Tel: +86-371-86151827

stainless steel plate304 304l high temperature

Steel grade:stainless steel plate304 304l high temperature

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

stainless steel plate304 304l high temperature Introduction

304 / 304L Stainless Steel Sheet - T304 / T304L Sheet | O ...

onealsteel› Stainless Steel› Sheet304 / 304L stainless steel sheet is used to manufacture stamped and machined parts for parts and products in corrosive and high heat applications. The stainless steel exhibits high corrosion resistance, high strength and temperature resistance. It can be become slightly magnetic when cold worked. It is easy to machine, stamp and weld.

Home [krdtsteel]

About 304 material:304 stainless steel is a common stainless steel material, the density of 7.93 g/cm3, the industry is also called 18/8 stainless steel.High temperature resistance of 800 degrees, with good processing performance, high toughness characteristics, widely used in industrial and furniture decoration industry and food industry.

304/ 304L stainless steel sheet - deysteel

304 stainless steel is a common stainless steel material, the density of 7.93 g/cm3, the industry is also called 18/8 stainless steel. High temperature resistance of 800 degrees, with good processability, high toughness characteristics, widely used in industry and furniture …

316 / 316L Stainless Steel Plate | O'Neal Steel

onealsteel› Stainless Steel› Plate316 / 316L stainless steel plate provides more effective corrosion and pitting protection than 304 stainless steel due to increased levels of molybdenum and nickel in the alloy. It exhibits the same high strength, toughness, high temperature and high workability as 304 stainless alloy plate. Applications.

Stainless Steel Plate - 304, 304L, 316, 316L, 310 and more ...

Stainless Steel Plate. Penn Stainless Products stocks over 30 grades of stainless steel plate–in 300 series stainless, 400 series stainless, high temperature stainless grades, precipitation hardening, duplex stainless steel grades and some nickel alloys. Sizes range from …

What is the Temperature Range for 304 Stainless Steel vs ...

Temperature Tolerances for Grade 316 Stainless Steel. The temperature tolerance of grade 316 stainless steel is close to that of grade 304, being just a little bit lower. As stated in an AK Steel data sheet for grade 316 stainless steel, the melting range of 316 SS is 2,500 ° F – 2,550 ° F (1,371 ° C – 1,399 ° C),...

Home [krdtsteel]

About 316 material: 316 stainless steel by adding Mo element, the corrosion resistance, and high temperature strength has greatly improved, high temperature can reach 1200-1300 degrees, can be used in severe conditions.Corrosion resistance is better than 304 stainless steel, in pulp and paper production process has good corrosion resistance. And 316 stainless steel is also resistant to erosion ...

304L Stainless Steel Plate | Clinton Aluminum

304L Stainless Steel Plate. 304 stainless steel is safe for use in most of welded construction operations that limit the service temperature to 800 degrees F. Heat treatment can’t be used to harden this alloy. Because this metal has a high resistance to corrosion, it is commonly used to fabricate parts that are used to handle citric...

Alloy 304/304H Austenitic Stainless Steel Plate ...

Alloy 304/304H (UNS S30400/ S30409) is a modification of the most widely utilized "18-8" chromium-nickel austenitic stainless steel. The carbon content is controlled in the range of 0.04-0.10% for increased strength at temperatures above 800°F (427°C).[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades[PDF]

HIGH-TEMPERATURE CHARACTERISTICS OF STAINLESS …

requirements of high-temperature service. This booklet discusses factors that should be considered by engineers facing problems in designing equipment for high-temperature service. The characteristics that make some of the stainless steels particularly useful in high-temperature environments are described, and typical engineering data are ...

Type 316/316L Stainless Steels Explained - The Balance

Compare the two types of stainless steel. Marine grade stainless steel, called type 316, is resistant to certain types of interactions. There are a variety of different types of 316 stainless steels, including 316 L, F, N, H, and several others. Each is slightly different, and each is used for different purposes. The "L" designation means 316L steel has less carbon than 316 steel.

304/ 304L stainless steel sheet - deysteel

304 stainless steel is a common stainless steel material, the density of 7.93 g/cm3, the industry is also called 18/8 stainless steel. High temperature resistance of 800 degrees, with good processability, high toughness characteristics, widely used in industry and furniture …

304/304L hot rolled stainless steel plate - tm-steel

Details for 304 material: 304 stainless steel is a common stainless steel material, the density of 7.93 g/cm3, the industry is also called 18/8 stainless steel. High temperature resistance of 800 degrees, with good processing performance, high toughness characteristics, widely used in industrial and furniture decoration industry and food industry.

Experienced supplier of 304L stainless steel plate,304L ...

Bozhong Metal Group is one of the toppest 304/304L/304H/304LN Stainless Steel Sheet/Plate in China.During these years of exporting , Bozhong Metal Group now has …

Mechanical properties of Austenitic Stainless Steel 304L ...

Austenitic Stainless Steel grade 304L and 316L are very important alloys used in various high temperature applications, which make it important to study their mechanical properties at …

316 / 316L Stainless Steel Plate | O'Neal Steel

onealsteel› Stainless Steel› Plate316 / 316L stainless steel plate provides more effective corrosion and pitting protection than 304 stainless steel due to increased levels of molybdenum and nickel in the alloy. It exhibits the same high strength, toughness, high temperature and high workability as 304 stainless alloy plate .

Astm 316L 300 Series Brushed Stainless Steel Plate

Stainless steel is used for jewelry and watches, with 316L beingthe type. 300 Series Stainless Steel Alloys - 302, 304, 316 300 Series Stainless Steel Stock: Stencil Grade, High Temperature, CorrosionResistant Alloys in Plate, Sheet Coil & Rod.

Alloy 304/304H Austenitic Stainless Steel Plate ...

Stainless Steel Plate. Alloy 304/304H has general corrosion resistance similar to 304/304L. It resists atmospheric corrosion, as well as, moderately oxidizing and reducing environments. However, because of its high carbon content, Alloy 304/304H is subject to carbide precipitation in the heat affected zone of welds. Alloy 304/304H is non-magnetic...

Stainless Steel - High Temperature Resistance

Stainless steels are most commonly used for their corrosion resistance. The second most common reason stainless steels are used is for their high temperature properties; stainless steels can be found in applications where high temperature oxidation resistance is necessary, and in other applications ...

304L Stainless Steel Pipe | Clinton Aluminum

304L Stainless Steel Pipe. 304L resists heat well. It shows to have greater carbide precipitation resistance compared to 304 alloys, allowing it to be serviced continuously at temperatures between 800 and 1580 degrees F. 304L stainless steel pipes are austenitic, making it …

304 / 304L - Rolled Alloys, Inc.

304 is the original "18-8" stainless. It is produced in greater quantity than any other austenitic stainless steel. 304 provides useful resistance to corrosion in many environments ranging from moderately reducing to moderately oxidizing. Through the controlled addition of nitrogen, it is common for 304L to meet the mechanical properties...[PDF]

Stainless Steel Grade Datasheets

Stainless Steel Datasheets Revised November 2011 Page 1 of 1 atlassteels.au Austenitic Stainless Steels 301, 301L, 301LN High strength for roll formed structural components 302HQ Low work hardening rate grade for cold heading fasteners 303, 303Se Free-machining bar grades 304, 304L, 304H Standard 18/8 grades 310, 310S, 310H High temperature resistant grades

304 / 304L Stainless Steel Sheet - T304 / T304L Sheet | O ...

onealsteel› Stainless Steel› Sheet304 / 304L stainless steel sheet is used to manufacture stamped and machined parts for parts and products in corrosive and high heat applications. The stainless steel exhibits high corrosion resistance, high strength and temperature resistance. It can be become slightly magnetic when cold worked. It is easy to machine, stamp and weld.

Allegeni Stainless Steel Sheet and Plates 304

Type 304 / 304L Stainless Steel is the Most Reliable & Popular Material Grade Allegeni is the leading brand of stainless steel sheets and plates in the austenitic group 300 series. The properties described on this page for Allegeni are specific to flat-rolled products (plate, sheet, and strip).

304 Stainless Steel Alloy Data Sheet | ESM-Hampshire

Stainless Steel 304 Chemical Composition. The first thing you need to know about Grade 304 stainless steel is that it contains both Chromium and Nickel. In fact, you will see that common grades of stainless steel are marked as 18/8 or 18/10, which refers to the percentage of Chromium and Nickel found within the compound respectively.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.