Tel: +86-371-86151827

carbon steel plates astm asme a

Steel grade:carbon steel plates astm asme a

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

carbon steel plates astm asme a Introduction

ASTM A36 Steel Sheets, ASTM 36 Carbon Steel Plates, A36 …

ASTM A36 Sheets, Carbon Steel A36 Cold Rolled Plates, ASME SA A36 Shim Sheets, A36 Carbon Steel Slatting Coils, A36 Carbon Steel Hot Rolled Sheets Stockists & Exporter Aspirinox Alloys Inc is a recognized manufacturer supplier and exporter of A36 Steel Sheets & Plates .Specialize: Shim Sheet, Perforated Sheet, B. Q. Profile.

ASTM A572 Grade 50 Steel Plate ,ASME SA 572 GR.50, ASTM ...

ASTM A572 Grade 50 Carbon Steel Plate is mainly used for bridge plates,gusset plates,base plates and structural steel stiffeners. Carbon Steel ASME SA572 Grade 50 Plates are intended for riveted, bolted, or welded structures primarily in applications where extra strength or reduced end product weight is desired without foregoing strength.

Carbon Steel Plate

The plate mill has the capacity to produce up to 160 inch wide plates with thicknesses ranging from 1/4 to 6 inches. The annual capacity is 1.2Mil tons. Company procedures conform to all applicable standards, including ASTM, ASME, API, DIN, and JIS.

ASTM A131 Grade D Steel Plate ,ASTM A131 GR.D, ASME SA …

Carbon Steel ASME SA131 GR.D Shipbuilding Steel Plates grdae d common strength steel plate for hull constructions. ASTM A131 GR.D SBQ Steel Plates owned the yield strength above 235 Mpa,but the Low temperature impacting test shall be done at zero centi degree.

SA516 Gr 70 Carbon Steel Boiler Plate Suppliers and ...

ASTM A516 Grade 70 Carbon Steel Boiler plate, ASME SA 516 Gr.70 Plate, SA 516 Gr. 70 NACE MR 1075 Steel Plates Exporters, Suppliers and Stockists in India. Our plates are known to offer maximum utility in all environments of use. NACE MR0103 plates are reliable and built from the finest quality of raw materials. Our plates are popular for their precision finishing. All our SA 516 Gr. 70 plates are HIC …

ASTM A285 Grade C Carbon Steel Pressure Vessel and Boiler ...

ASTM A285 Grade C Carbon Steel plate, ASME SA285 Gr.C Pressure Vessel Steel Plate Exporters, Suppliers and Stockists in India. Champak steel manufacturer, trades and supplies high quality ASTM A285 Grade C plates worldwide. We have developed products that are highly-reliable and provide amazing reliability in all kinds of use.

Steel Plate Products - Alloy & Carbon Steel Plates ...

Steel plate specifications include, but are not limited to pressure vessel quality (PVQ), chrome-moly, API, ABS, AISI & ASTM from 3/16” up to 12” thick. Specialty requests are welcome outside of the standards listed, as Universal can supply mill direct solutions from sources around the world.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon …

Carbon Steel Plate. Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Carbon and Alloy Steel Pipe Flange in ASTM A105, A182

Pipeline Flange are commonly used for carbon steel, alloy steel and stainless steel. Frequently used material as below: Carbon steel: STM A105 Alloy steel: ASTM A182 F11, F22, LF2 Stainless steel: 304/L, 316/316L. We supply carbon, alloy, stainless steel pipe flange in different dimensions and pressures. Octal Supply flanges in below ranges:

ASTM A36 / A36M - 14 Standard Specification for Carbon ...

This specification covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper.

A36 | CARBON | In Stock | Castle Metals Site

One of the most popular and widely used steel plates, A36 (ASTM A36, ASME SA36) is a versatile carbon steel with excellent forming and welding characteristics. If A36 plate is carburized first it can be case or flame hardened.

ASTM A131 Grade D Steel Plate ,ASTM A131 GR.D, ASME …

Carbon Steel ASME SA131 GR.D Shipbuilding Steel Plates grdae d common strength steel plate for hull constructions. ASTM A131 GR.D SBQ Steel Plates owned the yield strength above 235 Mpa,but the Low temperature impacting test shall be done at zero centi degree.

ASTM A 285/A283 Grade C Sheets and Plates, A285 Gr.C ...

A285 / A283 Grade C Sheets and Plates ASTM A 285 / A283 Grade C Sheets and Plates, ASME A 285 / A283 Grade C Sheets and Plates Pressure Vessel Steel Plate Exporters, Suppliers and Stockists in India.

ASTM A516 Grade 60 Plate, ASME A516 GR. 60 Carbon Steel ...

ASME SA516 GR. 60 Plate Distributors, Carbon Steel Plate, ASTM A516 Gr 60 Boiler Quality Plate, Hot Rolled Steel ASTM A516 Gr 60 Plates, Moderate and Lower Temperature Service ASTM A516 Plates Stockholders in Gujarat.

ASTM A283, ASTME A283, ASME SA285 - Boiler and Carbon ...

ASTM A285 / ASME SA283 Boilers And Pressure Vessels Steel Plate, SA285 BQ Plates, ASTM A283 Steel Plate . Boiler ASTM A283 Plates is designed with a combination of impact toughness resistance to chloride stress corrosion cracking, and pitting and crevice corrosion with strength that is twice that of the stainless steel series.

Carbon Steel ASTM A515 / A516 Sheets & Plates …

Carbon Steel Sheets & Plates Biggest stockist and supplier of Carbon Steel Sheets & Plates. ASTM / ASME A 515 / 516 GR. 60/70, IS 2062, IS 2002, A 283 Gr C, A 285 Gr C Sheets and Plates.

Carbon Steel Plates for Pressure Vessels - AZoM

Carbon Steel Plate. Masteel supplies superior quality carbon steel plate for boiler and pressure vessel fabrication which is perfectly suited to the high standards set by the oil, gas, and petrochemical sectors, which is why they stock a wide range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Carbon Steel Plates, Sheets & Coils - Amardeep steel Centre

ASTM / ASME A 516 / A283 Carbon Steel Plates, Sheets & Coils Manufacturer, Exporter & Suppliers. Carbon Steel Shim Sheet, Carbon Steel Chequered Plate, Carbon Steel Coils, Circles Suppliers in India. We are one of the leading Manufacturer, Exporter and Supplier of Carbon Steel Plates, Sheets & Coils.

Steel Plate Products - Alloy & Carbon Steel Plates ...

Steel plate specifications include, but are not limited to pressure vessel quality (PVQ), chrome-moly, API, ABS, AISI & ASTM from 3/16” up to 12” thick. Specialty requests are welcome outside of the standards listed, as Universal can supply mill direct solutions from sources around the world.

Steel plate supplier--Katalor steel

provide steel plate,steel pipe,stainless steel,profile steel under the ASTM,JIS,DIN,ASME,EN,etc. Deep processing of steel specialized in producing standard and non-standard mechanical parts by cutting, stamping, welding, sheet metal, CNC machining, mould design & manufacturing process etc.

ASTM A516 Grade 70 and ASME SA516 Grade 70 Carbon Steel Plate

Masteel supply high quality carbon steel plate for boiler and pressure vessel fabrication which is ideally suited to the high standards set by the oil, gas and petrochemical industry - this is why we stock an extensive range of carbon plates according to ASTM A516 Grade 70 and ASME SA516 Grade 70.

Carbon Steel Flanges, ASTM A105 Slip on Flanges, Carbon ...

Manufacturer Of A105 Carbon Steel Plate Flange, Best Price of ASTM A105 WNRF Flanges Exporter, Stockholder Of Carbon Steel RTJ Flange, ASME SA105N Carbon Steel Class 300 Flange Wholesaler, Carbon Steel A105N Flat Flange, ASTM A105 Carbon Steel EN 1092-1 Flanges Traders in India.

ASTM A515 Grade 60 Carbon Steel Plates ... - ganpatind

ASTM A515 Grade 60 Shim Sheet Manufacturer, ASTM A515 Gr 60 Plate Stockholder, ASTM A515 Grade 60 Carbon Steel Polished Plates, ASTM A515 Grade 60 Pressure Vessel Plates, ASTM A515 Grade 60 Plates Stockist, Distributors Of ASTM A515 Grade 60 Carbon Steel Plates Suppliers in India.[PDF]

SPECIFICATION FOR PRESSURE VESSEL PLATES, …

Requirements for Carbon Steel Plate for Hydro”uoric Acid Alkylation Service S54.1 Plates shall be provided in the normalized heat- treated condition. S54.2 The maximum carbon equivalent shall be as follows: Plate thickness less than or equal to 1 in. [25 mm]: CE …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.