Tel: +86-371-86151827

p460q steel plate application

Steel grade:p460q steel plate application

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

p460q steel plate application Introduction

P460Q,P460Q PLATE,P460Q STEEL

Pressure vessel steel plate P460Q shall be rolling completely according to EN 10028-6 steel standard.These requirements outline the testing and retesting methods and procedures,permissible variations in dimensions and weight,quality and repair of defects,marking,loading,etc.

P460Q steel plate, P460Q chemical composition, P460Q ...

P460Q steel plate is a kind of quenched and tempered steel, it is mainly used for building welded boilers and pressure vessels. The following is P460Q steel plate details for your reference.

Boiler steel plate P460Q EN 10028-6 Quenched and tempered

Steel Name:P460Q Boiler steel plate,P460Q Pressure vessel steel plate Steel Grade:P460Q Steel Standard: EN10028-6 Thickness:6mm-450mm Width:1200mm-4200mm Length:3000mm-18000mm Surface Treatment:Shot blasting and painting or coated Main application of EN10028-6 P460Q are used to build boilers and pressure vessels such as petroleum, chemical ...

P460QL2 steel plate application - pressure vessel steel ...

As a P460QL2 steel plate application Factory in China- Cold rolled steel plate price. Toggle navigation. ... EN10028-3 P460NL2,Pressure vessel steel plate P460NL2 steel plate,p355ql1boiler steel plate,p460q pressure vessel steel plate,p460qh steel plate,p460ql1boiler steel plate,p355ql2 pressure vessel steel plate,p460ql2 steel sheet,p500q ...

Spain UNE P460Q steel - steel-grades

Haihong International Trade (HK) CO., Limited. Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. P460Q can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc. TEL:+86-816-3646575 FAX: +86-816-3639422

EN10028 6 P355QL1 steel plate application - pressure ...

Steel Name: EN10028-6 P355QH Boiler steel plate,EN10028-6 P355QH Pressure Vessel Steel plate , EN10028-6 P355QH Storage Tanks S teel plate .EN10028-6 P460Q,EN 10028-6 P460 Q STEEL PLATE. EN10028-6 P460Q standard specification forWeldable fine grain steels, quenched and tempered .. A516 Grade 70 Steel Plate - Co., Ltd. - htsteelmill

P460Q Boiler/Pressure Vessel Steel Plate-Henan HZZ Iron ...

P460Q Boiler/Pressure Vessel Steel Plate-En10028-6. 1.Material: En10028-6 P 460 Q boiler plate . 2. Application: P 460 Q pressure vessel steel plates are widely used in the fabrication of boilers and pressure vessels in industries such as shipbuilding, petrochemical and manufacturing.

Euronorm EN EN P460Q steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. EN P460Q can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

P460Q Boiler and Pressure Vessel Steel in Brazil

P460Q,P460Q PLATE,P460Q STEEL . Pressure vessel steel plate P460Q shall be rolling completely according to EN 10028-6 steel standard.These requirements outline the testing and retesting methods and procedures,permissible variations in dimensions and weight,quality and repair of defects,marking,loading,etc.

The Five Sectors for Steel Applications

Steel is both the most widely used and most recycled metal material on earth. From stainless and high-temperature steels to flat carbon products, steel in its various forms and alloys offer different properties to meet a wide range of applications.

Applications - Wear Plate Solutions by Alloy Steel

Typical fixed plant equipment consists of chutes, feed bins, fan boxes, crushers, screen plates, fan blades, cyclones and pipe spools. Fixed plant applications are engineered steel designed to the flow of mineral process handling applications.

EN10028-6 P460Q,EN 10028-6 P460 Q STEEL PLATE__Steel …

EN10028-6 P460Q,EN 10028-6 P460 Q STEEL PLATE. EN10028-6 P460Q standard specification forWeldable fine grain steels, quenched and tempered .. P460Q Grade has a good weldable and used in high temperature equipment and pressure vessel.. P…Q means the -20 degree and the impact energy is 27J. P…QH means the -20 temperature quality and the impact energy is 27J

EN10028 6 P460Q steel plate size - pressure vessel steel ...

We will give you the EN10028 6 P460Q steel plate size, pressure vessel steel plate grades plate competitive price, EN10028 6 P460Q steel plate size, pressure vessel steel plate grades plate good quality and best service from us. Mechanical Properties. Offer EN10028-6-P460Q,Pressure-Vessel-Boiler-Steel .

EN10028-6 P460Q Pressure Vessel And Boiler Steel Plate

Main Application: EN10028-6 P460Q Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. ... Any request for EN10028-6 P460Q Pressure Vessel And Boiler Steel Plate Email: …

P460Q Boiler Steel in Uzbekistan - rdblegend.co.in

Boiler steel plate P460Q EN 10028-6 Quenched and tempered. ... P460Q Boiler/Pressure Vessel Steel Plate-En10028-6. 1.Material En10028-6 P 460 Q boiler plate . 2. Application P 460 Q pressure vessel steel plates are widely used in the fabrication of boilers and pressure vessels in industries such as shipbuilding, petrochemical and manufacturing. ...

EN10028-6 P460Q tempering - Metal and Steel Ltd

P460Q tempering after quenching of reheated P460Q to below the critical temperature Ac1 (heating pearlite to austenite transformation start temperature) to the appropriate temperature, heat preservati

supplier of EN P355Q pdf,A36,Q235B,Q345B steel plate ...

EN10028-6 P355Q Pressure Vessel Steel plate - Katalor ...EN10028-6 P355Q Pressure Vessel Steel plate also can be called EN10028-6 P355Q Boiler steel plate,, EN10028-6 P355Q Storage Tanks Steel plate. EN10028-6 P355Q Heat Exchanger Steel Plate .It is widely used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project.[PDF]

An overview of Steel Plates- Metallurgy & Applications

Generally the plates used in this application are pre-fabricated structures; some of the applications are in bridges, ports, buildings, dams etc. Steel plates used for construction require high strength, toughness and good weldability [6-7]. The plate products are manufactured predominantly through TMCR, for …

Boiler steel plate|Pressure vessel steel plate--Steel ...

Normalised and NACE boiler steel plates and pressure vessel steel plate are widely used to build the high temperature tanks and boilers in morden industry.Xinsteel offer vast customers the best quality pressure vessel steel plate from China.

Boiler Steel Plates P420 - P355 P420 P460 A516 (China ...

If you want to know steel plates' mechanical property,chemical composition,specification and other techanical conditions,please feel freel to contact me or send email to sophialee0215(at)gmail(dot)com. 1. Name:Pressure Vessel and Boiler Steel Plate,P355,P420,P460,P500,P690. 2. Adopting Standard:EN10028. 3.[PDF]

Steel Solutions for wear and impact resistant applications

The use of Relia® 400, 450 and 500 plate will extend the service life of wear parts and machinery components over standard construction steel. • Abrasion resistance 3 to 6 times higher than 355 MPa-class construction steel • Easy to cut • Dimensional range up to 150 mm for 400 HB-class

Uses of Steel Plates | Career Trend

A steel plate is a broad and generic term for steel in the form of a plate. However, steel can be combined with other metals to form alloys, which can make them corrosion resistant, stronger or lighter. In addition to what alloy of steel plate is made, the thickness can range from 3/16 inch to several inches.

Boiler and Pressure Vessel Steel Plate - Wholesaler From ...

Name:Boiler and Pressure Vessel Steel Plate. Application: Widely used in petroleum, chemical industry, power plants, boilers and other fields, such as to produce reactors, heat exchangers, separators, spherical tank, oil tank, LPG tanks, nuclear reactor pressure shell, boiler drum, liquefied petroleum gas cylinders, hydropower high-pressure pipes, turbine vortex shells and other equipment ...

C45 steel Applications,C45 steel Physical properties steel ...

C45 steel is a medium carbon steel is used when greater strength and hardness is desired than in the "as rolled" condition.Extreme size accuracy, straightness and concentricity combine to minimize wear in high speed applications. Turned, ground and polished.[PDF]

Plate for pressure vessel applications

Plate for pressure vessel applications Carbon manganese pressure vessel steel plate . For further information, contact: ArcelorMittal South Africa, PO Box 2, Vanderbijlpark 1900. Toll free number 0800 005043 Care has been taken to ensure that the information in this data sheet is accurate. ArcelorMittal South Africa does not, however, assume ...

Steel Plate, Strip and Tube Descaling - Wheelabrator

Steel sheet, plate and section descaling machines, otherwise known as Roller Conveyor Blast Machines, are designed for the mechanical descaling and/or preservation of steel surfaces in one pass. At Wheelabrator you can blast plate widths of up to 5m, at a speed of 6m per hour.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.