Tel: +86-371-86151827

q235a steel plate specification

Steel grade:q235a steel plate specification

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

q235a steel plate specification Introduction

Q235 Steel Plate Equivalent Steel Standard-ASTM A36

A36 steel plate is similar to Q235B steel plate, ... (ASTM specification equivalent) materials, SS400, Standard JIS G3101 (common structure with rolling steel) materials, Q235 GB700 standards GB material. ... If you need any info or price details on steel plate of Q235A,Q235B or equivalent steel standard ASTM A36 and SS400, don't hesitate to ...

Q235 Steel, Q235A Q235B Q235C Q235D Specification ...

Q235 steel is a Chinese steel grade of general carbon structural steel, and divided into 4 quality grades: Q235A, Q235B, Q235C and Q235D, material density is 7.85 g/cm3, tensile strength is from 370 to 500 MPa, and yield strength is 235 MPa (tested with 16mm diameter steel bar or steel plate). “Q” is the first letter of Chinese spelling of ...

Q235A,Q235A PLATE,Q235A STEEL - Mild steel plate ...

Q235 carbon steel contains four different grades as Q235A,Q235B,Q235C and Q235D.The big difference among these four carbon steel grades is the impacting temperature.

What is Q235?The difference between Q235A and Q235B ...

What is Q235?The difference between Q235A and Q235B. Ordinary carbon steel - General Board, is a steel material. Q represents the yield of this material, behind the 235, refers to the yield value of this material at about 235.

Overview of Q235 Steel Plate Specification

Over View of Q235 and ss400 steel Specification Q235 steel is equivalent to Japenese steel grade SS400 in application, the only difference is that ss400 steel requires only S,P composition 0.050, Q235 has requirements for More element C, Si[PDF]

Datasheet for Steel Grades Structure Steel Q235

Steel GradeQ235 Chemical information,Mechanical properties Physical properties, Mechanical properties, Heat treatment, and Micro structure This page is mainly introduced the Q235 Datasheet, including chemical

China GBT Q235 steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. Q235 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

Specification Q235a, Specification Q235a Suppliers and ...

Alibaba offers 199 specification q235a products. About 6% of these are steel pipes. A wide variety of specification q235a options are available to you, such as free samples. There are 119 specification q235a suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of specification q235a respectively.[PDF]

Q235A Included in 3 standards (China) - MetalData.Info

Q235A Included in 3 standards (China) Standards GB/T 3091 Welded steel pipe for low pressure liquid delively GB/T 3524 Hot-rolled cardon and low alloy structural steel strips

What is Q235 steel grade? - Quora

Q235 steel is a carbon structural steel. It is equivalent to A3 and C3 steel in the old standard GB700-79 grade, and it is the grade of Russian TOCT. The Q in the steel number represents the yield strength. Usually, the steel is used directly without heat treatment.

q235a steel specification - w3s.in

GB/T700 Q235A Carbon Structural steel plate - corten-a … Q235A Carbon Structural steel plate is kind of carbon steel in steel specification GB/T700.GB/T700 Q235A Carbon Structural steel plate has many excellent properties, high strength, good tenacity, excellent welding-ability etc. Q235A steel plate main applications include producing structural parts of the bolted and welded steel in ...

Q235A I beam specification - pressure vessel steel plate ...

Q235A I beam specification, steel,Hot sell Q235A I beam specification, pressure vessel steel plate grades stock in China,China Q235A I beam specification, pressure vessel steel plate grades factory. Keeps more than 10,000 tons hot rolled and cold rolled Q235A I beam specification, pressure vessel steel plate grades in stock each month.

q235a steel specification - w3s.in

GB/T700 Q235A Carbon Structural steel plate - corten-a … Q235A Carbon Structural steel plate is kind of carbon steel in steel specification GB/T700.GB/T700 Q235A Carbon Structural steel plate has many excellent properties, high strength, good tenacity, excellent welding-ability etc. Q235A steel plate main applications include producing structural parts of the bolted and welded steel in ...[PDF]

Q235A Included in 3 standards (China) - MetalData.Info

Q235A Included in 3 standards (China) Standards GB/T 3091 Welded steel pipe for low pressure liquid delively GB/T 3524 Hot-rolled cardon and low alloy structural steel strips

Q235A I beam specification - pressure vessel steel plate ...

Q235A I beam specification, steel,Hot sell Q235A I beam specification, pressure vessel steel plate grades stock in China,China Q235A I beam specification, pressure vessel steel plate grades factory. Keeps more than 10,000 tons hot rolled and cold rolled Q235A I beam specification, pressure vessel steel plate grades in stock each month.

Q235A angle bar specification - pressure vessel steel ...

Q235A angle bar specification, steel,Hot sell Q235A angle bar specification, pressure vessel steel plate grades stock in China,China Q235A angle bar specification, pressure vessel steel plate grades factory. Keeps more than 10,000 tons hot rolled and cold rolled Q235A angle bar specification, pressure vessel steel plate grades in stock each month.

Q235 SS400 MS Plate/sheet,Carbon steel SS400 specification

Professional on supplying ASME SA204 GRB steel plate ; ... Home- Selling list Q235 SS400 MS Plate/sheet,Carbon steel SS400 specification. Q235 SS400 MS Plate/sheet,Carbon steel SS400 specification. Posted:9/4/2014 9:45:49 PM. ss400 steel is a marked way Japanese steel material, equivalent to the domestic steel Q235 numbers. Foreign standards of ...

GB/T 700 Q235A Carbon Steel Plate__Steel Supplier

GB/T 700 Q235A Carbon Steel Plate. Gangsteel supplyGB/T 700 Q235A Low alloy and high strength steel plate, heavy plate and wide, heavy plate. Keyword: GB/T 700 Q235A, Q235A,Q235A Steel Plate,Q235A Stock,Q235A supplier . Q235A Adopt standard: GB/T 700 Standard Specification is for Rolled Steels for Welded Structure

supplier of q235b steel specification,A36,Q235B,Q345B ...

Q345 Steel Specification and Equivalent Standard. Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship ...

supplier of q235a material,A36,Q235B,Q345B steel plate ...

Q235A Steel, Q235A Steel Specification Material, Q235A … Q235A Steel are low carbon steel. Their mechanical properties are almost the same, but the tensile strength is a little higher than S15C. supplier of Q235A equal angle equivalent material,A36

Steel Plate GB/T700 Grade Q235A Q235B Q235C Q235D in …

Steel Plate GB/T700 Grade Q235A Q235B Q235C Q235D in Large Stock. Mechanical and chemical properties of GB/T700 Q235A C % Si % Mn % P % S % N % 0.23-0.24 0.6 1.7 0.035 0.035 Thickness Yield Strength (Mpa) Tensile Strength Elongation Impact Energy (mm)

ASTM A36 Steel Plate - Completely Specifications You ...

With excellent properties, this steel plate can be bolted, riveted and welded in the construction of buildings, bridges, and buildings and for any general structural purposes. A36 Steel Equivalent materials. ASTM A36 is said to be same as EN S275 steel plate. A36 steel is a very low carbon steel that blends great strength with form ability.

China Hot Rolled A3 Mild Steel Plates (Q235A, Q235B, …

Steel Plate, Mild Steel Plate, Hot Rolled Steel Plate manufacturer / supplier in China, offering Hot Rolled A3 Mild Steel Plates (Q235A, Q235B, Q235C, Q235D), Hot Rolled Ar400 Ar450 Ar500 Wear Resistant Steel Plates, Ansteel Brand Q235B ASTM A36 Hot Rolled Carbon Steel Coils and so on.

q235a Specification - Changzeng Metal,Supplier of Steel ...

Q235 carbon steel contains four different grades as Q235A,Q235B,Q235C and Q235D.The big difference among these four carbon steel grades is the impacting temperature.

Q235A Carbon Steel Plate - Made-in-China

Carbon Steel Plate, Steel Plate/Sheet, Hot Rolled Steel Plate/Sheet manufacturer / supplier in China, offering Q235A Carbon Steel Plate, 1050 Aluminum Plate /Sheet, Copper Pipe Elbow C11000, C10200, C12200, C12000 and so on.

Q195, Q215, Q235, Q255 and Q275 in the material What is ...

Q195, Q215, Q235, Q255 and Q275 in the material What is the difference? Carbon steel structural steel is the most widely used, the maximum number of, often rolled into steel, shapes and sections, generally does not require the use of direct heat treated, mainly for construction and general engineering.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.