and Pressure Vessel Steel in Kenya

ASTM A841 Gr.C offer pressure vessel plate mill-A537 Class ... ASTM A204 Grade B pressure vessel steel plate ...ASTM A204 specification covers molybdenum-alloy steel plates, which is particularly for welded boilers and high temperature pressure vessels.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.