Tel: +86-371-86151827

china en10025 4 s275ml steel plate

Steel grade:china en10025 4 s275ml steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

china en10025 4 s275ml steel plate Introduction

Steel Plate EN10025-4 Grade S275M S355M S275ML S355ML ...

Steel Plate EN10025-4 Grade S275M S355M S275ML S355ML S420ML EN10025-4 S460M S460ML in Large Stock. Mechanical and chemical properties of EN10025-4 S275M Chemical composition % MAX C Si Mn P S Nb V Al Ti Cr Ni Mo N 0.15 0.55 1.6 0.035 0.03 0.06 0.1 0.

S275ML,S275ML PLATE,S275ML STEEL - Mild steel plate ...

Structural steel plate S275ML is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 centigree.When rolling steel plate S275ML, the P and S contents can be 0.005% ...

EN10025-4 - Bebon steels

EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade:S275M,S355M,S275ML,S355ML,S420ML,S420M,S460M,S460ML and so on.

China EN10025 4 S275ML steel plate - thehandler.nl

EN10025-4 - Bebon steels. EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade:S275M,S355M,S275ML,S355ML,S420ML,S420M,S460M,S460ML and so on.

EN10025-4 S275ML Steel plate Supplier - Gangsteel

EN10025-4 S275ML Steel plate Supplier. Gangsteel supply EN10025-4 S275ML Steel plate with TMCP delivery situation.We sell EN 10025-4 S275ML Steel plate machined parts and cutting parts. Keywords: S275ML Steel plate, S275ML equivalent, S275ML Steel grade, S275ML Chemical composition, S275ML Mechanical properties

EN10025-4 S420M Steel plate Supplier - Gangsteel

EN10025-4 S420M Steel plate Supplier . Gangsteel supply EN10025-4 S420M Steel plate with TMCP delivery situation.We sell EN 10025-4 S420M Steel plate machined parts and cutting parts. Keywords: S420M Steel plate, S420M equivalent, S420M Steel grade, S420M Chemical composition, S420M Mechanical properties

EN10025-4 S275ML Carbon and Low-alloy High-strength …

Any request for EN10025-4 S275ML Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

EN10025-4 - Mild steel plate,shipbuilding steel plate ...

EN10025-4 is used for intermediate and higher temperature pressure vessels and boilers. ... S275ML Steel Standard:EN ... Medium and heavy plates' price rose sharply... China's Steel Mills Need to Shrink... China steel prices became lowest as mills near to closu...

S355ML EN10025-4 S355ML steel plate - steelspecs

S355ML EN10025-4 S355ML steel plate 2011年4月5日 by admin. ... Gangsteel is a large agent of HBIS wuyang mill in China and we are specialized in super thick S355ML steel plate. We could supply the min order is a piece and promise the competitive price in order to enlarge our oversea market. ... « S275ML EN10025-4 S275ML steel. S355M EN10025 ...

China EN10025 4 S275ML steel plate - thehandler.nl

EN10025-4 - Bebon steels. EN10025-4 is Standard specifies Hot rolled products of structural steels. Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels.EN10025-4 Standard main steel grade:S275M,S355M,S275ML,S355ML,S420ML,S420M,S460M,S460ML and so on.

EN10025-4 S275ML Carbon and Low-alloy High-strength Steel ...

Any request for EN10025-4 S275ML Carbon and Low-alloy High-strength Steel Plate Email: [email protected] and Tel:0086-371-65652655 Inquiry If you have any request or doubts,Please send message to us,It will be checked for you on time.

EN10025-4 - Mild steel plate,shipbuilding steel plate ...

EN10025-4 is used for intermediate and higher temperature pressure vessels and boilers. ... S275ML Steel Standard:EN ... Medium and heavy plates' price rose sharply... China's Steel Mills Need to Shrink... China steel prices became lowest as mills near to closu...

EN 10025-4 S275ML,S275ML structural steel plate--Xin Steel ...

Structural steel plate S275ML is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 centigree.When rolling steel plate S275ML, the P and S contents can be 0.005% ...

EN10025-4 S355ML| S355ML steel plate__Steel Supplier

Gangsteel is specialized in supplying EN10025-4 steel plate in S355ML. For more information of S355ML steel plates, please check them in following: Chemical composition % of the Product analysis of grade S355ML (1.8834)Nominal thickness form 16to 40(mm) CEV max = 0.39

S275M EN10025-4 S275M steel plate - steelspecs

S275M EN10025-4 S275M steel plate 2011年4月5日 by admin. ... Gangsteel is a large agent of HBIS wuyang mill in China and we are specialized in super thick S275M steel plate. We could supply the min order is a piece and promise the competitive price in order to enlarge our oversea market. ... S275ML EN10025-4 S275ML steel » ...

China En10025 Steel Plate - China S235jr Steel Plate ...

S235jr Steel Plate, S235jr Steel Sheet, S235j0 Steel Plate manufacturer / supplier in China, offering En10025 Steel Plate, Brass Strip/ Bronze Strip, ASTM Brass Tube / Brass Pipe and so on.

S355ML EN10025-4 S355ML steel plate - steelspecs

S355ML EN10025-4 S355ML steel plate 2011年4月5日 by admin. ... Gangsteel is a large agent of HBIS wuyang mill in China and we are specialized in super thick S355ML steel plate. We could supply the min order is a piece and promise the competitive price in order to enlarge our oversea market. ... « S275ML EN10025-4 S275ML steel. S355M EN10025 ...

supplier of en10025 4 s275m steel,A36,Q235B,Q345B steel ...

China EN10025 4 S275M steel sheet manufacture - KATALOR STEEL ... Steel Plate EN10025-4 Grade S275M S355M S275ML S355ML S420ML EN10025-4 S460M S460ML in Large Stock. Mechanical and chemical properties of EN10025-4 S275M Chemical composition % MAX C Si Mn P S Nb V Al Ti Cr Ni Mo N 0.15 0.55 1.6 0.035 0.03 0.06 0.1 0.

EN 10025-4 S460M,S460M steel plate__Steel Supplier

Gangsteel is specialized in supplying EN10025-4 steel plate in S460M.For more information of S460M steel plates, please check them in following: Chemical composition % of the Product analysis of grade S460M (1.8827). Nominal thickness≤16(mm) CEV max = 0.45

S275ML|S275ML STEEL PLATE--YUSHENG STEEL

Steel Grade S275ML under Europe standard EN10025 _ 4,owning to it is the necessary technical terms to do low . temperature impacting test at minus 50 centi degree for steel plate S355ML,so that this steel can be used in the . deep ocean and the two poles surroundings.

China En10025 S355j2wp Corten Steel Plate - China Steel ...

Steel Plate, Weather Steel Plate, Corten Plate manufacturer / supplier in China, offering En10025 S355j2wp Corten Steel Plate, PPGI Color Coated Corrugated Iron Roofing Sheet, Prepainted Galvanized Corrugated Steel Roofing Sheet and so on.

EN10025-4 steel coil - S275M,S275ML…

Sell EN10025-4 steel coil - S275M,S275ML,S355M,S355ML,S420M,S420ML,S460M and S460ML with chemical and mechanical properties. Contact us for length, width and thickness.

China Hot Rolled En 10025 S235jr S355jr Carbon Steel Plate ...

Plate Steel Prices, Steel Plate, S235jr Steel Plate manufacturer / supplier in China, offering Hot Rolled En 10025 S235jr S355jr Carbon Steel Plate Price, ANSI B16.5 ASTM A105 Casting Flange, 2inch 4inch 6inch Hot Dipped Galvanized/Electri Galvanized Malleable Iron Tee and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.