Tel: +86-371-86151827

mirror surface cold rolled 316 stainless sheet price

Steel grade:mirror surface cold rolled 316 stainless sheet price

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

mirror surface cold rolled 316 stainless sheet price Introduction

316/316L cold rolled stainless steel sheet

316/316L cold rolled stainless steel sheet TIME:2017-08-15. Product Introduction: 316/316L stainless steel. 316 316L steel is following the 304 stainless steel after the second most widely used. The only difference between them is the carbon content. This leads to a little difference between the two, but the overall use is the same.

Mirror Finish Stainless Steel Sheet - Mirror Finish SS ...

Mirror Stainless Steel Sheet is a high gloss, polished finish, having a high degree of reflectiveness which can be done on all the grades of stainless steel. It is produced by progressively using finer abrasives and finally finishing with

China Mirror Surface Steel Sheet 316L - China Stainless ...

Stainless Steel Sheet 316, Stainless Steel Sheet 316L, Mirror Surface Stainless Steel manufacturer / supplier in China, offering Mirror Surface Steel Sheet 316L, Stainless Steel Sheet 254smo, 254smo Stainless Steel Manufacturer, ASTM S32654 Stainless Steel Plate. ASTM a 240 Steel Plate and so on.

Mirror Stainless Steel Sheet Cold Rolled Wholesale ...

Alibaba offers 18,493 mirror stainless steel sheet cold rolled products. About 89% of these are stainless steel sheets, 5% are steel sheets. A wide variety of mirror stainless steel sheet cold rolled options are available to you, such as astm, aisi, and jis.

TISCO 316L Stainless steel sheet mirror finish

201 Stainless Steel Sheet, You can Buy good quality 201 Stainless Steel Sheet , we are 201 Stainless Steel Sheet distributor & 201 316L Stainless Steel Coil Hot Rolled Stainless Steel Sheets And Plates 4 - 16mm Thickness HL Mirror Surface Cold Rolling 201 Stainless Steel Sheet With Available Surface …

Cold Rolled Stainless Steel Sheet 316 Wholesale, Stainless ...

Alibaba offers 30,433 cold rolled stainless steel sheet 316 products. About 90% of these are stainless steel sheets, 4% are steel sheets. A wide variety of cold rolled stainless steel sheet 316 options are available to you, such as astm, jis.

Cold Rolled 304 316 316L Mirror Finish Stainless Steel Sheet

Steel Sheet, Steel, Stainless Steel Plate manufacturer / supplier in China, offering Cold Rolled 304 316 316L Mirror Finish Stainless Steel Sheet, ASTM A516 Gr70 Building Material Boiler Steel Plate/Boiler Steel Plate, Building Material Prepainted Galvanized Steel Coil/PPGI/Color Steel Coil and so on.

201/304/316/430 Rose Gold /gold Mirror Polished Stainless ...

201/304/316/430 Rose Gold /gold Mirror Polished Stainless Steel Sheets Color stainless steel sheet(PVD stainless steel sheet) Introduction: Mirror (No.8, Non-Directional) is a high gloss, polished finish, having a high degree of reflectiveness which can be done on all the grades of stainless …

Mirror stainless steel sheet - Foshan Shunhengli Import ...

China Mirror stainless steel sheet catalog of Foshan Ti-Gold Factory Mirror Pink Color Stainless Steel Sheet for Hotel Decorative Materials, Customized 316 PVD Coated Rose Gold Color Stainless Steel Inox Mirror Sheet provided by China manufacturer - Foshan Shunhengli Import …

Stianless Steel Sheet & Palte Price

(2)BA stainless steel plate is bright annealing after cold rolling, the surface is not oxidized and bright. (3)8K mirror panel, also known as 8K board, also known as mirror panel, is polished on the surface of stainless steel plate with polishing liquid by polishing equipment, so that the surface brightness of the board is as clear as a mirror.

316 Stainless Steel Sheet - 316 SS Sheet Latest Price ...

Find here 316 Stainless Steel Sheet, 316 SS Sheet manufacturers, suppliers & exporters in India. Get contact details & address of companies manufacturing and supplying 316 Stainless Steel Sheet, 316 SS Sheet across India.

201/304/316/430 Rose Gold /gold Mirror Polished Stainless ...

201/304/316/430 Rose Gold /gold Mirror Polished Stainless Steel Sheets Color stainless steel sheet(PVD stainless steel sheet) Introduction: Mirror (No.8, Non-Directional) is a high gloss, polished finish, having a high degree of reflectiveness which can be done on all the grades of stainless …

8k Mirror Finish 201 304 316 316L Stainless Steel Panels ...

Quality Stainless Steel Sheet manufacturers & exporter - buy 8k Mirror Finish 201 304 316 316L Stainless Steel Panels 8K Surface from China manufacturer.

stainless steel sheet supply in China

Q235 SS400 Cold Rolled Steel Coil Made In China; 400mirron Stainless Steel Wire Mesh; Seamless Carbon Steel Pipe Per Ton And Price List; Walkway With Aluminum Expanded Metal Mesh; Astm Acrylic Mirror Sheet Stainless Steel 304

4x8 Stainless Steel Sheet Price

4x8 Stainless Steel Sheet - Alibaba . 430 304 304L 316L 201 310s 321 316 4x8 sheet metal prices stainless steel Standard ASTM cold rolled 2B finish 4x8 stainless steel sheet price.

201 304 Mirror Ti Gold Stainless Steel Sheet Manufacturers ...

Find the best quality, precise and durable 201 304 mirror ti gold stainless steel sheet at gabriel-stainlesssteel. Known as one of the professional manufacturers and suppliers in China, we've got all of our products made under strict quality control system in our factory. Please rest assured to buy.

316 mirror polished stainless steel sheet plate,stainless ...

Surface Finish: 2B/BA/NO.1/NO.8/ NO.4/6K/8K/HAIR LINE 304 2b stainless steel sheet ... Thickness: 0.3mm-3.0mm (Cold Rolled Stainless Steel Plate) 3mm-100mm (Hot Rolled Stainless Steel Plate) Width: 1000mm,1219mm,1250mm,1500mm, 304 ba stainless steel ... 316 mirror polished stainless steel sheet plate Chemical composition .

SS316L stainless steel sheet made in China

SS316L Stainless Steel Plate, 316 Mirror Surface Plate, Stainless Steel Plate manufacturer / supplier in China, offering Ss 316 316L Mirror Surface Stainless Steel Plate, Mirror Finish Stainless Steel Sheet 304 316 304L 316L, 304 316 Stainless Steel Square Bar 10mm and so on. China Low Price Ss316L 316 Stainless Steel Pipe - China ...

430 cold rolled 2b surface stainless steel strip

Surface Finishes. Cold Rolled Stainless Steel Sheet and Strip Cold Rolled Stainless Steel Sheet and Strip and degree, and application examples Thi;kne$$ (mm) SUS 430 SUS 304 SUS 316 SUS 410 2B finish is recommended for such applications as. stainless steel coil,stainless …

Stainless Steel sheet Products - Polished Sheet | Penn ...

Stainless Steel Polished Sheet. Catalog; Penn Stainless stocks over 25 grades of stainless steel sheet in a variety of finishes, including 2D, 2B, #4 Brush, and #8 Mirror finish. We also can supply specialty finishes per your exact requirements.

Experienced supplier of 316L stainless steel plate,316 ...

With wide experience and expertise, Bozhong Group is one of the leading 316/316l/316ti/316L stainless steel sheet/plate manufacturers and suppliers. We have hundreds of high-qualified workers at your service. Please rest assured to get the competitive price 316/316l/316ti stainless steel sheet…

mirror surface 8k stainless steel coil - srilankasports.org

Steel Coil, Stainless Steel Coil, Stainless Steel Product manufacturer / supplier in China, offering Stainless Steel Mirror Surface Coil 321, ASTM 316 Stainless Steel 2b Surface Plate, Stainless Steel Cold Rolled Sheet (304 321 316L 310S 904L) and so on.

China Cold Rolled 201 304 304L 316 Stainless Steel Sheet ...

Stainless Steel Sheet, 304 Stainless Steel Sheet, Stainless Steel Sheet Price manufacturer / supplier in China, offering Cold Rolled 201 304 304L 316 Stainless Steel Sheet, St37-2 Ss400 Hot Rolled Mild Steel Checkered Plate, Q235 Mild Low Carbon Steel Hot Rolled Steel Coil and so on.

Stianless Steel Sheet & Palte Price

(2)BA stainless steel plate is bright annealing after cold rolling, the surface is not oxidized and bright. (3)8K mirror panel, also known as 8K board, also known as mirror panel, is polished on the surface of stainless steel plate with polishing liquid by polishing equipment, so that the surface brightness of the board is as clear as a mirror.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.