Tel: +86-371-86151827

steel plate sae 1008

Steel grade:steel plate sae 1008

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

steel plate sae 1008 Introduction

ASTM SAE 1008 steel plate - Katalor Industry

ASTM-SAE SAE 1008 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's yield strength is between 170 to 320 MPa (there is different min strength point at the different thickness.) A 621 DQ - SAE 1008 tensile strength is from around 420 MPa. (different min strength point at the different thickness.)

SAE 1008 steel - steel-grades

21 rows· Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. …GRADESTANDARDCOUNTRYAPPLICATIONY1Cr18Ni9GBChinaImprove the machinability, ablation resistance. Suita…1Cr18Ni9GBChinaHigh strength after cold forming, but elongation tha…1Cr18Mn10Ni5Mo3NGBChinaOf urea with good corrosion resistance, can produc…1Cr17Ni7GBChinaHigh strength after cold forming. Used in railway veh…See all 21 rows on steel-grades

Steel Plate SAE 1008 - carbon-steeltube

we promise we can offer you the qualified Steel Plate SAE 1008 at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many Steel Plate SAE 1008 stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you be the No.1 in your local steel market.

AISI 1008 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 1008 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

SAE 1008 carbon steel,SAE 1008 ... - steel-plate-sheet

BEBON can supply SAE 1008 carbon steel, as a SAE 1008 carbon steel supplier in China, any need in SAE 1008 carbon steel or want to konw more inforamtion about SAE 1008 steel Applications, pls contact us or send e-mail to us.

AISI 1008 Carbon Steel (UNS G10080) - AZoM

Topics Covered

SAE-AISI 1008 (G10080) Carbon Steel :: MakeItFrom

SAE-AISI 1008 steel is a carbon (non-alloy) steel formulated for primary forming into wrought products. 1008 is the designation in both the SAE and AISI systems for this material. G10080 is the UNS number. It has the highest thermal conductivity among wrought carbon or non-alloy steels.

Discount Steel – Steel Sheet and Plate: A36, 1008, A606 ...

Buy Metal Online – Steel Sheet and Plate – Order Large or Small Quantity Online – Cut to Size Steel Sheet and Plate – No Minimum Order

Rolled Metal Products | Stainless, Aluminum & Specialty ...

Carbon Steel 1008. AISI 1008 Steel (UNS G10080) Description. AISI 1008 is a low-carbon steel containing approximately 0.40% manganese that has excellent weldability and formability. AISI 1008 carbon steel is primarily used in extruded, cold headed, cold upset, and cold pressed parts and forms.

Cold Rolled 1008/1010 Steel | Mead Metals in Minnesota

Cold Rolled 1008/1010 Steel Product Specifications. Mead Metals Inc. carries cold rolled steel per ASTM A1008 and AISI 1008/1010 grades. We offer ranges of sizes and quantities to fit your project’s needs. We accommodate both high and low volume cold rolled steel orders.

SAE1008 steel plate - BEBON INTERNATIONAL

ASTM-SAE A621DQ-SAE1008 steel plate/sheet is stamping and cold forming steels,which is according to ASTM-SAE standard,and based on the different thickness,the tensile strength of A621DQ-SAE1008 is 420MPa.The ASTM-SAE A621DQ-SAE1008 is also equal to DIN1614:RRSTW23, JISG3131:SPHE and EN10111:DD12 steel.

carbon steel plate sae 1008 - alibaba

Alibaba offers 414 carbon steel plate sae 1008 products. About 2% of these are steel wire, 1% are steel round bars. A wide variety of carbon steel plate sae 1008 options are available to you, such as aisi…

Aisi 1008 Carbon Steel Plate Wholesale, Carbon Steel ...

Alibaba offers 534 aisi 1008 carbon steel plate products. About 78% of these are steel sheets, 1% are stainless steel sheets. A wide variety of aisi 1008 carbon steel plate options are available to you, such as aisi, astm, and din.

AISI 1008 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 1008 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Plate 1008 - Benjamin Steel

Thickness in Inches Widths Lengths Lbs/Sft 3/16: 48, 60: 120, 144: 7.660: 1/4: 48, 60: 120: 10.210: 5/16: 48: 120: 12.760: 3/8: 60: 96, 120: 15.320

1008 vs 1010 Steel Comparison | Capital Steel & Wire

1008 vs 1010 Steel Comparison The following is a comparison of the chemical composition and mechanical properties of 1008 steel and 1010 steel. This may be useful for machining purposes or when making purchases of either steel grade.

Cold Rolled 1008 Steel Sheet & Plate - mkmetal.net

: M & K Metals is an industry leading provider of premium quality steel sheet & plate products for your project requirement needs. Contact us to learn more.

AISI-1008 - jfs-steel

Along with steel bars, steel plates and steel tubes supply, steel cutting, drilling, machining and heat treatment services are also provided. JFS Steel has been offering customers special steel materials such as AISI-1008 Carbon Steels for Machine Structural use and precision steel …

The Science of Forming - Do You Use 1008/1010-Grade Steel ...

The new steel arrives with a much higher carbon level of 0.10 percent. The yield strength is higher and the n value is significantly lower. The stamping tears. In answer to a complaint, the steel supplier states that the order was 1008/1010-grade steel and that the shipment was 1008/1010-grade steel.[PDF]

General purpose and commercial steels

SAE 1008 0,10 max 0,50 max 0.030 0.035 SAE 1010 0,08 - 0,13 0,30 - 0,60 0.030 0.035 SAE 1018 0,14 - 0,20 0,60 - 0,90 0.030 0.035 Data Sheet: A2.1 General purpose and commercial steels Hot Rolled Steel Plate and Coil for General Applications . For further information, contact: ... Hot rolled commercial steel plate and coil are produced to the ...

A366/1008 Mild Steel (available in Sheet) - OnlineMetals

Copper Sheet / Plate; Copper Flat Bar; Copper Round Tube; Copper Round Bar; View All Types; Cold Roll. Cold Roll DOM A513 Tube; Cold Roll 4130 Tube Round; Cold Roll 4130 Sheet; Cold Roll 1018 Flat Bar; Cold Roll 4130 Round Bar; View All Types; Hot Roll. Hot Roll Square Tube; Hot Roll A36 Flat Bar; Hot Roll A36 Angle; Mild Steel Sheet / Plate ...

Cold Rolled 1008/1010 Steel Physical & Chemical Properties

View the physical and chemical properties of the various cold rolled steel alloys we carry. Don't see something? Request a quick quote and we'll try to get it. ... COLD ROLLED 1008/1010 STEEL Physical & Chemical Properties. Here are the physical and chemical properties of the 1008/1010 carbon steel that we regularly stock. Cold Rolled 1008/1010 ...

ASTM A366 1008 AISI1008 SAE1008 Steel - SAE AISI 1010 …

It has a very good surface finish that is far superior to hot rolled A36. 1008 Steel is an economical, general purpose steel grade offering moderate strength and toughness. As a standard grade, 1008 steel is used in many common, low-stress applications. The term steel refers to iron in which 0.02 to 1.7% carbon has been added.

Amazon: Steel - Metals & Alloys: Industrial ...

Steel bar, as opposed to steel tubing, has edges, and is used in the cement, military equipment-manufacturing, machining, and ship-building industries. Steel can meet standards such as American Iron & Steel Institute (AISI), and comes in different widths, lengths, thicknesses, and tolerances.

Steel Sheet & Plate - Industrial Metal Supply

Industrial Metal Supply is your #1 source for steel sheet and plate. We can provide cold rolled steel sheet and cold rolled steel plate in the size and gauge you need, including custom cut-to-size pieces. Contact us for steel sheet, plate, and much more.[DOC]

ASTM SAE 1008 steel supplier - ice-steels

· Web viewS max. SAE 1008 0.10 -- 0.45 0.035 0.035 ASTM-SAE SAE 1008 steel plate/sheet is stamping and cold forming steels,it is suitable for non-structural press work and forming.It's yield strength is between 170 to 320 MPa (there is different min strength point at the different thickness.) A 621 DQ - SAE 1008 tensile strength is from around 420 MPa.

C1020 Steel Plate- AISI 1020 Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsLeeco Steel has a large inventory of C1020 steel plates that are avaialbe and used for any application. Please call today & connect with a team member for information. Home; ... C1020 Steel Plate. Please call Leeco Steel at 1-888-828-7897 to be connected to a member of our sales team who can share more information about C1020 steel plate.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.