Tel: +86-371-86151827

low alloy carbon steel plate checkered

Steel grade:low alloy carbon steel plate checkered

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

low alloy carbon steel plate checkered Introduction

Low Alloy Steel Plate Prices Of Mild Chequered

ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material.

ASTM A786 Hot Rolled Steel Plate, ASTM A786 Checkered ...

ASTM A786 Steel HR Plates which is widely used in many areas such as shipbuilding, construction, bridge building, offshore project etc. ASTM A786 Hot Rolled plates are used for flooring on docks, ramps, mezzanines, stair treads and other surfaces that require skid resistance with an easy to clean surface.ASTM A786 Floor Plate is a low carbon commercial quality grade plate.

High Strength Low Alloy Steel Plate - INFRA-METALS

This application covers carbon steel plates of low and intermediate-tensile strength and is intended for fusion-welded pressure vessels. The plates are available in three grades having different strength levels. ASTM – A515 – Standard specification for pressure vessel plates, carbon steel, for intermediate-and-higher-temperature service.

Carbon Steel Plate Manufacturer and Supplier | Superior Steel

Carbon Steel Plates. Carbon Steel Plates has been defined as a metal sheet with a thickness of .2300" or more; Carbon Steel Sheets is defined as metal that is thicker than foil and less than .2300".Due to its higher thickness, CS Plates is used for products that require durability and strength but do not require the lower weight of a thinner metal sheet.

Classification of Carbon and Low-Alloy Steels

Carbon Steels

Chequered Plates in Aluminum, Mild Steel, SS, Manganese …

ASTM A 633 Specification for Normalized High Strength Low Alloy Structural Steel Plate. ASTM A 653 Specification for Galvanized steel sheet ASTM B 695 Coatings of Zinc Mechanically Deposited on Iron and Steel. ASTM A 786 Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

Buy High Strength Low Alloy Plate From Top Steel Supplier ...

16 mn is a major steel grade of high strength low alloy steel plate in most industries, The consumption of this type is very large. Its intensity is higher than the ordinary carbon structural steel Q235 by 20% ~ 30%, atmospheric corrosion resistance by 20% ~ 38%. 15 MNVN is mainly used as medium strength steel plate. It is featured with high ...

Low Alloy Steel Plate Wholesale, Steel Plate Suppliers ...

Alibaba offers 9,021 low alloy steel plate products. About 42% of these are steel sheets, 1% are casting, and 1% are silicon steel. A wide variety of low alloy steel plate options are available to you, such as spring steel bar, coil, and plate.

Standard Specification for Hot-Rolled Carbon, Low-Alloy ...

1.1 This specification covers carbon, low-alloy, high-strength low-alloy, and alloy steel hot-rolled floor plates for flooring, stairways, transportation equipment, and general structural purposes. While it is generally provided in the as-rolled condition, floor plate also may be provided in the heat-treated condition, depending on the material specification.

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

Carbon Steel Plate|Alloy Steel Plate|Stainless Steel Sheet ...

Agico sells the most common steel plate: steel plate for boiler, linepipe steel plate, checkered steel plate made of carbon steel, alloy steel and stainless steels.

High Strength Low Alloy - Farwest Steel

Farwest invests in an extensive inventory of A572/709 plate in grades 42, 50, and 55 along with A588/709W. Domestic stock also available. Farwest understands that general grade specifications can be too broad for some plate specificaitons.

Steel Plates - Russel Metals

ASTM A 242 covers high strength low alloy steel shapes, plates and bars for welded, riveted or bolted construction intended primarily for use as structural members where saving in weight or added durability are important. ASTM A 515 Specification for Carbon Steel Plates for Pressure Vessels for Intermediate and Higher Temperature Servic

Low Alloy Steel Plate Prices Of Mild Chequered

ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material.

Low Alloy Carbon Steel Plate checkered - Henan BBN

Katalor is the professional Chinese Low Alloy Carbon Steel Plate checkered supplier .If you need Low Alloy Carbon Steel Plate checkered , we can put the Low Alloy Carbon Steel Plate checkered order to our steel mill directly or collect these goods from our stock directly if we have enough ex-stock .Besides. if you need any offer or if you want to know the price and any other information about ...

Low alloy steel plate|Low alloy plate---Steel plate--Xin ...

Low alloy steel plate also named as low alloy plate which mainly used to construct drilling machine ,Excavator,Tip lorry, Grab,Conweigh belt,Bulldozer ,all kinds of …

Carbon Steel Plate Manufacturer and Supplier | Superior Steel

Carbon Steel Plates. Carbon Steel Plates has been defined as a metal sheet with a thickness of .2300" or more; Carbon Steel Sheets is defined as metal that is thicker than foil and less than .2300".Due to its higher thickness, CS Plates is used for products that require durability and strength but do not require the lower weight of a thinner metal sheet.

Q345B alloy chequered steel plate - srilankasports.org

Q345b Alloy Steel Plate Checkered Steel Plate. Q345B,Q345B PLATE,Q345B STEEL. Steel grade Q345B is the most common used as high strength low alloy structural steel in industry area.Xinsteel can offer steel coils,steel plates,angles,channels for Q345B materials.The equivalent steel grade with Q345B are EN 10025-2 S355JR,ASTM A572/A572 A572 Grade 50 and DIN 17100 St52-3.

checkered ship building alloy steel plate - srilankasports.org

Q345 C steel checker plate for . Steel Q345 Plate,China Low Alloy High Strength Carbon Steel Plate (Q345) , high-strength steel plate, low-alloy steel plate, carbon structural steel plate, alloy structural steel plate, boiler and pressure vessel Find this Pin and more on Steel Plate-Discount Steel by Gnee Steel.

Checkered steel plate|Diamond plate|Chequered plate- …

Main application: With the antiskid and decorative character,Checkered steel plate is widely used in container sheet,shipbuilding, boiler, automobile and tractor, the train and architecture industries,such as floor board, factory stair boards, deck board, car boards ,staircases, lorry beds, elevator floors,etc.

Low alloy steel plate,Low alloy steel sheet---Xinsteel

Comparing carbon steel plate,Low alloy steel plate has a better mechanical properties and great resistance to atmospheric corrosion through adding some alloy elements when rolling.Low alloy steel plates are mainly used to manufacture the common constructure and construction drilling machine,Excavator,Tip lorry,Grab,Conweigh belt,Bulldozer,all kinds of Chain Block and other …

Steel Plate Products - Carbon & Heat Treated Steel Plate ...

Leeco Steel is an excellent resource for steel plate products such as carbon and heat-treated plate steel for any application needed. We distribute a variety of steel plate products including HSLA steel plate, military steel plate, AR steel plate and more. We offer various thicknesses, lengths, and widths to meet your specifications. Request a quote today!

Price Of Checkered Plate, Wholesale & Suppliers - Alibaba

A wide variety of price of checkered plate options are available to you, such as aisi, astm, and gb. You can also choose from plate, coil. As well as from hot rolled, cold rolled. And whether price of checkered plate is free samples, or paid samples. There are 6,647 price of checkered plate …

China ASTM A573 High Strength Low Alloy Steel Plate ...

Our main products cover carbon steel plate, alloy steel plate, wearing steel plate, weathering steel plate, cladding steel plate, checkered steel plate, stainless steel products, aluminium steel products, etc. For boiler steel plate, we have more than 10 production lines. We offer the service of …

China Low Alloy Steel Plate suppliers, Low Alloy Steel ...

China Low Alloy Steel Plate suppliers - Import from verified top China Low Alloy Steel Plate manufacturers, exporters, wholesalers and factory. Select and compare a wide range of high quality Chinese Low Alloy Steel Plate on GlobalSources

Carbon steel plate Manufacturers & Suppliers, China carbon ...

carbon steel plate manufacturer/supplier, China carbon steel plate manufacturer & factory list, find qualified Chinese carbon steel plate manufacturers, suppliers, factories, exporters & wholesalers quickly on Made-in-China.

Carbon Steel | Tampa Bay Steel

This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. The plates are available in four grades each having different strength levels. ASTM A514. Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.