Tel: +86-371-86151827

304 large thickness stainless sheet plate

Steel grade:304 large thickness stainless sheet plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

304 large thickness stainless sheet plate Introduction

304 Stainless Steel Plate | Midwest Steel & Aluminum

304 Stainless Steel Plate. 304 Stainless Plate, the most widely used of the stainless and heat resisting steels. 304 stainless plate offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments Typical specifications for 304 Plate and 304L Stainless Steel Plate are ASTM A-240, ASME SA -240 and A666.

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Penn Stainless Products is a supplier and processer of stainless steel plate in over 30 grades, including 304/L,316/L,309/S, 310/S, duplex, 330 and many more.Stainless Steel Sheet · Polished Sheet

304 Stainless Steel Thickness Chart

Stainless Steel Gauge Conversion Chart. The decimal equivalents for sheet metal gauges are listed in the chart below. Please note that ASTM allows coil, sheet and strip thickness to vary from the nominal You will find that our inventory of 304 and 316L stainless steel is extensive.

Stainless Steel Sheet 304 Thickness

Speedy Metals Information for 304/304L Stainless Steel Sheet. 304/304L dual certified stainless sheet is a very low carbon "18-8" austenitic chromium-nickel The dual certified 304/304L sheet meets specifications for both 304 and 304L stainless steel, and may be Thickness - Inch, Gage, Tolerance*.

Stainless Steel Sheet and Plate Products | Atlantic Stainless

In our extensive line of products, we offer stainless steel sheets and stainless steel plates. Stainless steel sheet is typically sold in the annealed condition and is available in most grades. Our stainless steel sheets come in both a standard 2B finish and various polished finishes.

MetalsDepot® - T304 Stainless Steel Sheet

304 Stainless Steel Sheet, is the most popular and economical of the stainless steels. 304 Stainless Sheet offers good corrosion resistance to many chemical corrodents as well as industrial atmospheres and marine environments. 304 Stainless Sheet may become slightly magnetic when worked and is not heat treatable.California Residents: See Prop 65 Warning

304 Sheet / Plate, #4 Finish - Online Metal Store

304 Sheet / Plate, #4 Finish. The #4 finish is the brushed finish you see in most restaurants and professional kitchens. Stainless Steel Sheet T-304/304L is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability.

Stainless Steel Sheet | Action Stainless & Alloys

Stainless Steel Sheet Action Stainless stocks sized sheet in gauges of 10 thru 26. We also keep coils in stock so that we can cut to length for your non-standard lengths.

Stainless Steel Diamond Plate - 316L plate, 304/304L plate ...

Stainless Steel Diamond Plate. Catalog; Penn Stainless is one of the few service centers that stocks 316/316L stainless diamond plate along with the more common 304/304L stainless steel diamond plate. We stock a full range of pattern sizes that can ship same day.

Stainless Steel Blanks, Flats, Bars, Plates, and Sheet ...

Also find corrosion-resistant stainless steel plates and stainless steel sheet metal for your construction, architectural and parts fabrication projects in several sizes and alloy types, including 304 stainless steel. Search within results Filter. Previously Purchased. View Previously Purchased Products ... Thickness. Type here to refine ...

Stainless Sheet / Plate - Online Metal Store

Stainless Sheet / Plate 2B (milled finish) - general purpose cold rolled finish commonly used for all but exceptionally difficult deep drawing applications. #4 (brushed finish) - general-purpose finish is widely used for restaurant and kitchen equipment, storefronts and food processing and dairy equipment.

Stainless Steel Diamond Plate - 316L plate, 304/304L plate ...

Stainless Steel Diamond Plate. Catalog; Penn Stainless is one of the few service centers that stocks 316/316L stainless diamond plate along with the more common 304/304L stainless steel diamond plate. We stock a full range of pattern sizes that can ship same day.

Stainless Plate - Ryerson

Stainless Steel Plate Ryerson stainless steel plate come in a variety of thicknesses and tolerances. Stainless 304 & 304L stainless steel plate thickness is often used in stamped and machined parts for processing equipment while 316 & 316L stainless steel plate are employed by the chemical, marine and power transmission industries.

Stainless Steel Plate and Sheet | Stainless Plate and Sheet

We stock a variety of sizes and thicknesses of stainless plate and stainless sheet to meet your specifications. Our stainless steel plate & stainless steel sheet are both available in 304 & 316 stainless steel. Our stainless steel sheet is also available finished and polished on one side.

Stainless Steel Sheet | Stainless Sheet

Our stainless steel sheet is available in 304 & 316 stainless steel. Our stainless steel sheet is also available finished and polished on one side. Our stainless sheet has a high corrosion resistance and is manufactured for industrial and harsh environments. We also carry a full line of stainless steel fittings.

304 Stainless Steel Plate 3mm Thickness Wholesale ...

Alibaba offers 2,563 304 stainless steel plate 3mm thickness products. About 80% of these are stainless steel sheets, 1% are steel pipes, and 1% are gauges. A wide variety of 304 stainless steel plate 3mm thickness options are available to you, such as astm, jis, and aisi.

ASTM A240 304 Stainless Steel Plate | Buy Online | Cut to ...

Buy Metal Online – ASTM A240 304 Stainless Steel Plate – Order Large or Small Quantity Online – Cut to Size Stainless Plate – No Minimum Order

Stainless Steel Sheet | eBay

ebay› …› Metals & Alloys› Metal Sheets & Flat Stock1pc 100mm X 1m Silver 304 Stainless Steel Fine Plate Sheet Foil 0.2mm Thickness. ... 24ga 304 #4 Stainless Steel Sheet Plate 24 x 48""Why buy a full length when all you need is a remnant?. $36.00. ... Material will be grade 304/316. Sizes vary as well as thickness(22ga to 11ga). Pieces are slightly scratched and dusty.

Stainless Steel Sheet-Type 304-Type 316 - Cut2Size Metals

Stainless steel sheet is available in Type 304 and Type 316. Type 304 can be easily roll-formed or bent, and its excellent corrosion resistance and weldability make it one of the most popular grades. Type 316 is a high corrosion resistance alloy, providing greater resistance to pitting-type corrosion.

304 Stainless and 304L Stainless Steel Sheet & Bar - AMS ...

304 / 304L stainless steel, also known as 18/8 stainless and often referred to as 302, is the most common stainless steel. 304 stainless steel contains a higher chromium and lower carbon content than other variations of type 302. It can be used in an "as welded" condition, while 302 must be annealed. AISI 304 is used in a variety of household and industrial applications.

Stainless Steel Blanks, Flats, Bars, Plates, and Sheet ...

Also find corrosion-resistant stainless steel plates and stainless steel sheet metal for your construction, architectural and parts fabrication projects in several sizes and alloy types, including 304 stainless steel. Search within results Filter. Previously Purchased. View Previously Purchased Products ... Thickness. Type here to refine ...

Metric Sheet 304 Stainless Steel | Metric Metal

North America's largest supplier of 304 stainless steel metric sheets. ... STAINLESS STEEL SHEET 304. Thickness (mm) ... 304, 316, 409, 420 & 430 Cold Rolled Stainless Sheet; Thickness Tolerance Specified Width; Equal To Less Than ≤ 1000 1000< thru ≤ 1300 1300 < thru ≤ 2100

Stainless Steel Plate Type 304 and Type 316/316L

Stainless steel plate is available in Type 304 and Type 316/316L. Type 316 is a high corresion resistance alloy. Typical uses include marine, chemical, and food service applications.

304 Stainless Steel Sheet #8 Mirror | Stainless Supply

304 stainless steel sheet #8 mirror has a non-directional finish that virtually looks like a mirror. 304 stainless steel sheet #8 mirror possesses a highly polished finish and does not contain or have a coating or finishing material to give it reflectivity. 304 stainless steel sheet #8 mirror comes with a double layer of PVC film to protect the mirror finish during fabrication and installation.

Stainless Steel Plates Suppliers,Dealers,Manufacturer in ...

steelplates.in› Stainless Steel Sheets, Plates, CoilsBeing one of the biggest stockholder for stainless steel plates, we have large stock of 304, 304l, 316, 316l, 310s, 309s, 321, 904l, also including 200 series and 400 series. We can supply cut to size stainless steel plates , with both narrow and wide widths.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.