Tel: +86-371-86151827

316 stainless steel sheet cold rolled 2b surface

Steel grade:316 stainless steel sheet cold rolled 2b surface

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

316 stainless steel sheet cold rolled 2b surface Introduction

[PDF]

Stainless Steel – Surface Finishes - Stealth 316

Stainless Steel – Surface Finishes Introduction ... equipment, the lustre from a well polished sheet of stainless steel has strong sales appeal. In addition to the visual appearance of polished ... 2B The material is cold rolled, softened and de-scaled as in the case of the 2D finish and then

430 cold rolled 2b surface stainless steel strip

Surface Finishes. Cold Rolled Stainless Steel Sheet and Strip Cold Rolled Stainless Steel Sheet and Strip and degree, and application examples Thi;kne$$ (mm) SUS 430 SUS 304 SUS 316 SUS 410 2B finish is recommended for such applications as. stainless steel coil,stainless steel …

2B, 2D and BA Cold Rolled Finishes

What Are Cold Rolled finishes?

Stainless Steel Cold Rolled 2b Surface Plate ASTM 316 ...

Stainless Steel Sheet, Steel Sheet, Roofing Sheet manufacturer / supplier in China, offering Stainless Steel Cold Rolled 2b Surface Plate ASTM 316 316ti 316L, 400 Series Stainless Steel Round Rod/Ball/Bar, Stainless Steel Cold Rolled Seamless Pipe 304L and so on.

316/316L cold rolled stainless steel sheet - tm-steel

316/316L cold rolled stainless steel sheet TIME:2017-08-15. Product Introduction: 316/316L stainless steel. 316 316L steel is following the 304 stainless steel after the second most widely used. The only difference between them is the carbon content. This leads to a little difference between the two, but the overall use is the same.

2D Vs 2B Stainless Steel

SSINA: Stainless Steel: Finishes. 1 Finish is produced by rolling stainless steel that has been heated prior to 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls.

Quality Cold Rolled Stainless Steel Sheet & Hot Rolled ...

WUXI XINFUTIAN METAL PRODUCTS CO., LTD is best Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet and 304 Stainless Steel Sheet supplier, we has good quality products & service from China.

316 Stainless Steel Coil & Sheet | CostaSteel

CostaSteel company supply of 316 stainless coil, stainless sheet, steel coil price, steel sheet supplier and other metal, quality and cheap, strong production company, ordering quick and easy.

Cold Rolled Sheet | North American Stainless

Cold Rolled Sheet. NAS offers cold rolled annealed and pickled product in multiple finishes and dimensions. Our cold rolled sheet product is available in variable widths and lengths and as sheets and blanks that can be cut at the mill or at our various processing centers throughout the U.S.[PDF]

Guide to Stainless Steel Finishes

GUIDE TO STAINLESS STEEL FINISHES In the Eurostar Inter-national Railway Station at Ashford, England, stainless steel panels were extensively used for the control desks and refreshment area. The columns at Amstel-veen bus station in the Netherlands were clad with a pattern rolled stainless steel; an ideal surface for active pede-strian areas.

Metals Depot® - Stainless Sheet Type 316 | Shop Online!

316/316L Stainless Steel Sheet, is a popular grade of stainless where superior corrosion resistance is of primary importance. 316 Stainless sheet is widely used in marine and highly acidic environments, underwater equipment, surgical tools, food and pharmaceutical applications.The addition of molybdenum increases the corrosion resistance of 316 Stainless over the more economical 304 grade.

Stainless Steel Coil 316 2b Surface Finish, Stainless ...

Alibaba offers 349 stainless steel coil 316 2b surface finish products. About 74% of these are stainless steel sheets. A wide variety of stainless steel coil 316 2b surface finish options are available to you, such as jis, astm, and aisi.

AISI 316 surface 2B Stainless Steel Plate

2B, 2D and BA Cold Rolled Finishes - Australian Stainless Steel . Cold rolled finishes apply to flat products such as sheet or coil, with thickness less than about 2B is the most widely used stainless steel surface …

316L/904L 2b finish stainless steel sheet

316l Stainless Steel Sheet Price - Alibaba . Trade Assurance 316l decorative mirror finish stainless steel sheet price per 430 201 304 321 316L 310S 2507 317L 904L 2205 Hard Stainless Steel Sheet Price Per Kg cold rolled No.8/2b aisi stainless steel ss 316l sheet price to the kg.

Stainless Steel - Harbor Steel

Surface finishes on stainless steel sheets, strip, and plates are generally selected for appearance, although degree and extent of forming and welding should be taken into consideration. Where forming is severe, or much welding is done, it is often more economical to use a cold rolled finish and then polish. Unpolished Finishes

316L Stainless Steel Sheet 2B Mill Finish | Stainless Supply

316L stainless steel sheet 2B finish has a mill finish, which is smooth and NOT the brushed finish commonly seen on kitchen appliances. Our 316L stainless steel sheet 2B finish will not have a protective film to prevent scratching, so the 316L stainless steel will commonly have scratching (not gouging) from when it is cut to size, fabricated, shipped, etc.

316L cold rolled stainless steel coil - hmmetalmaterial

316L cold rolled stainless steel coil. About 316L material: 316L stainless steel commonly used in the pulp and paper equipment heat exchangers, dyeing equipment, film processing equipment, pipelines, coastal areas outside the building materials, as well as senior watch bracelet, case and so on.

stainless steel sheet plate - asiametalltd

2b surface stainless steel sheet Product Details . 310s stainless steel sheet ... Product Details . Hot rolled ASTM 304 4 x 8 stainless steel sheets Product Details . 316L 316 304 sheet plate stainless steel price per kg Product Details ... 304 cold rolled 4x8 stainless steel sheet Product Details 30 | 1 2. Asia Metal is a professional ...

Stainless Steel Sheet | NDE

Stainless Steel Sheet. ... Bright annealed is a bright cold rolled highly reflective finish. No 1/1D: Hot rolled, heat treated, pickled. 2B: A bright cold rolled finish not as highly reflective a a BA finish. 2E: Cold rolled, heat treated, mechanically descaled, pickled. ... 304/316 Cold Rolled Sheet. Mass of sheet (kg) for sheet size (mm x mm ...

China Cold Rolled 201 304 304L 316 Stainless Steel Sheet ...

Stainless Steel Sheet, 304 Stainless Steel Sheet, Stainless Steel Sheet Price manufacturer / supplier in China, offering Cold Rolled 201 304 304L 316 Stainless Steel Sheet, St37-2 Ss400 Hot Rolled Mild Steel Checkered Plate, Q235 Mild Low Carbon Steel Hot Rolled Steel Coil and so on.

What surface finishes are available on stainless steels?

What surface finishes are available on stainless steels? There are many different types of surface finish on stainless steel. Some of these originate from the mill but many are applied later during processing, for example polished, brushed, blasted, etched and coloured finishes. ... 2B . Cold rolled, heat treated, pickled, pinch passed. The ...

316/316L Sheet / Plate - Online Metal Store

316/316L Sheet / Plate. Stainless Steel Sheet T-316/316L also known as marine grade, provides corrosion and pitting resistance in more aggressive environments, making it ideal for applications involving salt water, acidic chemicals, or chloride containing media.

Quality Stainless Steel Sheet & Stainless Steel Plates ...

Stainless Steel Sheet. 4X8 304 Stainless Steel Sheet Metal Bright Annealed Customized. ASTM A240 304L Cold Reduced Steel Sheet Metal Stainless Steel 2B. Cold Rolled 304 2B Stainless Steel Sheets 4X8 , Thick Stainless Steel Plate. ASTM A240 316 Cold Rolled Stainless Steel Sheet 0.5 mm Corrosion Resistant. Request A Quote

Stainless Steel Sheet-Type 304-Type 316 - Cut2Size Metals

Stainless steel sheet is available in Type 304 and Type 316. Type 304 can be easily roll-formed or bent, and its excellent corrosion resistance and weldability make it one of the most popular grades. Type 316 is a high corrosion resistance alloy, providing greater resistance to pitting-type corrosion.

China SS304L 2b Surface Cold Rolled Stainless Steel Coil ...

Steel Coil, Stainless Steel Coils, SS316 Steel Coil manufacturer / supplier in China, offering SS304L 2b Surface Cold Rolled Stainless Steel Coil, Weather Resistant Steel Plate/Corten Steel Sheet/Corten Steel Plate, PPGI Galvanized Steel Coil/Prepainted Steel Coil/Color Steel Coil and so on.

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Cold rolled coil, strip and sheet are produced in all stainless steel types: austenitic, ferritic, duplex and martensitic. A wide selection of standard and special surface finishes provide a unique level of customization. Outokumpu offering includes semi-cold rolled surface RAP®2E: it is cold rolled, heat treated, mechanically descaled and ...

Stainless Steel 2B & 2D Sheet - Penn Stainless Products

Some of the common surface finishes for stainless steel sheet are described below. By bar the 2B finish is the most common non polished surface finish for cold rolled stainless steel sheet. Please feel free to submit a technical question or special request. Click the …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.