Tel: +86-371-86151827

low alloy high strength weight 1 thick steel plate

Steel grade:low alloy high strength weight 1 thick steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

low alloy high strength weight 1 thick steel plate Introduction

High Strength Low Alloy Steel Plate - INFRA-METALS

ASTM A514 – Standard specification for high-yield-strength, quenched and tempered alloy steel plate, suitable for welding. This specification covers quenched and tempered alloy steel plates of structural quality intended primarily for use in welded bridge construction and other structures.

Alloy | Chatham Steel

Alloy: High Strength: Quenched and tempered alloy steel plates used primarily for their high yield-t0-weight ratio. 100,000 min. yield: ASTM A-514 Construction Grade: 3/16" to 6" 4'x8' through 10'x40' Abrasion Resistant: As-Rolled AR steel, not quenched and tempered, for moderate wear applications: AR 225/235: 3/16" to 1" 4'x8' through 8'x20'

A588 / A606 / A242 Structural, Carbon & HSLA Steel Plate ...

A high-strength, low-alloy steel plate utilized primarily in structural applications such as bridges and buildings. This grade is designed for projects requiring atmospheric corrosion resistance. Its advantage over A572 50 is its weathering ability. When properly exposed to the atmosphere, this steel plate can be utilized in its bare condition ...

A-572 50-High Strength, Low Alloy Steel

aasteel› …› Construction / Bridge Building (HSLA)Overview

High Strength Low Alloy - Farwest Steel

High Strength Low Alloy; Product Categories ... Farwest minimizes waste by processing A572-50 coil 3/16″ to 1/2″ thick material 48″ to 96″ wide material to any length using Farwest’s state of the art Bradbury cut-to-length line. Farwest carries a A656-70 product for plate in 1″. Grade 80 specifications. For plates wider than 24 ...[PDF]

High-Strength Low-Alloy Steels - ASM International

The HSLA steels in sheet or plate form have low carbon content (0.05 to −0.25% C) in order to produce adequate formability and weldability, and they have manganese content up to 2.0%.

High Strength Low Alloy (HSLA) Steel | All Metals & Forge ...

For example, the increase in strength from 35,000 to 80,000 psi may be accompanied by a 30 to 40% loss in ductility. Improved-formability HSLA steels were developed primarily for the automotive industry to replace low-carbon steel parts with thinner cross-section parts for reduced weight without sacrificing strength and dent resistance.

ASTM A588 & A606 Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsASTM A588 steel plate is a corrosion-resistant steel high-strength low-alloy (HSLA) structural steel plate that is excellent for welding, riveting or bolting in construction applications, primarily welded bridges and buildings where savings in weight or added durability are important.When properly exposed to the atmosphere, A588 is suitable for many applications in the bare or unpainted condition.

A572 Structural, Carbon & HSLA Steel Plate - BBN Steel

A high-strength low-alloy steel plate that is utilized in a variety of structural applications. This specification is produced in Grades 42, 50, 55, 60 & 65, the grades representing the yield strength. Plates that are 4” and thicker are made to a 42 KSI yield, although material can be modified to reach the 50 KSI min yield.

Carbon Steel, High-Strength-Low Alloy, Stainless Steel ...

HOT ROLLED CARBON STEEL BARS. HIGH STRENGTH LOW ALLOY BARS ASTM A-588 is a high strength steel offering a minimum yield of 50KSI for bars up to 4" thick. These bars are copper bearing bars that offer approximately two to four times the corrosion resistance of carbon steel …[PDF]

Section F - emjmetals

High Strength Low Alloy Plates are stocked in thicknesses from 3/16” to 3 1/2”, widths up to 96”, and lengths up to 360”. For weights refer to Section D, Pages 6 and 7.

Supply high strength low alloy steel plate with best materials

Applications of Low Alloy Steel Plate: The A36 steel plate is extensively used in a variety of industries. The A572 is widely used in structural applications, including bridges, buildings and construction equipment and more. The A656 steel plate is used in construction equipment, crane booms, truck frames and general fabrication.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

100XF Temper Leveled Plate 100XF steel plate has been developed for applications where increased strength-to-weight ratios are required. It has physical properties similar to those of ASTM A514 even though its manufacturing process does not require heat treatment. 100XF is available as temper leveled, cut-to-length plate.

High Strength Low Alloy - Farwest Steel

Farwest minimizes waste by processing A572-50 coil 3/16″ to 1/2″ thick material 48″ to 96″ wide material to any length using Farwest’s state of the art Bradbury cut-to-length line. Farwest carries a A656-70 product for plate in 1″. Grade 80 specifications.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Type of Steel Alloy Alloy Alloy Alloy Requirements for Delivery A6 A6 A6 A6 Tensile Strength (ksi) 110/130 110/130 110/130 100/130 Yield Strength (Min. ksi) 100 100 100 90 Spec. *This grade of steel may be susceptible to cracking in the heat-affected zone of …

Plate | AZCO Steel Company

ASTM A588: A High Strength-Low Alloy steel plate similar to ASTM A572-Gr50 but is a “Copper Bearing” steel offering approximately four times the corrosion resistance of structural carbon steel grades. This steel has a minimum yield in the range of 42 KSI to 50 KSI depending upon thickness.

Low Alloy Steel Plate Wholesale, Steel Plate Suppliers ...

Alibaba offers 9,021 low alloy steel plate products. About 42% of these are steel sheets, 1% are casting, and 1% are silicon steel. A wide variety of low alloy steel plate options are available to you, such as spring steel bar, coil, and plate.

A572 Steel Plate Supplier - A572 Grades 50 & 42 ...

universalsteelamerica› …› ASTM Structural PlatesUniversal Steel stocks A572-50 from 3/16” thick up to 4” thick, and A572-42 above 4” thick up to 6” thick. A572 is used in structural applications where strength and notch toughness are more critical than the general A36 requirements. Standard stock is provided in the as-rolled condition; however, normalized material can be obtained.

Steel Plate Grades - Continental Steel & Tube Company

STEEL PLATE COILS. Low carbon, black, and pickled and oiled steel coils are available from 3/16″ to 1/2″ thick, up to 84″ wide for precision roller levelling and cutting to standard and special lengths up to …

Plate - McNeilus Steel, Inc.

This specification covers high strength low alloy plate where savings in weight and added durability are important. The atmospheric corrosion resistance of this steel in most environments is substantially better than that of carbon structural steels with or without copper addition.

HY 80 / 100 (MIL-S-16216)-High Yield and High Strength ...

aasteel› Products/Industries› Military GradesHY 80 / 100 (MIL-S-16216) Home > Products/Industries > Military Grades > HY 80 / 100 (MIL-S-16216) Overview. Primarily used in military applications, but also in areas where high strength is required as both grades have elevated yield strengths (HY 80 – 80ksi, HY 100 – 100ksi).

Classification of Carbon and Low-Alloy Steels

Typical uses are in automobile body panels, tin plate, and wire products. For rolled steel structural plates and sections, the carbon content may be increased to approximately 0.30%, with higher manganese content up to 1.5%. These materials may be used for stampings, forgings, seamless tubes, and boiler plate. ... High-Strength Low-Alloy Steels.

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

ASTM A514 T1 Steel Plate | Buy Online | Cut to Size | No ...

Features. A.K.A: Flat stock. ASTM: ASTM A514 (Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Abrasion Resistent, Suitable for Welding) Alloy: 514 Characteristics: Rough, rust scale finish. Workability: Good candiate for some processing techniques. Applications: High strength structural quality, used in smaller cross sections and shapes for weight ...

Steel Plates - Russel Metals

ASTM A 242 Specification for High Strength Low Alloy Structural Steels ASTM A 242 covers high strength low alloy steel shapes, plates and bars for welded, riveted or bolted construction intended primarily for use as structural members where saving in weight or added durability are important.

Carbon Steel Plate - Royal Metal Industries

A514 is a specific high strength steel, which is quenched and tempered alloy steel, with a yield strength of 100k psi. A588 = Is a high strength low-alloy structural steel, with improved corrosion resistance for structural steel shapes such as angles, channel and beams, as well as steel plate …

HY 100 Steel - Metal Alloys

HY 100 is a high yield steel with minimum yield strength of 100 ksi. While many steels offer high yield strength, HY 100 also offers exceptionally high impact strength as well. This combination makes HY 100 unique among steels. This material is used extensively in marine defense and petrochemical applications.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.