Tel: +86-371-86151827

welding cylinders plate

Steel grade:welding cylinders plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

welding cylinders plate Introduction

Plate Rolling | Rode Welding Inc.

Rolled cylinders can be tack welded only or seams can be fully welded into single or multiple lengths. Rolled cylinder welds receive complete nondestructive examination as required. Rode Welding can roll cylinders from our own steel plate inventory, for quick delivery, or from customer supplied material.

welding a cylinder tangent to plane - eng-tips

eng-tips› …› DASSAULT: SOLIDWORKS 3D Design ForumNov 27, 2007· A cylinder tangent to a plate does not offer edges. If you really need to show a solid weld bead, you may have to create a sweep, but most times a weld bead hatch in the drawing views is sufficient. If you really, really need Weld Beads, you will have to cheat and create small flats on the cylinder to simulate edges.In SW07 Weld Beads need an intersecting edge or edges to be created. A cylinder tangent to a plate does not offer edges. If you really need to show a solid weld bead, you may have to create a sweep, but most times a weld bead hatch in the drawing views is sufficient. If you really, really need Weld Beads, you will have to cheat and create small flats on the cylinder to simulate edges.I would recommend just creating an extruded profile of the weld. Create it incontext and then insert it again for the other side of the plate. I am picturing fillet welds on boths sides of the plate. All the weld bead utility is... is a little function that auto creates an in-context part using an extrude or a sweep. -Dustin Professional Engineer Certified SolidWorks Professionalokay guys, thanks. It's not a crucial thing, but we are pretty new to SW here and I wanted to check with some pros.

Rolled Cylinders - Halvorsen USA

Rolled Cylinders. Halvorsen USA fabricates rolled cylinders, both tacked only for your welding, and fully welded with ASME partial data (U-1) reports. We offer the same services for cones, segments, conical segments and cylinder segments.

Plate Rolling Machine Operation Procedure and Method ...

I. Preparation

Bise Welding - Steel Pipe Fabrication, Rolled Cylinders ...

Bise Welding fabricates steel pipe, rolled cylinders and mitered fittings to ASME specifications. Specializes in the fabrication of Large OD Steel Pipe for waterworks and other projects. Provides precision welding services as well as fabrication of rolled and welded used steel pipe, large OD pipe, vertical casings, and mitered fittings.

Seam Welding Services - Weld-Seam, Inc.

Weld Seam provides automated seam welding for sheets, plates, cylinders, cones, ovals, boxes, rings, and much more! We can provide TIG and MIG welded parts using a combination of hand and seam welding. Our capacity ranges from 1-2 (prototypes) all the way to production runs of 10,000 to 15,000 parts per month. We have a quality system and certified welders to meet all of our customer's ...

Rolled and Welded Cylinders - Alloy Engineering

Edge Prep, Seam Welding. Alloy Engineering provides plate roll-ups, shells and cylinders fully prepped for seam welding or welded complete. Ends may be provided beveled or machined to specification. Seam welding is to ASME Section IX, with U-Part stamps and documentation provided upon request

Welding cylinder hand trucks by AIE Company Inc.

Series 700 - Cylinder Hand Trucks Welding Cylinder Trucks Model: 701SC16. 700 Series Provides A Wide Range Of Utility For Handling Oxygen, Acetylene, Nitrogen, Helium, Argon And Other Gas Cylinders. Base Plates Are Designed For Hauling Boxes When Needed. 701Sc Is Equipped With Stair Crawlers For Delivering Cylinders Up And Down Stairs.

Wagner Plate Works | Quality Products & Service

Wagner Plate Works offers heavy steel fabricating, forming and rolling, custom plate welding and custom plate rolling. Wagner Plate Works has the Premier Custom Plate Welding facilities in Oklahoma, Texas and California. We also work on economizers, boilers, pressure vessels, pipe mill, weld x-ray, PVQ, submerged arc welding, shell and tube ...

Home | Rode Welding Inc.

Your Source for Rolled & Welded Cylinders. For over 65 years, Rode Welding has been Producing Rolled and Welded Cylinders, Custom Heavy Plate Steel Fabrications, Thermal Stress Relieving, Steel Burnouts, and Shot Blast/Paint Services.

T. J. Snow Resistance Welding Machinery, Supplies & Service

Learn More Advanced Cylinder Products (ACP) ACP manufactures quality dual and triple piston weld cylinders in a wide range of configurations and sizes. Learn More OHMA OHMA is Centerline’s air over oil weld cylinder ranging in sizes from 1-3/4″ to 2-5/8″ bore. Learn More

Welding Cylinders Plate-BBN STEEL sale steel - strat.in

Plate Rolling | Rode Welding Inc.Rolled cylinders can be tack welded only or seams can be fully welded into single or multiple lengths. Rolled cylinder welds receive complete nondestructive examination as required. Rode Welding can roll cylinders from our own steel plate inventory, for quick delivery, or from customer supplied material.

Fabricator of Rolled, Formed and Welded Steel Cylinders

Rolled and Welded Cylinders. The Halvorsen Company is a Fabricator of Rolled, Formed and Welded Steel and Alloy Cylinders. We also custom fabricate pressure vessel shells, pressure retaining industrial components, cones, rings, tank shells, custom shapes, elbows, transitions, lateral tees, mitered pipe fittings and segments.

Rolled & Welded Cylinders Suppliers - ThomasNet

thomasnet› Supplier DiscoveryFabrication and installation of rolled and welded cylinders. Materials include steel, stainless and aluminum. Capabilities including in-house and on-site welding, plasma burning and cutting, plate rolling, waterjet cutting, line boring, bending and CNC machining. ASME and AWS certified ...[PDF]

Fundamentals of Gas Cutting and Welding - CED …

The oxygen volume in a cylinder is directly proportional to its pressure. In other words, if the original pressure of a full oxygen cylinder drops by 10% during welding, it means 1/10th of the cylinder contents have been consumed. Oxygen cylinders are usually painted green and are screwed right handed. Oxygen Cylinder Valves

Fillet welds to cylinders | SOLIDWORKS Forums

forum.solidworks› …› Parts and Features› DiscussionsI don't use the weld features that often but I cannot seem to find a way to create a cosmetic fillet weld to join a cylinder to a planar surface - think a cylinder standing on a sheet and I want to weld around the bottom edge of the cylinder to the sheet - fairly common stuff.

Amazon: Welding Gas Cylinders

1-16 of over 1,000 results for "Welding Gas Cylinders" Showing selected results. See all results for Welding Gas Cylinders. 80 cu/ft 75% Argon 25% CO2 Welding Gas Cylinder Tank CGA 580 - FULL. by Kaplan Industries. $250.99 $ 250 99. FREE Shipping on eligible orders. 4.7 out of 5 stars 17.

Steel Plate Forming And Heavy Plate Fabrication Services

We can cold or hot form your sections to precise tolerances, with precision forming experience to 8” thick. We specialize in plate forming, trimming, fitting and welding cones, both concentric and eccentric. (ASME Certified welding) We will also form, trim, trial fit and ship cone and cylinder sections to you for your in house or field welding.

Rolled & Welded Steel Cylinders | The Chicago Curve

There are several ways to produce cylinders from metal plate. One of the most common ways is to use a plate roll. Whether the machine has two, three or four rollers, it is usually the case that a certain amount of straight tangent is left on each end after the … Continue reading Rolled and Welded Steel Cylinders Should Have No Points →

Oxy-fuel welding and cutting - Wikipedia

Oxy-fuel welding (commonly called oxyacetylene welding, oxy welding, or gas welding in the U.S.) and oxy-fuel cutting are processes that use fuel gases and oxygen to weld or cut metals. French engineers Edmond Fouché and Charles Picard became the first to develop oxygen-acetylene welding in 1903.Uses·

Welding Gas Cylinders | eBay

ebay› …› Welding Equipment› welding gas cylinderAll forms require a heat source and most also require some form of gas cylinder: Oxy-Acetylene Welding: Invented in the nineteenth century, this form uses two cylinders of welding gas: One cylinder of oxygen and another cylinder of acetylene. Gas from the two tanks mixes in a torch, and used with a welding rod to create welds.

Steel Pipe Fabrication, Rolled Cylinders ... - Bise Welding

Bise Welding fabricates steel pipe, rolled cylinders and mitered fittings to ASME specifications. Specializes in the fabrication of Large OD Steel Pipe for waterworks and other projects. Provides precision welding services as well as fabrication of rolled and welded used steel pipe, large OD pipe, vertical casings, and mitered fittings.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.