Tel: +86-371-86151827

201 stainless steel sheet 201 stainless

Steel grade:201 stainless steel sheet 201 stainless

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

201 stainless steel sheet 201 stainless Introduction

Properties and Composition of Type 201 Stainless Steel

Facts About Type 201 Stainless Steel Type 201 stainless steel is a mid-range product with a variety of useful qualities. While it is ideal for certain uses, it is not a good choice for structures that may be prone to corrosive forces such as salt water.

201 Stainless Steel - NKS

Description: Type 201 Stainless Steel is an austenitic chromium-nickel-manganese stainless steel which was developed to conserve nickel. Type 201 is a lower cost alternative to conventional Cr-Ni stainless steels such as 301 and 304. Nickel is replaced by additions of manganese and nitrogen.[PDF]

201 Stainless Steel Sheet - Alro Steel

201 Stainless Steel Sheet 201 alloy is a high performance austenitic stainless steel that combines good mechanical properties, corrosion resistance, formability, fabrication, and welding characteristics and is similar in many respects to 304 stainless steel. The substitution of

304 vs 201 stainless steel

stainlesssteelblog› 316 - 304 Stainless Steel304 vs 201 stainless steel Stainless steel is a term used to refer to several different metals that are commonly used in industries including transportation, construction, and even architecture. Two commonly used alloys are 201 and 304.

Stainless Steel Type 201 - Rolled Metal Products

Rolled Metal Products is one of the steel industry’s most respected service centers with facilities across North America. We stock Stainless Steel, Nickel Alloys, Aluminum and other Specialty Metals in coil form and also offer toll processing of various metals including: Stainless Steel, Nickel Alloys, Titanium, Aluminum, Brass, Copper, Carbon Steel, and other Specialty Metals.

201 Stainless Steel Alloy Data Sheet | CMC - Bellwood

Uses of Stainless Steel 201. Stainless steel grade 201 is a mid-range product typically found in appliances, cookware, sinks, kitchen utensils, and food service equipment. It is also found in automotive parts and clamps as well as railroad cars, and window trim. Its structural integrity and makeup make it ideal for uses in these industries.

201 Stainless Steel UNS S20100 | Ulbrich

Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. Type 201 is generally used in the tempered condition particularly for springs and fasteners. Learn more here about its applications and properties.

201 Stainless - Galion-Godwin

201 Stainless. Stainless Steel "The Basics" The most important alloying element that makes stainless steels "Stainless" is Chromium. When at least 11% Cr is present, a continuous layer of an invisible oxide will form, which is what gives stainless steels their superior corrosion resistance. ... It is available in plate and sheet and is used for ...[PDF]

201 STAINLESS STEEL - AK Steel Holding

201 stainless steel A Steel is a orld leader in the production of atrolled carbon, stainless and electrical steel products, primarily for automotie, infrastructure and manufacturing, construction and electrical poer generation and distribution marets. eaduartered in West hester, hio …[PDF]

201 STAINLESS STEEL - clevelandmetal

201 STAINLESS STEEL 201 StainleSS Steel AK Steel Corporation 9227 Centre Pointe Drive West Chester, OH 45069 800.331.5050 aksteel The information and data in this product data sheet are accurate to the best of our knowledge and belief, but are intended for general information only.

Type 201 Stainless Coil - Scott Stainless Steel

Since 1953, Scott Stainless Steel, Inc. has distributed flat rolled stainless steel with an emphasis in stainless steel coil. We offer unsurpassed stainless steel coil processing including precision stainless steel slitting and custom stainless steel edging. ... Type 201 Stainless Coil. Type 201 is: Austenitic: a chromium nickel alloy that ...[PDF]

North American Stainless

North American Stainless . Flat Products Stainless Steel Grade Sheet . 201 (S20100) 201LN (S20153) EN 1.4372 . Introduction: SS201 is a lower-cost alternative to the conventional Cr-Ni austenitic stainless steels, such as SS304. About half of the nickel content of SS304 is replaced with alloy additions of manganese and nitrogen.

Type 201 Stainless Coil - Scott Stainless Steel

Since 1953, Scott Stainless Steel, Inc. has distributed flat rolled stainless steel with an emphasis in stainless steel coil. We offer unsurpassed stainless steel coil processing including precision stainless steel slitting and custom stainless steel edging. ... Type 201 Stainless Coil. Type 201 is: Austenitic: a chromium nickel alloy that ...

201 Stainless Steel | Flat Rolled Metals Supplier | Metalwest

Type 201 stainless steel is a low nickel, high-work hardening, austenitic chromium-nickel-manganese stainless steel. Type 201 stainless steel is not hardenable by heat treatment. It may be substituted, in some cases, for other higher nickel content alloys. Stainless is created by extracting chromite from underground mines.

201 stainless steel vs 304

stainlesssteelblog› Stainless Steel ClassificationHere is some characteristics to distinguse of 201 and 304 stainless steel 1. Stainless steel Specification: the commonly used stainless steel plate is divided into 201 and 304 two models, is actually is different, 304 quality good composition, but the price is expensive, some 201 sent some. 304 for import stainless steel sheet, and 201 for ...

201 Stainless Steel UNS S20100 | Ulbrich

Type 201 stainless steel is an austenitic chromium-nickel-manganese stainless alloy. Type 201 is generally used in the tempered condition particularly for springs and fasteners. Learn more here about its applications and properties.

201 Stainless Steel Sheet - Jainex Steel

201 Stainless Steel Sheet. 201 stainless steel sheet is a stronger stainless alloy than T304 due to a compound that includes half the nickel and increased manganese and nitrogen. It exhibits the most of the same properties as the other stainless alloys, but is not as ductile or formable.[PDF]

201 Stainless Steel | AK Steel

201 STAINLESS STEEL TYPE 201 is an austenitic, chromium-nickel-manganese stainless steel that was developed originally to conserve nickel. It provides properties similar to, and can be used in most Type 301 applications. This alloy is non-magnetic in the …

Experienced supplier of 201&202 Stainless Steel Sheet

201&202 Stainless Steel Pipe About Us Shandong Yuening Metal Technology Co.,Ltd is a China-leading product service provider and exporter of stainless steel coil, sheet, pipe, bar, Shandong...

Stainless Steel 201 | UNS S20100 - Long Products – Sheet ...

Stainless steel alloy 201 has lower nickel alloy with similar properties to 301. 201 is slightly magnetic when work hardened

ATI 201 HP ™ Austenitic Stainless Steel - atimetals

ATI 201 HP™ & ATI 201L HP™ austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, similar to the 300 series of Cr-Ni stainless alloys, but contain less nickel.

USA AISI AISI 201 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 201 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

201 stainless steel sheet

201 stainless steel sheet . 201 alloy is a high performance austenitic stainless steel that combines good mechanical properties, corrosion resistance, formability, fabrication, and welding characteristics and is similar in many respects to 304 stainless steel. The substitution of manganese for a portion of the nickel content used in 300 Series ...

Stainless Steel – Grade 201

Grade 201 stainless steel has good formability, corrosion resistance, and fabricability. It is similar to that of 301 stainless steel. The following datasheet gives more details about grade 201 stainless steel. Chemical Composition. The following table shows the chemical composition of grade 201 stainless steel.

201 Stainless Steel Strip Coil and Slit Coil - Gibbs

Originally developed as a result of resource allocation during World War II, Austenitic Stainless Steel Type 201( ASTM-A-666/UNS S20100), contains a lower Nickel content (4.5% vs 8.1%) and higher Manganese content (7.1% vs 1%) than Types 301 and 304.

201 Stainless Steel Vs 304

The Difference Between Stainless Steels - Summerset Grills. 304 stainless steel is one of the most desired and widely used grades of stainless on the Some grills are also using 201 and 202 stainless, which has recently

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.